urmet domus UFO 4K 1093/185FE User manual

DS1093-582
Mod.
1093
IP H.265 Fish Eye Cameras
. ..
UFO 4K Ref. 1093/185FE - UFO 5M Ref. 1093/186BN
Canister 5M Ref. 1093/187C
USER MANUAL

2
DS1093-582
LIST OF CONTENTS
1 Introduction................................................................................................................................................4
2 Product Description ..................................................................................................................................5
2.1 Technical features .....................................................................................................................5
2.2 Opening the Box........................................................................................................................6
2.3 Warnings ...................................................................................................................................6
3 Overview.....................................................................................................................................................8
3.1 Range of Application .................................................................................................................8
3.2 Product description....................................................................................................................8
3.3 Operating environment ..............................................................................................................9
4 Device Connection ....................................................................................................................................9
4.1 IP Camera Connector Layout (Where Present) ........................................................................9
5 Operating instructions ........................................................................................................................... 10
5.1 Connection Check .................................................................................................................. 10
5.2 Device Searching ................................................................................................................... 11
5.3 Installation of Controls and Login to System .......................................................................... 12
6 Login........................................................................................................................................................ 12
7 Live .......................................................................................................................................................... 13
7.1 Fish Eye functions (Live and Playback) ................................................................................. 14
7.1.1 Types of installation ....................................................................................................................................14
7.1.2 Display ........................................................................................................................................................14
7.1.3 Ceiling installation .......................................................................................................................................14
7.1.4 Wall installation...........................................................................................................................................20
7.1.5 Installation on a horizontal surface..............................................................................................................23
7.1.6 Installation on an inclined plane ..................................................................................................................29
8 Local settings ......................................................................................................................................... 33
9 Playback .................................................................................................................................................. 34
10 Remote Setting ....................................................................................................................................... 35
10.1 Display Configuration ............................................................................................................. 35
10.1.1 Live .............................................................................................................................................................35
10.1.2 Image Control .............................................................................................................................................36
10.1.3 Privacy Zone...............................................................................................................................................37
10.1.4 ROI .............................................................................................................................................................37
10.2 Record Parameters ................................................................................................................ 38
10.2.1 Rec Parameters .......................................................................................................................................... 38
10.2.2 Schedule.....................................................................................................................................................39
10.3 Network .................................................................................................................................. 39
10.3.1 Network.......................................................................................................................................................39
10.3.2 Video Streaming .........................................................................................................................................40
10.3.3 E-Mail Configuration ...................................................................................................................................41
10.3.4 DDNS Configuration ...................................................................................................................................42
10.3.5 IP Filter .......................................................................................................................................................43
10.3.6 RTSP ..........................................................................................................................................................43
10.3.7 FTP.............................................................................................................................................................44
10.4 Alarm ...................................................................................................................................... 45
10.4.1 Motion.........................................................................................................................................................45
10.4.2 I/O Alarm:....................................................................................................................................................45
10.4.3 Lens Blocking..............................................................................................................................................46
10.5 Device..................................................................................................................................... 47
10.5.1 HDD (where included).................................................................................................................................47
10.5.2 Audio...........................................................................................................................................................47
10.5.3 Logs............................................................................................................................................................48
10.6 System.................................................................................................................................... 49
10.6.1 General .......................................................................................................................................................49
10.6.2 User Configuration ......................................................................................................................................50
10.6.3 System Info.................................................................................................................................................50
10.7 Advanced settings .................................................................................................................. 51
10.7.1 System Update ...........................................................................................................................................51
10.7.1 Load Default:...............................................................................................................................................51
10.7.2 System Maintenance...................................................................................................................................51
ENGLISH

3
DS1093-582
11 Software for Mobile Devices ................................................................................................................. 52
11.1 Smartphone Device ................................................................................................................ 52
11.1.1 Urmet IUVS plus Mobile Software...............................................................................................................52
11.1.1.1 Live..........................................................................................................................................................53
11.1.1.1.1 Opening a channel ........................................................................................................................................................54
11.1.1.1.2 Recording a live video stream.......................................................................................................................................54
11.1.1.1.3 PTZ Control ...................................................................................................................................................................55
11.1.1.2 Playback..................................................................................................................................................55
11.1.1.3 Record .....................................................................................................................................................57
11.1.1.4 Images.....................................................................................................................................................57
11.1.1.5 Remote Settings ......................................................................................................................................58
11.1.1.6 Alarm .......................................................................................................................................................58
11.1.1.7 Device......................................................................................................................................................59
11.1.1.8 Help .........................................................................................................................................................60
11.2 P2P function ........................................................................................................................... 61
12 Fisheye IP Cameras Technical Specifications .................................................................................... 63
13 Maximum recording time with SD Card ............................................................................................... 65
13.1 Ref. 1093/185FE– Ref. 1093/186BN...................................................................................... 65
14 Appendix ................................................................................................................................................. 69
14.1 Router Port Forwarding .......................................................................................................... 69
14.2 Frequently Asked Questions .................................................................................................. 70

