USX-MOUNT XTL009 User manual

For 37-90" TV
XTL009
INSTRUCTION MANUAL
R
AUUS-C0
If you have any questions along the way, just message to us.
We’re ready to help!

2
Before getting started, let’s check below lists to make sure it is just right for you!
2
3
4
5
Does your TV
(including accessories)
weigh MORE than
132 lbs. (60 kg)?
What is your
wall made of?
Do you have
all the tools
needed?
(NOT INCLUDE) Tape
Measure
CAUTION
Pencil Screw
driver
Electric
Drill
No? Perfect – you may continue.
Yes? This mount is NOT compatible.
Drywall with
wood studs? CAUTION:
CAUTION: DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
Solid concrete ?
1/2 in.
(13 mm)
Socket
Wrench
Stud
Finder
7/32 in.
(5.5 mm)
Wood
Drill Bit
● This product is designed for use in wood stud, solid concrete walls - DO NOT install into drywall alone
● The wall must be capable of supporting five times the weight of the TV and mount itself
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Unsure?
3/8 in.
(10 mm)
Masonry
Drill Bit
Hammer
1
Check your TV
VESA is within
Min and Max size
No? This mount is NOT compatible.
Yes? Perfect !
MAX:600mm/23.62"
(MIN:200mm/7.87")
MAX:400mm/15.75"
(MIN:100mm/3.94")
DO NOT
install into
drywall alone
132 LBS
(60 kg)
CAUTION: PLEASE READ ENTIRE MANUAL PRIOR TO USE AND SAVE THESE INSTRUCTIONS
!
!
Per fect !Per fect !
Wood Stud Install
Concrete Install
Message to us via Amazon.
!

3
TV INTERFACE WALL PLATE
SIDE VIEW SIDE VIEW
203.2mm/8"
304.8mm/12"
406.4mm/16"
508mm/20"
609.6mm/24"
163mm/6.42" 222mm/8.74"
638.6mm/25.14"
Dimensions
MAX:600mm/23.62"
MIN:200mm/7.87"
MAX:400mm/15.75"
MIN:100mm/3.94" 420mm/16.54"
38mm/1.50"
0°~ -10°

TV Brackets
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for STEP 1
4
M4x12mm
M6x12mm
M4x30mm
M6x35mm
Spacers
TV Screws
x4 x4
x4 x4
M8x45mm
M6x17mm
M8x22mm
M4 M6
10mm
2.5mm
Washers
x4
x4
x4 x4
x8 x4
x4
a
b
f
e
d
gh
ij
k l
M8x25mm
x4
c
Parts and Hardware
!
06 x1 07 x1

5
Lag Bolt M8x60mm
Allen Key
M5x8mm Bolt
Wall plate(Left) Wall plate(Right)
Mounting template
Parts and Hardware for STEP 2
Level
04 x1 05 x1
01 x4
02 x4 03 x1
Contact us and message to us to have these
additional pieces shipped directly to you.
Concrete Wall Anchor
Ø10x50mm 4pcs
Concrete wall anchor (NOT INCLUDED)
R
203.2mm(8")
406.4mm(16")
609.6mm(24")
V0

6
Wall plate unit
Assemble Wall plate STEP 3
03
02
08
04
05

M8
M6
M4
1-1 Select TV Screws
7
STEP 1 Attach Brackets to TV

1-2 Figure out the suitable position of brackets
INSTALL UP/DOWN IF NEEDED TV BRACKETS MUST BE LEVEL
LOW MOUNTING HOLES HIGH MOUNTING HOLES
8
!
!

Tips: If you need to combine M6/M8(c/e/f) screws with
2.5mm spacers( i ), you have to remove the inner circle.
Yes, choose suitable screws, washers and spacers.
1-4 Attach the TV Plate
No!
No, choose suitable screws and washers.
1-3 Need Spacer?
9
e
df
k l
i
hj
g
b
a c
k l
06
07

Centre line
CAUTION: Avoid potential personal injury or property damage!
● Drywall covering the wall, must not exceed 5/8 in. (16 mm)
● Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
● Maximum horizontal space between fasteners: 24 in. (609.6 mm)
● Stud center must be verified
1. Locate your studs. Verify and mark the center of the stud by finding the stud edges using a thin nail,
or an edge to edge stud finder.
2. Position the mounting template at your desired height and line up the holes with your stud center line.
Level the mounting template and mark the hole locations.
Again, find another wood stud
16"/24"
Wall
Wall
Mounting template
10
STEP 2A Attach Wall Plate to Wall Wood Stud Option
!
Level

3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm). Be sure to drill into the center
of the studs.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
Go to STEP 3 on PAGE 14.
7/32"
(5.5mm)
4. Install wall plate using lag bolts . Tighten the lag bolts only until they are pulled firmly
against the wall plate.
Wall
11
2.5"(64mm)
!
0108
!
No!
Wall
01 08
Level

3/8"
(10mm) 2.5"(64mm)
CAUTION: Avoid potential personal injury or property damage!
● Mount the wall plate assembly unit directly onto the concrete surface
● Minimum solid concrete thickness: 8 in. (203 mm)
1. Position the mounting template on the wall at your desired height. Level the mounting template and
mark the hole locations.
2. Drill four pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.5 in. (64 mm).
Wall Wall
Mounting template
12
STEP 2B Attach Wall Plate to Solid Concrete Wall
!
Level
!

CAUTION: Be sure the anchors are seated flush with the concrete surface.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts.
3. Insert anchors.
No!
4. Insert wall plate using lag bolts . Tighten the lag bolts only until they are pulled firmly
against the wall plate.
Wall Wall
13
!
!
01 08
0108
Concrete Wall Anchor
(Not included)
Please contact us and message to us to have these
additional pieces shipped directly to you.
Level

Before hanging TV, please conduct "wall plate installation integrity test" first.
14
STEP 3 Hang and Secure TV to Wall Plate
132 LBS (60 kg)

Pull down
TV Brackets
TV
1 2
15
STEP 4 Hang and Secure TV to Wall Plate

Tilting angle adjustment (0°/-10°)：
Pull TV to your desired angle then fasten 2 tilting bolts with Allen key .
0°
-10°
Loosen
Tighten
16
STEP 5 Adjustments
03
03
03

Pull down
the straps
17
STEP 6 Take Down the TV from the Mount