V-tech On-the-Go Baby Driver Assembly Instructions

91-003294-011 US
Parent’s Guide
On-the-Go Baby DriverTM
192580.indd 1 2017/10/17 10:57:56

2
Horn Button
On/Off/Volume
Control Switch
Steering Wheel
Turn SignalIgnition Key Gear Shift
Light-Up Car Button
INTRODUCTION
Thank you for purchasing the VTech®On-the-Go Baby DriverTM.
Drive into the fun zone! This bright and colorful baby driver allows little
ones to cruise to the music as they pretend they are driving a car like
mom and dad. With realistic sounds, a fabric steering wheel, gear shift,
turn signal, ignition key, horn and mirror, the driver is sure to stimulate
your little one and promote imaginative play. The cute light-up car
button plays lots of fun and interactive car sounds. Attach the straps
to your stroller for on-the-go fun!
Baby-Safe Mirror
192580.indd 2 2017/10/17 10:57:57

3
INCLUDED IN THIS PACKAGE
• One On-the-Go Baby DriverTM
• One parent’s guide
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks, removable tags, cable ties and
packaging screws are not part of this toy, and should
be discarded for your child’s safety.
ATTENTION: Pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d’emballage tels que rubans
adhésifs, feuilles de plastique, attaches, étiquettes
et vis d’emballage. Ils ne font pas partie du jouet.
NOTE: Please keep this parent’s guide as it contains
important information.
Unlock the packaging locks
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit. Use a screwdriver
to loosen the screw.
Rotate the packaging locks 90 degrees
counterclockwise.
Pull out the packaging locks.
192580.indd 3 2017/10/17 10:57:57

4
3. Install 2 new AA (AM-3/LR6) batteries
following the diagram inside the
battery box. (The use of new batteries
is recommended for maximum
performance.)
4. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for
maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
WARNING:
With the VTech®On-the-Go Baby DriverTM safety comes first.
To ensure your child’s safety, adult assembly is required. Never
use the On-the-Go Baby DriverTM as a handle. Do not use in
moving vehicles. Do not add additional strings or straps. Possible
entanglement or strangulation injury when attached to cribs or
playpens/play yards. Do not attach to cribs or playpens/play yards.
192580.indd 4 2017/10/17 10:57:57

5
PRODUCT FEATURES
1. On/Off/Volume Control
Switch
To turn the unit ON, slide the On/
Off/Volume Control Switch to the
Low Volume ( ) or the High
Volume ( ) position. You will
hear a song, phrase and fun sound.
To turn the unit OFF, slide the On/
Off/Volume Control Switch to the OFF ( ) position.
2. Infant Stroller Attachment
To attach the On-the-Go Baby DriverTM to a stroller, locate the
two straps on the back of the toy. Position the On-the-Go Baby
DriverTM on the baby hand bar. Using the straps on the back of the
toy, fasten each side of the toy securely to the baby hand bar using
the hook and loop closures, ensuring they are securely fastened.
3. Automatic Shut Off
To preserve battery life, the On-the-Go Baby DriverTM will
automatically power down after approximately 60 seconds without
input. The unit can be turned on again by triggering any electronic
function. Spinning the steering wheel will not turn the unit back on.
NOTE: If the unit powers down while playing, we suggest changing
the batteries.
192580.indd 5 2017/10/17 10:57:57

6
ACTIVITIES
1. Spin the Steering Wheel to hear
realistic car sound effects and
imaginative phrases.
2. Press the Light-Up Car Button to
hear realistic car sound effects mixed
with playful dog barks, fun phrases,
sing-along songs and melodies.
3. Push or pull the Gear Shift to learn
about opposites through imaginative
phrases, sounds and short tunes.
4. Use the Turn Signal lever to
hear realistic car sound effects,
imaginative phrases and short tunes.
192580.indd 6 2017/10/17 10:57:58

7
5. Turn the Ignition Key to hear
realistic car sound effects and
imaginative phrases.
6. Press the Horn Button to hear a fun
squeaking sound.
7. Flip up or down the Baby-Safe
Mirror for self-discovery and to
develop an awareness of object
permanence.
SONG LIST
SONG 1
Take the wheel,
Let’s see what you can do!
SONG 2
Honk, honk,
Beep, beep,
Waving at everyone we meet.
192580.indd 7 2017/10/17 10:57:59

8
SONG 3
Turn right,
Turn left,
Driving around is the best!
SONG 4
Speed up,
Slow down,
Safety first when driving round the town.
MELODY LIST
1. The Alphabet Song
2. Animal Fair
3. BINGO
4. My Bonnie Lies Over the Ocean
5. London Bridge
6. Camptown Races
7. Row, Row, Row Your Boat
8. Pop! Goes the Weasel
9. Skip to My Lou
10. Teddy Bears’ Picnic
11. The Farmer in the Dell
12. Three Blind Mice
13. Turkey in the Straw
14. Yankee Doodle
15. Froggie Went a Courtin’
16. Glow Worm
17. Hot Cross Buns
192580.indd 8 2017/10/17 10:57:59

9
18. Old King Cole
19. Polly Put the Kettle On
20. Ring Around the Rosy
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or
malfunctions, please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit sit for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by
going to our website at vtechkids.com and filling out our Contact Us
form located under the Customer Support link. A service representative
will be happy to help you.
192580.indd 9 2017/10/17 10:57:59

10
IMPORTANT NOTE:
Creating and developing VTech®products is accompanied by a
responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department at
1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by
going to our website at vtechkids.com and filling out our Contact Us
form located under the Customer Support link with any problems
and/or suggestions that you might have. A service representative
will be happy to help you.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorientorrelocatethereceivingantenna.
• Increasetheseparationbetweentheequipmentandreceiver.
• Connecttheequipmentintoanoutletonacircuitdifferentfromthat
to which the receiver is connected.
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
192580.indd 10 2017/10/17 10:57:59