V-tech Switch&Go Dinos Blister the Velociraptor Assembly Instructions

Blister the Velociraptor
Parent’s Guide
91-009642-013 UK
®

2
Sound Button
INTRODUCTION
My name is Blister the Velociraptor, and I’m looking for a few
good dinos to join my squad. But let me warn you – you’ve got to be
at your best to keep up with me! I’m fast and ferocious with sharp,
curved claws that make me as tough as any dino.
I make a pretty tough helicopter too! I patrol the skies with my
searchlight shining down from above. Once I’ve got a target in my
sights, there’s nowhere for it to hide!
Rotor Blades
Button
ON/OFF Switch
Talk Button
Volume Button Searchlight Button
Launch ButtonStyle Button
LCD Screen

3
INCLUDED IN THIS PACKAGE
• One VTech®SWITCH & GO DINOS®Blister the Velociraptor
• One parent’s guide
WARNING: All packing materials such as tape, plastic sheets,
packaging locks, removable tags, cable ties and
packaging screws are not part of this toy and
should be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains
important information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the unit. Use a screwdriver to loosen
the screw.
3. Install 2 new AA (LR6/AM-3) batteries
into the main unit following the diagram
inside the battery box. (The use of new,
alkaline batteries is recommended for
maximum performance).
4. Replace the battery cover and tighten
the screw to secure.
BATTERY NOTICE
• Use new alkaline batteries or fully charged NI-MH (Nickel Metal-
hydride) rechargeable batteries for best performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.

4
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Donotdisposeofbatteriesinre.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
The chemical symbols Hg, Cd or Pb, where marked,
indicatethatthebatterycontainsmorethanthespecied
value of mercury (Hg), cadmium (Cd) or lead (Pb) set out in
Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product
or batteries responsibly.
For more information, please visit:
www.recycle-more.co.uk
www.recyclenow.com

5
PRODUCT FEATURES
1. ON/OFF SWITCH
Slide the ON/OFF Switch to ON ( ) to turn the
unit ON. Slide the ON/OFF Switch to OFF ( )
or hold the Talk Button for a few seconds to turn
the unit OFF.
2. STYLE BUTTON
Press the Style Button to select the
dino eyes you prefer in dino mode.
Press the Style Button to select the
pilot you prefer in helicopter mode.
3. TALK BUTTON
Press the Talk Button to hear the
dino or pilot talk.
4. SOUND BUTTON
Press the Sound Button to hear cool
sound effects.
5. VOLUME BUTTON
Press the Volume Button to adjust
the volume.
There are four levels available: low,
medium, high, and mute.

6
6. SEARCHLIGHT BUTTON
Press the Searchlight Button to turn
on the searchlight.
7. LAUNCH BUTTON
Press the Launch Button to launch
the rocket.
8. ROTOR BLADES BUTTON
Press the Rotor Blades Button to
spin the rotor blades.
9. MOTION SENSOR
 Movethehelicopterthroughtheairtohearfunyingsounds!
10. AUTOMATIC SHUT-OFF
To preserve battery life, the unit will automatically shut-off after
several minutes without input.

7
3. Move the launcher across.4. Fold the arms.
5. Move the tail down. 6. Flip the rotor blades to the
front of the helicopter.
2. Move the head up.1. Velociraptor mode.
HOW TO SWITCH THE BLISTER

8
10. Turn the feet up.
11. Move the wings down. 12. Helicopter mode.
9. Flip the legs up.
8. Turn the rear wing at the end
of the tail forward.
7. Spread the rotor blades.
Note: To change the helicopter back into a dino, reverse the order of
the steps above.

9
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play with again.
5. If the product still does not work, install a brand new set of batteries.
If the problem persists, please contact our Consumer Services
Department and a service representative will be happy to help you.