V-tech Cruise 'n Learn Driver User manual

Cruise `n Learn Driver™
© 2002 VTech
Printed in China
91-01512-003

1
Dear Parent:
At VTech®we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best of their ability. Whether it’s introducing numbers and letters,
identifying colors and shapes, or stimulating senses with lights
and music, all VTech®infant and toddler learning products
encourage your child’s natural growth and discovery skills. When
it comes to providing electronic learning products that enlighten,
entertain and develop minds, at VTech®we see the potential in
every child.
Untitled-3 8/20/02, 11:33 AM1

32
WARNING:All packing materials, such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the unit. Use a coin or
screwdriver to loosen the screw.
3. Install 2 new “AA” (UM-3/LR6)
batteriesfollowingthediagraminside
the battery box. (The use of new
alkalinebatteriesisrecommendedfor
maximum performance.)
4. Replacethebatterycoverandtighten
thescrewtosecurethebatterycover.
BATTERY NOTICE
• Install batteries correctly observing the polarity (+, -) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove batteries from the equipment when the unit will not be used
for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are
to be used.
INTRODUCTION
Thank you for purchasing the VTech®Cruise ’n Learn Driver™learning
toy! This product is one of a family of high quality electronic learning
toys. Weat VTech®arecommittedtoprovidingthebestpossibleproducts
to entertain and educate your child. Should you have any questions or
concerns, please call our Consumer Services Department at 1-800-521-
2010 in the U.S. or 1-800-267-7377 in Canada.
The VTech®Cruise ’n Learn Driver™is an interactive driver for toddlers
18monthsand up. Loaded with real car features, sound effects and lights
for make-believe fun. Turn the steering wheel to see Lucky drive back
and forth along the roadway, be sure to make frequent stops along the
way! Hop into the driver seat and take Lucky on an adventure!
INCLUDED IN THIS PACKAGE
1. One VTech®Cruise ’n Learn Driver™
2. One instruction manual
LIGHT UP TRAFFIC
LIGHTS
LIGHT UP SIGNAL
LIGHTS
LOCATION
BUTTONS
GEARSHIFT
ON/OFF/MODE
SELECTOR
HORN BUTTON
STEERING WHEEL
TURN SIGNAL
LEVER
RADIO & SEATBELT
BUTTONS
TURNING MIRROR
Untitled-3 8/20/02, 11:33 AM2-3

54
ACTIVITIES
A. Talking Mode
1. Turn the ON/OFF/MODE SELECTOR to
theTALKING MODE ( )position.You
will hear “Buckle up!” followed by a start-
up engine and a revving engine sound
effect. All the lights will flash with the
sound.
2. Turn theSTEERING WHEEL to the left or
the right. The signal light will flash in the
directionthe steering wheel is turned, and
Luckywilldrivebackandforthontheroad.
When the car stops in front of one of the
four location buttons you will hear a
barking sound effect followed by a fun
phrase related to the location. The traffic
lights will flash with the sound.
3. Turn theSTEERING WHEEL to the left or
the right for approximately ten seconds.
The yellow light will light up and you will
hear a squealing tire sound effect, then
the red light will light up and you will hear
“Red light, Stop!” The green light will light
upandyouwillhear“Greenlight,Go!”and
a revving engine sound effect.
"Red light,
stop!"
"Buckle up!"
+ engine sound
+ revving sound
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE:Ifforanyreason the program/activity stops working, pleasefollow
these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada, and a service representative will be happy to help you.
TO BEGIN PLAY
1. To turn the unit ON, turn the ON/OFF/MODE
SELECTOR to the TALKING MODE ( )
or the MUSIC MODE ( ) position.
2. To adjust the volume, slide the VOLUME
CONTROL SWITCH located on the bottom
of the unit to the ( ) position for LOW
VOLUME or the ( ) position for HIGH
VOLUME.
3. To turn the unit OFF,turnthe ON/OFF/MODE
SELECTOR to the OFF (•) position.
Untitled-3 8/20/02, 11:33 AM4-5

