URBAN OUTFITTERS MABELLE MIRROR User manual

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable c
opyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution
or other infringement will be
prosecuted.
Page 1 of 3
TOOLS REQUIRED BUT NOT INCLUDED:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoiddirect exposure to sunlight. Do notplace over heat or Air conditioning
vents.Adjust levelers so that the furniture sits flaton uneven floors.
Blot spills do not rub, with a clean white
cloth.Do not use harsh chemicals.
Before cleaning anypart test a small spot in a hidden
area.You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
C D E F G H
4X 4X 4X 2X 3x32mm 2X 3x19mm 2X
MABELLE MIRROR
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable cop
yright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution o
r other infringement will be
prosecuted.
Page 1 of 3
TOOLS REQUIRED BUT NOT INCLUDED:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoiddirect exposure to sunlight. Do notplace over heat or Air conditioning
vents.Adjust levelers so that the furniture sits flaton uneven floors.
Blot spills do not rub, with a clean white
cloth.Do not use harsh chemicals.
Before cleaning anypart test a small spot in a hidden
area.You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
C D E F G H
4X 4X 4X 2X 3x32mm 2X 3x19mm 2X
EFFIE MIRROR
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 3
TOOLS REQUIRED BUT NOT INCLUDED:
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoiddirect exposure to sunlight. Do notplace over heat or Air conditioning
vents.Adjust levelers so that the furniture sits flaton uneven floors.
Blot spills do not rub, with a clean white
cloth.Do not use harsh chemicals.
Before cleaning anypart test a small spot in a hidden
area.You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
C D E F G
H
4 X 4 X 4 X 2X 3x32mm 2
X 3x19mm 2X

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable c
opyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution
or other infringement will be
prosecuted.
Page 2 of 3
STEP 1
Align wooden french cleat (B) to wall
. Mark the top of the Mirror with a pencil. Measure the center of
the mirror. The distance to the holes
location is 49.2/5” or 1255 mm from the floor. Measure and mark
these 4 spots. It is best to use a level
to make sure the mirror hangs square.
Insert anchors (C) and screw them in
to the wall flush. Screw in the screws (D) with a Phillips head
screw- driver (not included).
STEP 2
With help hang the mirror onto w
ooden french cleat (B).
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable cop
yright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution o
r other infringement will be
prosecuted.
Page 2 of 3
STEP 1
Align wooden french cleat (B) to wall.
Mark the top of the Mirror with a pencil. M
easure the center of
the mirror. The distance to the holes lo
cation is 49.2/5” or 1255 mm from the floo
r. Measure and mark
these 4 spots. It is best to use a level t
o make sure the mirror hangs square.
Insert anchors (C) and screw them int
o the wall flush. Screw in the screws (D) w
ith a Phillips head
screw- driver (not included).
STEP 2
With help hang the mirror onto wooden
french cleat (B).
EFFIE MIRROR
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution or other infringement will be
prosecuted.
Page 2 of 3
STEP 1
Align wooden french cleat (B) to wall. Mark the top of the Mirror with a pencil. Mea
sure the center of
the mirror. The distance to the holes location is 49.2/5” or 1255 mm from the floor
. Measure and mark
these 4 spots. It is best to use a level to make sure the mirror hangs square.
Insert anchors (C) and screw them into the wall flush. Screw in the screws (D) wit
h a Phillips head
screw- driver (not included).
STEP 2
With help hang the mirror onto wooden french cleat (B).
MABELLE MIRROR
Assembly Instructions

EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable c
opyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution
or other infringement will be
prosecuted.
Page 3 of 3
STEP 3
To prevent injury and property
damage from unexpected tipping of furniture.
1. Attached the mounting bracket h
orizontally to the top back edge of the furniture. Insert the short
screws through the holes in the
bracket and tighten securely using screwdriver. Please contact your
local hardware store to get the c
orrect anchor for your wall type.
2. Determine where the furniture is
to be placed andmark location on the wall for the other mounting
bracket crew holes. It should be
placed approximately 2” below the bracket mounted to the furniture.
3. Attached the mounting bracket
vertically to the wall by inserting the long screws provided through the
hole in the bracket and tightenin
g securely using screwdriver. Please contact your local hardware store
to get the correct anchor for you
r wall type.
4. Place the furniture so the bracke
t on the back edge are in line with the brackets on the wall.
5. Lace an end of the nylon restrai
nt strap down through each bracket. Bring both ends together and slide
the thin end of the strap through
the receiving end of the strap until snug.
6. Check to make sure the strap is
securely laced and locked to the bracket.
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable cop
yright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution o
r other infringement will be
prosecuted.
Page 3 of 3
STEP 3
To prevent injury and property da
mage from unexpected tipping of furniture.
1. Attached the mounting bracket ho
rizontally to the top back edge of the furnitur
e. Insert the short
screws through the holes in the b
racket and tighten securely using screwdriver
. Please contact your
local hardware store to get the co
rrect anchor for your wall type.
2. Determine where the furniture is t
o be placed andmark location on the wall for
the other mounting
bracket crew holes. It should be p
laced approximately 2” below the bracket m
ounted to the furniture.
3. Attached the mounting bracket ve
rtically to the wall by inserting the long screw
s provided through the
hole in the bracket and tightening
securely using screwdriver. Please contact y
our local hardware store
to get the correct anchor for your
wall type.
4. Place the furniture so the bracket
on the back edge are in line with the bracket
s on the wall.
5. Lace an end of the nylon restrain
t strap down through each bracket. Bring both
ends together and slide
the thin end of the strap through t
he receiving end of the strap until snug.
6. Check to make sure the strap is s
ecurely laced and locked to the bracket.
EFFIE MIRROR
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction,adaptation, distribution or other infringement will be
prosecuted.
Page 3 of 3
STEP 3
To prevent injury and property damage from unexpected tipping of furniture.
1. Attached the mounting bracket horizontally to the top back edge of the furniture.
Insert the short
screws through the holes in the bracket and tighten securely using screwdriver.
Please contact your
local hardware store to get the correct anchor for your wall type.
2. Determine where the furniture is to be placed andmark location on the wall for t
he other mounting
bracket crew holes. It should be placed approximately 2” below the bracket mou
nted to the furniture.
3. Attached the mounting bracket vertically to the wall by inserting the long screws
provided through the
hole in the bracket and tightening securely using screwdriver. Please contact you
r local hardware store
to get the correct anchor for your wall type.
4. Place the furniture so the bracket on the back edge are in line with the brackets
on the wall.
5. Lace an end of the nylon restraint strap down through each bracket. Bring both
ends together and slide
the thin end of the strap through the receiving end of the strap until snug.
6. Check to make sure the strap is securely laced and locked to the bracket.
MABELLE MIRROR
Assembly Instructions