USX-MOUNT XML032-K User manual

XML032-K
INSTRUCTION MANUAL
USA-C0
For 37-86" TV
If you have any questions along the way, just message
to us. We’re ready to help!
R

MAX:600mm/23.62"
(MIN:200mm/7.87")
MAX:400mm/15.75"
(MIN:100mm/3.94")
Before getting started, let’s check below lists to make sure it is just right for you!
2
3
4
5
Does your TV
(including accessories)
weigh MORE than
132 lbs. (60 kg)?
What is your
wall made of?
Do you have
all the tools
needed?
(NOT INCLUDE)
CAUTION
No? Perfect – you may continue.
Yes? This mount is NOT compatible.
Drywall with
wood studs?
CAUTION: DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
?
● This product is designed for use in wood stud, solid concrete walls - DO NOT install into drywall alone
● The wall must be capable of supporting five times the weight of the TV and mount itself
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
1
Check your TV
VESA is within
Min and Max size
No? This mount is NOT compatible.
Yes? Perfect !
Tape
Measure Pencil Screw driver
Electric
Drill
1/2 in.
(13 mm)
Socket
Wrench
Unsure?
Mail to us via Amazon.
CAUTION: PLEASE READ ENTIRE MANUAL PRIOR TO USE AND SAVE THESE INSTRUCTIONS
!
Per fect !
CAUTION:
DO NOT
install into
drywall alone
!
Stud
Finder
7/32 in.
(5.5 mm)
Wood
Drill Bit
3/8 in.
(10 mm)
Masonry
Drill Bit
Hammer
Concrete Install
Wood Stud Install
Solid concrete
Per fect !
132 LBS
(60 kg)
!
2

TV INTERFACE 3-D
WALL PLATE TOP VIEW - EXTENDED
Dimensions
144mm
[5.67in]
9mm
[0.35in]
406mm
[16.00in]
382mm
[15.02in]
3
FULLY ASSEMBLED MOUNT TOP VIEW - RETRACTED
SIDE VIEW - EXTENDED
SIDE VIEW - EXTENDED
+45°
178mm
[7.03in]
429mm
[16.90in]
435mm
[17.13in]
67mm
[2.62in]
697mm
[27.42in]
+5°
-15°
MAX:600mm[23.62"]
MIN:200mm[7.87"]
400mm
[15.75in]
MIN: 100mm
[3.94n]

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1
TV Brackets
x2
Spacers
TV Screws
M4x12mm
M6x12mm
M8x25mm
M4x30mm
M6x35mm
M8x45mm
x4 x4
x4 x4
x4 x4
M6x17mm
M8x22mm
M4 M6
10mm
2.5mm
Washers
x4
x4 x4
x8 x4
x4
Parts and Hardware
07
a
b
c
d
e
f
gh
ij
k l
!
4

Parts and Hardware for STEP 2
Lag Bolt
x4
Wall Plate Unit
x1
Allen Key
x1
Extension Arm
M6x16mm Bolt
x4
M6x8mm Bolt
x2
Extension Arm
x2 x2
End Support
x2
Parts and Hardware for STEP 3
x4
Velcro x3
Mounting template
06
01
02 03 0504
08 09 10
Level
16"(406.4mm)
8"(203.2mm)
5
Contact us and message to us to have these
additional pieces shipped directly to you.
Concrete Wall Anchor
Ø10x50mm 4pcs
Concrete wall anchor (NOT INCLUDED)
M6x8mm Bolt

M8
M6
M4
1-1 Select TV Screws
STEP 1 Attach Brackets to TV
6

7
1-2 Figure out the suitable position of brackets
INSTALL UP/DOWN IF NEEDED TV BRACKETS MUST BE LEVEL
LOW MOUNTING HOLES HIGH MOUNTING HOLES
07
!
!

8
Tips: If you need to combine M6/M8(c/e/f) screws with
2.5mm spacers( i ), you have to remove the inner circle.
1-4 Attach the TV Plate
No!
1-3 Need Spacer?
d
abc
lk
efk l
gh i j
No, choose suitable screws and washers.
Yes, choose suitable screws, washers and spacers.
07

Centre line
CAUTION: Avoid potential personal injury or property damage!
● Drywall covering the wall, must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
● Maximum horizontal space between fasteners: 16 in. (406 mm)
● Stud center must be verified
1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using a thin nail,
or an edge to edge stud finder.
2. Position the mounting template at your desired height and line up the holes with your stud center line.
Level the wall plate and mark the hole locations.
Again, find another wood stud
16"
Mounting template
STEP 2A Attach Wall Plate to Wall Wood Stud Option
1 2
!
16"(406.4mm)
Level
9

3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm). Be sure to drill into the center
of the studs.
4. Install wall plate using four lag bolts . Tighten the lag bolts only until they are pulled firmly
against the wall plate.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
Go to STEP 3 on PAGE 13.
2.5"(64mm)
7/32"
(5.5mm)
No!
34
06 01
!
!
06
01
10
UP

3/8"
(10mm) 2.5"(64mm)
CAUTION: Avoid potential personal injury or property damage!
● Mount the wall plate assembly directly onto the concrete surface
● Minimum solid concrete thickness: 8 in. (203 mm)
1. Position the mounting template on the wall at your desired height. Level the wall plate and mark the
hole locations.
2. Drill four pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm).
Mounting template
STEP 2B Attach Wall Plate to Solid Concrete Wall
1 2
06
!
!
16"(406.4mm)
Level
11

3. Insert four anchors.
CAUTION: Be sure the anchors are seated flush with the concrete surface.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
4. Insert wall plate using four lag bolts . Tighten the lag bolts only until they are pulled firmly
against the wall plate.
34
06 01
!
!
No!
12
Concrete Wall Anchor
(Not included)
Please contact us and message to us to have
these additional pieces shipped directly to you.
06
01
UP

STEP 3 Extension Arms and end support Assembly
13
Please make sure you install these extension arms in right direction.
Inside
Inside
Outside
Outside
08
09
02
05
10
10
10
05
03

Before hanging TV, please try to pull the mount to make sure that it has been assembled on the wall
tightly.
STEP 4 Wall Plate Installation Integrity Test
132 LBS (60 kg)
14

Hang TV/bracket assembly onto wall plate, wrap clips on bracket around extension arms and tighten
them using bolts .
TV
1 2
STEP 5 Hang and Secure TV to Wall Plate
04
15
05
04

6-1 TV leveling adjustment (±4°):
Loosen 4 leveling bolts on the rear of TV plate by
maximum 2 turns, adjust to level, and retighten to secure.
±4°
STEP 6 Adjustments
16
Loosen
Tighten
05

17
+5°
-15°
Tighten
Loosen
Tilting bolts
6-2 Tilting angle adjustment (+5°/-15°)：
Loosen handle and tilting bolt, adjust TV to your desired position,then tighten handle
and tilting bolt. Put the handle level when finish.
Handle
Tighten
Loosen
05
05

6-3 Cables manage:
Manage TV cables orderly and guide them through the velcros.
Velcro
18