4
DS1093-582
1 INTRODUCTION
Thank you for purchasing our integrated and developed network camera products for network video monitoring. Our range
includes the following products: Storage Network Bullet, Wireless Storage Network Bullet, IR Network Dome, IR Network
Weather-Proof and High-Speed Network Ball, fisheye cameras. High-performance single SOC chips are used in the media
processor for audio/video acquisition, compression and transmission/transfer. A standard H.265 encoding algorithm is
applied to ensure clear and smooth video representation and high transfer performance. The integrated Web server
offers users access to real-time surveillance and remote control of the front-end camera through the Internet Explorer
browser.
The network cameras are easy to install and operate. They are ideal for large and medium-sized companies,
governmental projects, large malls, supermarket chains, intelligent buildings, hotels, hospitals, schools and other public
places, as well as for applications requiring remote network video transmission and monitoring.
Instructions:
For the purposes of this manual, an IP camera refers to a network camera.
The default factory IP address for the IP camera is 192.168.1.168.
The default factory administrator username for the IP camera is admin (in lowercase) and the password is admin (in
lowercase).
The default Web port number is 80 and the client port number is 9988.
Statement:
Some information contained in this manual may differ from the actual product. For any problems that cannot be solved
with the help of this manual, please contact our technical support or an authorised dealer. This manual may be subject to
change without prior notice.

5
DS1093-582
2 PRODUCT DESCRIPTION
URMET S.p.A Ref. 1093/186BN and Ref. 1093/187C are 5MegaPixel IP cameras, 1093/185FE is an 8MegaPixel IP
camera. The cameras can be controlled via a TCP/IP network connection.
2.1 TECHNICAL FEATURES
High-performance Hisilicon media processor with advanced functions.
CMOS Progressive Sensor
Optimized H.265/H.264 video compression algorithms; multi-stream transmission ensures high definition image
transmission on both narrowband and wideband.
Support simultaneous connection of up to 10 video streams (if the IP camera is connected to the NVR, the NVR
will occupy 3 streams, leaving 7 free video streams. If the IP camera is connected to the Browser only, 10 video
streams will be available).
SD Card support up to 128GB (for Fishe Eye UFO camera models). The integrated Web Server allows multi-
browser use (Internet Explorer, Firefox Mozilla up to version 5.1 and Safari 6.0 for MAC O.S.) for real-time on-site
monitoring, setup and management.
Managed from Urmet UVS Client Software
Mobile software for the following platforms: iOS (Iphone and iPad), Android (smartphones and tablets).
Remote system firmware updates.
Support LAN and Internet.
Support ONVIF and RSSP protocols.
Support multiple network protocols, such as TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP,
RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Support motion detection alarm function (the user can set the area and sensitivity) and sensor/alarm out function
(for Fishe Eye UFO.camera models). Support privacy zone function.
POE (optical) power supply function.
Support snapshot. Image upload via FTP or E-mail.
Log Support: System logs, network logs, parameter logs, alarm logs, user logs, recording logs, storage logs and
all logs
Intelligent video analysis function (Perimeter intrusion detection, line crossing detection, stationary object
detection, etc.).
Reset Button supported (where included)
Support automatic download recovery function. Automatic connection in the event of network interruption.
Note: The specifications of different products may change slightly.

