V-tech ABC Choo Choo User manual

USER'S MANUAL
™
ABC Choo Choo

1
Dear Parent:
At VTECH®we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and learn to the best of their
ability. Whether it’s introducing numbers and letters, identifying
colors and shapes, or stimulating senses with lights and music,
all VTECH® infant and toddler learning products encourage your
child’s natural growth and discovery skills.
When it comes to providing electronic learning products that en-
lighten, entertain and develop minds, at VTECH®we see the po-
tential in every child.

2
INTRODUCTION
Thank you for purchasing the VTECH®ABC Choo Choo™ learning toy!
We at VTECH®are committed to providing the best possible products to
entertain and educate your child. Should you have any questions or
concerns, please call our Consumer Services Department at 1-800-521-
2010 in the U.S. or 1-800-267-7377 in Canada.
TheVTECH®ABC Choo Choo™ isacharacterbasedrolltrainfor babies
6 months and up.An engaging voice sings as the train is pushed across
the floor while the colorful beads pop within the clear dome on the
smokestack. Three cartoon-like train sound effects and a wobbling face
give this little train a unique personality.
POPPING BEADS
“WOBBLY FACE”
LIGHT-UP
LETTER BUTTONS ON/OFF/MODE
SELECTOR SWITCH
WHISTLE
BUTTON
SPEAKER

3
INCLUDED IN THIS PACKAGE
- One VTECH®ABC Choo Choo™ learning toy.
- One instruction manual.
WARNING: All packing materials, such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the unit. Use a coin or screwdriver to
loosen the screw.
3. Install2new“AA”(UM-3/LR6)batteries
followingthediagraminsidethe battery
box.(Theuse of new alkalinebatteries
is recommended for maximum
performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.

4
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the equipment when the
unit will not be used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE: If for some reason the program/activity stops working, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3.Let the unit stand fora few minutes,then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada and a service representative will be happy to help you.

5
TO BEGIN PLAY
1. Slide the ON/OFF/MODE SELECTOR
SWITCHtotheTALKINGMODE( )or
MELODYMODE( )positiontoturnthe
unitON.
2. Toadjustthevolume,slidetheVOLUME
CONTROLSWITCH locatedontheside
oftheunittothe( )positionforLOW
VOLUMEorthe( )positionforHIGH
VOLUME.
3. Slide the ON/OFF/MODE SELECTOR
SWITCHtothe OFF ( )positiontoturn
theunitOFF.
NOTE:
Topreservebatterylife, the VTECH®ABC Choo Choo™ learningtoy will
gointo sleepingstatusafterseveral minuteswithoutinput.Itcan beturned
on again by pressing any button.

6
ACTIVITIES
A. Talking Mode
1. SlidetheON/OFF/MODESELECTOR
SWITCHtotheTALKINGMODE ( )
position. You will hear “All aboard!”
followed by a Toot! Toot! sound effect.
All the lights will flash with the sound.
2. Press the LETTER ‘A’ BUTTON to
hear “A” followed by a Toot! Toot!
soundeffect.Thecorresponding light
will flash with the sound.
3. Press the LETTER ‘B’BUTTON to
hear “B” followed by a chugging
sound effect. The corresponding
light will flash with the sound.
“All aboard!”
+Toot!Toot!
sound effect
“A”+Toot!Toot!
sound effect
“B”+ chugging
sound effect

7
4. Press the LETTER ‘C’ BUTTON to
hear “C” followed by a whistle sound
effect. The corresponding light will
flash with the sound.
5. Press the LIGHT-UP LETTER
BUTTONS in sequence (A-B-C) to
hear a sung melody. All the lights will
flash with the melody.
6. Press the WHISTLE BUTTON to
hear “All aboard” followed by a Toot!
Toot! sound effect or a random
melody. All the lights will flash with
the sound.
whistle sound
effect +“Dinah won’t
you blow....”
“All aboard”
+Toot!Toot!
sound effect
“C”+ whistle
sound effect
91-01402-000
VTECH
Printed in China

8
7. Roll the train to hear a chugging
sound effect followed by a sung
melody.The face will wobble andthe
beadsinthesmokestackwill pop.All
the lights will flash with the sound.
B. Melody Mode
1. SlidetheON/OFF/MODESELECTOR
SWITCH totheMELODYMODE ( )
position.Youwillhearashorttuneand
aToot!Toot!soundeffect. Allthelights
will flash with the sound.
2. Press one of theLIGHT-UPLETTER
BUTTONS toheararandommelody.
Allthelightswillflashwiththemelody.
Chugging sound
effect +“Dinah
won’t you blow....”
+Toot!Toot!
sound effect

9
3. PresstheWHISTLEBUTTONtohear
a“chugging”soundeffectfollowedby
a sung melody.All the lights will flash
with the sound.
4. Roll the train to hear a Toot! Toot!
sound effect followed by a random
melody.Theface will wobble and the
beads in the smookestack will pop.
Allthelightswillflash withthesound.
Toot! Toot! sound
effect +
chugging sound
effect +“Dinah won’t
you blow....”