V-tech Go! Go! Smart Wheels Race & Play Adventure... Assembly Instructions

Parent’s Guide
Race & Play Adventure Park™
91-003375-006

2
2
2
INTRODUCTION
Thank you for purchasing the VTech®Go! Go! Smart Wheels®Race
& Play Adventure Park™! Go for a ride with Gavin the Go-Kart as he
races down the track, through the 360-degree loop and out the jump
ramp.Then, place Gavin in the catapult launcher and pull back the lever
to launch him to the top!
Ferris Wheel
Catapult
Launcher
Roller
Coaster Hill
4 SmartPoint®
Locations
SmartPoint®
Go-Kart

3
3
3
INCLUDED IN THIS PACKAGE
One roller coaster
structure
One SmartPoint®
Go-Kart
One SmartPoint®
roller coaster platform
One hill supportOne SmartPoint®
hill track
One catapult
lever
One catapult
track support
One SmartPoint®
catapult platform
One catapult arm One catapult track
One base connector
NOTE: This toy is not intended for teething.

4
4
4
One gate One jump track,
male
One gate plate
One carnival pieceOne SmartPoint®
ramp base
Ramp track A
One flag
One Ferris wheelThree Ferris wheel vehicles

5
5
5
Ramp track D
Ramp track C
Ramp track B
Slide track A Slide track B
- One parent’s guide
One label sheetTwelve screws
One ramp
track support
Slide track C One slide track support One slide sign
One end track, male
AB
C

6
6
6
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy, and should be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains important
information.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE : Il est conseillé de conserver ce guide des parents car il
comporte des informations importantes.
Adult assembly required.
This package contains small screws. For your child’s safety, do
not let your child play with the toy until it is fully assembled.
CAUTION:
Ce jouet doit être assemblé par un adulte.
Ce jouet contient des petites vis. Pour la sécurité de votre
enfant, ne pas le laisser jouer avec le jouet tant que ce dernier
n’est pas complètement assemblé par un adulte.
ATTENTION !
Unlock the packaging locks:
Turn the packaging lock counter-
clockwise several times.
Pull out and discard the packaging lock.

7
7
7
GETTING STARTED
BATTERY INSTALLATION
Go-Kart
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the Go-Kart. Use a
screwdriver to loosen the screw.
3. Install 2 new AAA (AM-4/LR03)
batteries following the diagram inside
the battery box. (The use of new
alkaline batteries is recommended
for maximum performance.)
4. Replace the battery cover and tighten
the screw to secure the battery cover.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable, or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.

AB
C
8
8
8
LABEL APPLICATION
Please adhere the labels to the playset securely as
indicated on the following pages:
6
6
5
1
91-003375-006

9
9
9

10
10
10
ASSEMBLY INSTRUCTIONS
Race & Play Adventure Park™
With the VTech®Go! Go! Smart Wheels®Race & Play Adventure
ParkTM, safety comes first. To ensure your child’s safety, adult
assembly is required.
1. With the Roller Coaster Structure right-side up, insert the
SmartPoint®Roller Coaster Platform, as shown below. You will
hear a “click” sound to indicate the ramp base is secure.
2. Next, assemble and attach the catapult components to the Roller
Coaster Structurefollowingthestepsbelow:
A:InserttheSmartPoint®Catapult Platform into the Catapult
Arm. You will hear a “click” sound to indicate the pieces are
secure.

11
11
11
B:Then, screw the Catapult Arm into the back of the Roller
Coaster Structure, as shown in the picture.
C:Next,screwtheCatapult Lever and Catapult Track Support
to the Catapult Track, as shown below.
D: Finally, attach the Base Connector to the Catapult Track
and Roller Coaster Structure as pictured. Once the Base
Connector is attached, it cannot be removed.

12
12
12
3. Insert the SmartPoint®Ramp Base into the Roller Coaster
Structure, as shown below.You will hear a “click” sound to indicate
both pieces are secure.
4. Attach the SmartPoint®Hill Track to the Hill Support. Then,
attach the SmartPoint®Hill Track to the side of the Roller Coaster
Structure and Catapult Track. You will hear a “click” sound to
indicate the pieces are secure.
5. Now, attach Slide Tracks A, B and Cto the Roller Coaster
Structurefollowingthestepsbelow:
A: Attach Slide Track A to the Roller Coaster Structure, as
shown in the picture. You will hear a “click” sound to indicate
the piece is secure.
先安装房子和常
轨道

13
13
13
B:Then,connectSlide Track B to Slide Track A in the Roller
Coaster Structure opening, as shown in the picture. You will
hear a “click” sound to indicate the pieces are secure.
C: Finally, insert the Slide Support into Slide Track C. Then,
connect Slide Track C to Slide Track B and the Catapult Base,
as shown in the picture.You will hear a “click” sound to indicate
the pieces are secure.
6. Insert the Carnival Piece into the SmartPoint®Ramp Base, as
shown below.You will hear a “click” sound to indicate the Carnival
Piece is secure.