6
DS1093-582
2.2 OPENING THE BOX
Check that the packaging and the contents are not visibly damaged. Contact the retailer immediately if parts are either
missing or damaged. Do not attempt to use the device in this case. Send the product back in its original packaging if
damaged.
ACCESSORIES PROVIDED
1 IP camera unit
1 installation bag
1 Quick Guide
1 Mini-CD containing Urmet Software


IMPORTANT NOTE:
Accessories may be changed without prior notice.
2.3 WARNINGS
Power supply
Before connecting the equipment to the electrical outlet, ensure that the nameplate specifications match
those of the mains power supply.
It is advisable to install a suitable disconnection and protection switch upstream from the equipment.
In the event of failure or malfunction, disconnect the power supply at the main switch.
Use only the power supply unit provided with the product.
Safety precautions
Keep the device away from rain and dampness to prevent the risk of fire and electrocution. Do not introduce
any material (solid or liquid) inside it. If this should accidentally occur, disconnect the device from the mains
and have it inspected by qualified personnel.
Never open the device. In all cases, contact qualified personnel or an authorised service centre for repairs.
Keep the device away from children, to prevent accidental damage.
Do not touch the device with wet hands to prevent electrical shock or mechanical damage.
Do not use the device if it falls or if the external casing is damaged. Continued use of the device in such
conditions could cause an electric shock. In such cases, contact the retailer or authorised installer.
Installation precautions
Do not install the camera in places exposed to rain or humidity. In these situations, use the special cases.
Avoid pointing the camera directly towards sunlight or other intense sources of light, even when switched
off; the subject to be filmed should not be against the light.
Avoid pointing the camera towards reflecting objects.
The presence of certain types of light (e.g. coloured fluorescent light) can distort the colours.
Do not position this device on an unstable surface, such as a tottering or slanted table. The device could
fall, causing injury or mechanical failures.
Stop using the device if water or some other material penetrates inside it, to prevent risk of fire or
electrocution. In such cases, contact the retailer or authorised installer.
Do not cover the device with a cloth while it is running to prevent deformation of the external casing and
overheating of internal parts, causing risk of fire, electrocution and mechanical failure.
Keep magnets and magnetised objects away from the device to prevent faults.
Do not use the device in the presence of smoke, vapour, humidity, dust or intense vibrations.
Do not operate the device immediately after moving it from a cold place to a warm place and vice versa.
Wait on average for three hours: this will allow it to adapt to the new environment (temperature, humidity,
etc. ).
Precautions for use
Check that the device is not damaged after removing it from the packaging.
Ensure that the working environment is not too humid and that the temperature is within the indicated range.
Avoid pointing the camera towards sunlight to prevent damage to the sensor.
Cleaning the device
Rub gently with a dry cloth to remove dust and dirt.
Dip the cloth in mild detergent if dirt cannot be removed with a dry cloth alone.
Do not use spray products to clean the device. Do not clean the device using volatile liquids (such as petrol,
alcohol, solvents, etc.) or chemically treated cloths to prevent deformation, deterioration or scratches to the
paint finish.
Disconnect the device from the electrical outlet before any cleaning or maintenance operations.
Recording images
This device is not designed as a burglar-control system but mainly to transmit and record images. URMET
S.p.A. may not be held liable for loss or damage caused by thefts from the user's premises.

7
DS1093-582
Make a test recording before using the device to ensure that is working correctly. Please note that URMET
S.p.A. is not liable for any loss of stored data or damage caused by incorrect installation, improper use or
malfunctioning of the device.
This device contains precision electronic components. Protect the device from bumps and jolts to ensure
proper recording of images.
Privacy and Copyright
The IP camera is designed for CCTV systems. The recording of images is subject to the laws in force in
the country of use. Recording of images protected by copyright is forbidden.
Product users are responsible for checking and complying with all local rules and regulations regarding
monitoring and the recording of video signals. The manufacturer SHALL NOT BE LIABLE for any use of
this product that is not in compliance with the laws currently in force. For more information please visit
http://www.garanteprivacy.it
Firmware upgrade
You are advised to refer periodically to URMET S.p.A. Customer Service Technical Assistance to check
the availability of firmware updates.
Network configuration
The camera default setting is DHCP mode. If the installation network does not support dynamic
addressing (DHCP), the device will automatically switch to the factory-set IP address 192.168.1.168. Use
Urmet's “Device Config Tool” software to modify the factory IP address and other camera network
settings to prevent any conflict with other devices in the network.
Once the camera is properly connected and configured on the IP network, its video and settings can be
viewed from a PC or smartphone.
Network connections
When connecting a remote PC (using client software or a browser), it should be borne in mind that any
video channel used on the PC will have a “unicast” connection (TCP, RTP, UDP).
The device can support up to 10 “unicast” connections, i.e. the video stream can be viewed from a
maximum of 10 remote (PC or smartphone) devices at the same time, depending on the available
bandwidth.