76
9. Press the SEATBELT BUTTON to hear
“Buckle up!” All the lights will flash with the
sound.
10. Push the GEARSHIFT up to hear a revving
engine sound effect. The green traffic light
will flash with the sound.
11. Pull the GEARSHIFT down to hear a
squealingtiresoundeffect.Theredtrafficlight
will flash with the sound.
12. MovetheTURN SIGNAL LEVER upordown
tohearatickingsound effect.The signal lights
will flash with the sound.
13. PresstheHORN BUTTON tohearacar horn
sound effect. All the lights will flash with the
sound.
14. Ifthere is no input tothe unit after approximately 15seconds, you will
hear a horn sound effect followed by a random phrase. If there is no
input after another 15 seconds you will hear another random phrase,
then the unit will automatically power-down. The unit can be turned
on again by pressing any button or by turning the steering wheel.
“Buckle up!”
4. Press the FIRE STATION BUTTON to hear
a siren sound effect or “It’s Fire Chief Joe!”
The left signal light will flash with the sound.
5. Press the GAS STATION BUTTON to hear
“Filler up!” or “We need gas!” The left signal
light will flash with the sound.
6. Press the RESTAURANT BUTTON to hear
“We’rehungry!” or “Twoburgers togoplease!”
Therightsignal light will flash with the sound.
7. Press the PARK BUTTON to hear a barking
sound effect or “Let’s go play with our friends
at the park.” The right signal light will flash
with the sound.
8. Press the RADIO BUTTON to hear a static
soundeffector a random melody.Allthelights
will flash with the sound.
"It's Fire Chief
Joe!"
“ e need
gas!”
"Two
burgers to go
please!"
"Let's go play with
our friends at the
park"
Untitled-3 8/20/02, 11:34 AM6-7

98
5. Press the SEATBELT BUTTON to hear
“Buckle up!” or a random melody. All the
lights will flash with the sound.
6. Push the GEARSHIFT up to hear a revving
engine sound effect. The green traffic light
will flash with the sound.
7. Pull the GEARSHIFT down to hear a
squealingtiresoundeffect.Theredtrafficlight
will flash with the sound.
8. MovetheTURN SIGNAL LEVER upordown
tohearatickingsound effect.The signal lights
will flash with the sound.
9. Pressthe HORN BUTTON toheara car horn
sound effect. All the lights will flash with the
sound.
“Buckle up!”
B. Music Mode
1. Turn the ON/OFF/MODE SELECTOR to
the MUSIC MODE ( ) position. You
will hear a car horn sound effect followed
by “Remember to buckle up!” and a short
tune.All the lights will flash with the sound.
2. Turn the STEERING WHEEL to the left or
the right. You will hear a random melody,
and Lucky will drive back and forth on the
road.All the lights will flash. When the car
stops in front of one of the four location
buttons, you will hear a sound effect play
overtop of the melody. All the lights will
flash with the sound.
3. PresstheFIRE STATION, GAS STATION,
RESTAURANT and PARK BUTTONS to
hearpre-programmedmelodies.The traffic
lights will flash with the sound.
4. PresstheRADIO BUTTON tohear a static
sound effect or a random melody. All the
lights will flash with the sound.
“Remember to
buckle up!” +
Untitled-3 8/20/02, 11:34 AM8-9

1110
IMPORTANT NOTE
Creating and developing toddler products is accompanied by a
responsibility that we at VTech®take very seriously. We
makeeveryeffortto ensure the accuracy of theinformation,which
forms the value of our products. However, errors sometimes
occur. It is important for you to know that we stand behind our
products and encourage you to call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada with any problems and/or suggestions that you might
have. Our service representative will be happy to help you.
NOTE:
This equipment generates and uses radio frequency energy and if not
installed and used properly, that is, in strict accordance with the
manufacturer’s instructions, it may cause interference to radio and
television reception. It has been type tested and found to comply within
the limits for a Class B computing device in accordance with the
specifications in Sub-part J of Part 15 FCC Rules, which are designed to
provide reasonable protection against such interference in a residential
installation. However, there is no guarantee that interference will not
occurinaparticularinstallation. Ifthisequipmentdoescauseinterference
withradio or television reception, which can be determinedby turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measure:
• reorient the receiving antenna
• relocate this product with respect to the receiver
• move this product away from the receiver
10. Ifthere is no input tothe unit after approximately 15seconds, you will
hear a random phrase or sound effect and a random melody. If there
is no input after another 15 seconds you will hear another random
phrase or sound effect and a random melody, then the unit will
automatically power-down. The unit can be turned on again by
pressing any button or by turning the steering wheel.
PRE-PROGRAMMED MELODIES:
1. On Top of Old Smokey
2. Toyland
3. Polly Put the Kettle On
4. Take Me Out to the Ballgame
5. Twinkle Twinkle Little Star
6. Yankee Doodle
7. Teddy Bears’ Picnic
8. Mulberry Bush
CARE AND MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit away from direct sunlight and heat source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
Untitled-3 8/20/02, 11:34 AM10-11