14
14
14
7. Now, assemble Ramp Tracks A, B, C and Dfollowing the steps
below:
A:ConnectRamp Track A to the Roller Coaster Platform and
Carnival Piece, as shown in the picture. You will hear a “click”
sound to indicate Ramp Track A and the Roller Coaster
Platform are secure.
B:Then,connectRamp Track D to the SmartPoint®Ramp Base,
as shown in the picture.You will hear a “click” sound to indicate
Ramp Track D is secure.
C: Next, insert the Ramp Track Support into Ramp Track C.
Then, connect Ramp Track C to Ramp Track D, as shown in
the picture. You will hear a “click” sound to indicate the pieces
are secure.

15
15
15
D:Finally,connectRamp Track B to Ramp Tracks A and C, as
shown in the picture.You will hear a “click” sound to indicate the
pieces are secure.
8. Insert the three Ferris Wheel Vehicles into the Ferris Wheel.You
will hear a “click” sound to indicate the Ferris Wheel Vehicles are
secure. Then, screw the Ferris Wheel into the top of the Roller
Coaster Structure, as shown below.
9. Attach the Gate Plate to the Gate. Then, insert the Gate into the
jump track, as shown below.You will hear a “click” sound to indicate
the Gate is secure.

16
16
16
10. Insert the Flag into the Roller Coaster Structure and insert the
Slide Sign into Slide Track C, as shown below. You will hear a
“click” sound to indicate they are secure.
Once you’ve completed the above steps, you are ready to play! You
can connect these pieces to the other included track pieces or you can
connect this playset to other Go! Go! Smart Wheels®playsets (each
sold separately).
EXPAND & EXPLORE
Connect to the Go! Go! Smart Wheels
®
Deluxe Track Set (as
shown below) or other Go! Go! Smart Wheels
®
playsets (each sold
separately) to expand the Race & Play Adventure Park™ and inspire
creativity.

17
17
17
PRODUCT FEATURES
Go-Kart
1. ON/OFF Switch
To turn the Go-Kart ON, slide the On/Off Switch
to the ON ( ) position.To turn the Go-Kart OFF,
slide the On/Off Switch to the OFF ( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the included Go-Kart will automatically power-
down after approximately 60 seconds without input.The unit can only
be turned on again by pressing the Light-Up Button, pushing the
Go-Kart quickly or triggering a SmartPoint®location.
Note: This product is in try-me mode in the packaging. After opening the
package, turn the vehicle off and on again to proceed with normal play. If
the unit powers down while playing, we suggest changing the batteries.
ACTIVITIES
Go-Kart
1. Slide the On/Off Switch to turn the Go-Kart
ON. You will hear a song, fun phrases and
sounds. The light will flash with the sounds.
2. Press the Light-Up Button to hear fun
sounds, songs and phrases. The light will
flash with sounds.

18
18
18
3. Push the Go-Kart to hear fun sounds and
melodies.While a melody is playing, continue
pushing the Go-Kart to add in fun sounds
on top of the melody. The light will flash with
sounds.
4. For added fun, the Go-Kart interacts with the Go! Go! Smart
Wheels®Race & Play Adventure Park™. Simply put the Go-
Kart on one of the playsets four SmartPoint®locations to see
the Go-Kart’s light flash and to hear fun sounds, short tunes and
phrases. The Go-Kart even interacts with other Go! Go! Smart
Wheels®playsets (each playset sold separately).
ACTIVITIES
Race & Play Adventure Park™
1. Place the Go-Kart or any SmartPoint®
vehicle (each sold separately) on any
of the playsets four SmartPoint®
locations to trigger fun sounds, songs
or phrases.
2. Put the Go-Kart on the SmartPoint®
hill platform, and turn the handle to
make the Go-Kart climb the hill like a
real roller coaster! Once the Go-Kart
reaches the top, it will slide down to
the catapult launcher.

19
19
19
3. Pull the catapult lever and launch the
Go-Kart to the top level!
Note:Only use Go! Go! Smart
Wheels®vehicles on the catapult.
4. Watch the Go-Kart race down the
ramp, twirl around the 360° loop and
launch off the jump track.
5. Move the parachute up the carnival
piece, and watch it tumble down for
cause and effect fun.
6. Spin the Ferris wheel round and
round for added role-play fun.

20
20
20
SONGS
1. We’re here, so much to do,
Now, let’s go play just me and you.
We’ll find a ride built for two,
Oh, let’s have some fun my buddy!
2. Race, race, race some more,
Up and down the hill!
Happily, happily, happily, happily,
Ready for a thrill!
3. Dash forward,
Swerve around the corner, whee!
Up and down we go!
MELODY LIST
1. Oats, Peas, Beans and Barley Grow
2. Ring Around a Rosy
3. Yankee Doodle
4. One, Two, Buckle My Shoe
5. Sing a Song of Sixpence
6. Ta Ra Ra Boom De Ay
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2.
Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.