8
DS1093-582
3 OVERVIEW
3.1 RANGE OF APPLICATION
These network cameras with their powerful image processing capacity can be used in various public places, such as
malls, supermarkets, schools, factories and workshops, as well as in environments requiring HD images, such as banks
and traffic control systems, as illustrated in the figure below:
3.2 PRODUCT DESCRIPTION
An IP camera is an online digital surveillance camera, equipped with a web server and capable of independent operation,
providing the user with access to real-time monitoring from any location through a web browser or client software.
These IP cameras feature the most advanced HiSilicon solution: an integrated media processing platform for audio/video
capture, compression and network transmission on a single board. This is in compliance with H.264/H.265 High Profile
encoding standards. Remote users can have access to real-time monitoring by entering the IP address or domain name of
the IP camera in the web browser. This network camera solution is suitable for residential or business environments, as
well as a wide range of situations that require remote network video monitoring and transmission. The IP cameras are
easy to install and operate.
The IP cameras can be controlled by several users with different levels of authorisation.
IP cameras allow for mobile detection and sending of e-mail and snapshots in case of emergency; the videos or image
snapshots are then stored to the SD card - if available - for subsequent retrieval.
Monitoring centre

9
DS1093-582
3.3 OPERATING ENVIRONMENT
Operating system: Windows 7/Windows 8/Windows 2008 (32/64-bit), Windows 2003/Windows XP/Windows 2000 (32-bit)
CPU: Intel Core Duo II processor or higher
Memory: 1G or higher
Video memory: 256M or higher
Display: 1024 × 768 or higher resolution
Internet Explorer 6.0 or later
4 DEVICE CONNECTION
The IP camera can be connected in two ways:
•Connection to a PC
Connect the IP camera to the PC using a direct network cable, with the power input connected to a 12VDC
adaptor, and enter the IP addresses of the PC and the camera in a network segment. The IP camera will
communicate with the PC within one minute after being switched on if the network is working properly.
•Connection to a router/switch
This solution is more commonly used in connecting the IP camera to Internet; in this case, the camera and PC are
connected to the LAN ports of a router/switch, with the camera gateway set to the IP address of the router.
4.1 IP CAMERA CONNECTOR LAYOUT (WHERE PRESENT)
1. BNC Interface: Local video signal output.
2. Audio Output Interface: RCA female head (white), can connect with external devices, such as speakers.
3. Audio Input Interface: RCA female head (red), can connect with input devices, such as a microphone.
4. RJ45 Interface (Network Interface): Connector for a RJ45 network cable.

10
DS1093-582
5. Power Interface: DC 12V.
6. eset Button: The device will restore the default settings if this button is pressed and held for 3 seconds.
7. Alarm Interface: Including alarm input and output interface.
8. ①,② as input alarm interface setting, ③,④ for output alarm setting.
5 OPERATING INSTRUCTIONS
5.1 CONNECTION CHECK
• The default factory IP address for the IP camera is 192.168.1.168 and the subnet mask is 255.255.255.0. Allocate to
your computer an IP address in the same network segment as the IP camera, for example, 192.168.1.69, and the
same subnet mask as that of the IP camera.
• Test whether the IP camera is connected properly and started normally by clicking on Start > Run and entering
"cmd" and then pressing ENTER, then enter "ping 192.168.1.168" in the command line window.
•Check whether the IP camera is accessible. If the PING command is run successfully, it means that the IP camera
is operating normally and the network is connected properly. If the PING command fails, check the IP address and
gateway settings of the PC, as well as the network connection.

11
DS1093-582
5.2 DEVICE SEARCHING
• Feedback: The Device Config Tool function can be used for device searching across network segments. Before
using Device Config Tool, click on the local connection icon in the bottom right corner of the desktop;
• Add IP addresses of several network segments in the TCP/IP setting for local connection (as shown below). You
can run this tool to search for any device with an IP address in the same network segment.
Note:
The Device Config Tool function uses the multicast protocol for device searching across segments; however, since any
firewall prevents traffic of multicast data packets, any firewalls must be disabled for information on the device to be
acquired.
Online device search procedure
1. Launch the Device Config Tool by selecting (double-clicking) the icon .
The function will search and display any online device and its IP address, port number, web port number, number of
channels, configured name, device type and version, subnet mask, gateway, MAC address and connection pattern
and state.

