v.link VL7-NBT2 User manual

v.LiNK
VL7-NBT2
11.09.2019
1
User Manual
v.LiNK Interface for BMW NBT2 systems with 6.5”, 8.8” or 10.25” monitor
Model name
VL7-NBT2
Released Date
2019-04-15
Manual Version
1.2
Language
English

v.LiNK
VL7-NBT2
11.09.2019
2
Features
A. Supports dynamic guide-lines (not all vehicles)
B. Full-screen modes for all vehicles, split mode with factory PDC graphics on 8.8” and 10.25” in some vehicles
C. Supports dynamic guide-lines position adjustment for 8.8" 10.25" screen in full-screen mode
D. Power supply output 12V (500mA) for rear-view and front camera (one for both)
E. Power supply output 12V (500mA) ACC
F. Support automatically switched to front view camera for 10 seconds after engaging D
Limitations: For vehicles with automatic transmission only!

v.LiNK
VL7-NBT2
11.09.2019
3
Delivery contents
Camera Interface LVDS Cables Power Harness

v.LiNK
4
Wiring Diagram

v.LiNK
5
Installation
Please note that the Quadlock connector of the vehicle harness can have optical wires. Transfer the optical wires of the
vehicle female Quadlock connector to the female Quadlock connector of the interface harness.

v.LiNK
6
DIP Switch Settings
ON (▼) OFF(▲)
DIP
ON (▼)
OFF(▲)
1-3
Car selection (see below)
4
Set always ON
5
Set always ON
6
Set always ON
7
Turn on front view camera
Turn off front view camera
8
Factory or no rear-view
camera
After-market rear-view
camera

v.LiNK
7
Car Model
No.1
No.2
No.3
1-4 series/X3/X4, 8.8 inch with OEM rear camera
OFF(▲)
OFF(▲)
OFF(▲)
1-4 series/X3/X4, 8.8 inch without OEM rear camera
ON (▼)
OFF(▲)
OFF(▲)
5 series 8.8 inch EVO with OEM rear camera
OFF(▲)
ON(▼)
OFF(▲)
5 series 8.8 inch EVO without OEM rear camera
ON(▼)
ON(▼)
OFF(▲)
1-4 series/X1/MINI 6.5 inch EVO
OFF(▲)
OFF(▲)
ON(▼)
5 series/7 series/X5/X6/i3 10.25 inch EVO
ON(▼)
ON(▼)
ON(▼)

v.LiNK
8
AV Switching (DVR-input)
Long time press MENU for 2 seconds to enter DVR if DVR available.

v.LiNK
9
Adjustment of driving path lines by touch-screen (vehicles with touch-screen only)
Engage R-gear.
Touch the screen for 20 seconds on a random spot. Guide-lines and 4 arrows will show. Use up, down, left, right to move
the guide-lines in the corresponding directions.

v.LiNK
10
Adjustment of driving path lines by iDrive
Engage R-gear.
Longpress MENU for 5 seconds. The picture will not change.
Use the knob directions up, down, left, right to move the guide-lines in the corresponding directions.
Push down the knob to confirm the position.