12
DS1093-582
5.3 INSTALLATION OF CONTROLS AND LOGIN TO SYSTEM
Before using the IE (Internet Explorer) browser to access the IP camera for the first time, the plug-in components must first
be installed, as follows:
Access the IP address of the IP camera to automatically download the controls from it.
Select an option in the plug-in installation pop-up dialogue box to run the installation process.
6 LOGIN
Open IE and enter the IP address of the camera (http://192.168.1.168) to bring up the login window shown below:
Login Interface for IP H.265 cameras.
In the login window you can choose a language for the IE client. Enter your user name (admin by default) and password
(admin by default) and then press OK

13
DS1093-582
7 LIVE
Some of the buttons in the preview frame are described below.
: Button for setting the colour, brightness, contrast, saturation and sharpness of the frame.
: Reads the recording file from the SD card and plays it back through the browser (if SD card support is
provided).
: Access to the device settings menu to customise the settings of various parameters.
: (Local setting) For snapshot, video file type and storage path settings.
: Help information (current user, Web browser and plug-in versions) and logout button for returning to the
login page.
: Stop/Start Live video.
: Adjustment of preview frame ratio, Full Screen.
: Preview control buttons - Record Video Open Video, Snap, and Sound On/Off,
Microphone (from left to right).
: Dynamic switching of the bit stream for the preview frame.

14
DS1093-582
7.1 FISH EYE FUNCTIONS (LIVE AND PLAYBACK)
7.1.1 TYPES OF INSTALLATION
From the LIVE screen it is possible to specify the type of camera installation ("Mount Type"): on the ceiling, on a wall, on a
horizontal surface or an inclined surface.
7.1.2 DISPLAY
The LIVE Display Mode currently shown on the PC can be changed, depending on the type of installation selected:
•Fisheye view: wide angle obtained through fisheye lenses
•Panorama view: fisheye view adapted to a rectangular view
•3D Cylinder View: fisheye view adapted to a 3D cylinder view
•VR view: 3D fisheye view after the adjustment. Use the mouse to drag and manipulate in order to change the viewing
angle; the mouse wheel can be used to gradually enlarge the perspective image. Select an area with the mouse and
right double-click to navigate to the corresponding area and show the PTZ image of this area
7.1.3 CEILING INSTALLATION
The fisheye camera is mounted on the ceiling on the scene. There are 12 display modes, as shown in the figure:

15
DS1093-582
1) VR view, double click with the right mouse button to begin navigation;
2) 3D Cylinder, as shown in the figure:
3) 2PTZ, as shown in the figure:

16
DS1093-582
4) 4PTZ, as shown in the figure
5) 180° Panorama view, as shown in the figure:
6) 360° Panorama view, as shown in the figure:
7) 360° Panorama View + 1PTZ (Panorama View, the different coloured area represents different PTZ viewing
angles, select the range of the corresponding PTZ line and drag to change the viewing angle, as shown in the figure):

17
DS1093-582
8) 360° Panorama View + 3PTZ (Panorama View, the different coloured areas represent different PTZ viewing
angles, select the range of the corresponding PTZ line and drag to change the viewing angle, as shown in the figure):
9) 360° Panorama View + 6PTZ (Panorama View, the different coloured areas represent different PTZ viewing
angles, select the range of the corresponding PTZ line and drag to change the viewing angle, as shown in the figure):

18
DS1093-582
10) 360° Panorama View + 8PTZ (Panorama View, the different coloured areas represent different PTZ viewing
angles, select the range of the corresponding PTZ line and drag to change the viewing angle, as shown in the figure):
11) Fisheye + 3PTZ (Fisheye View, the different coloured areas represent different PTZ viewing angles, select the
range of the corresponding PTZ line and drag to change the viewing angle, as shown in the figure):

19
DS1093-582
12) Fisheye + 8PTZ (Fisheye View, the different coloured areas represent different PTZ viewing angles, select the
range of the corresponding PTZ line and drag to change the viewing angle, as shown in the figure):

20
DS1093-582
7.1.4 WALL INSTALLATION
The fisheye camera is mounted on the ceiling on the scene. There are 7 display modes, as shown in the figure:
1) VR view, double click with the right mouse button to begin navigation;