V-tech KidiBuzz User manual

Quick Start Guide
For additional help, please visit
www.vtechkids.com/tutorials/kidibuzz
91-003339-006(H1).indd 1 2017/6/16 14:06:27

1
Getting Started
Register your KidiBuzz™ to get:
• A one-year limited warranty1
• Additional FREE VTech®apps2
•Kid-safe chatting with KidiConnect™
• Access to Parent Settings where you can manage your child’s
apps, set time limits, and more
1. CHARGE your KidiBuzz™ using the included USB cable and
adapter. A flashing green light indicates charging is in progress.
The light will stop flashing when the device is fully charged. A full
charge takes about some hours. The battery should be fully charged
before the first use and system update.
2. SET UP the device by following the on-screen prompts to connect
to Wi-Fi, select a time zone, and create a Parent Settings passcode.
3. DOWNLOAD and install an important update to your KidiBuzz™.
4. REGISTER your KidiBuzz™ by creating a Learning Lodge®account.
5. UNLOCK KidiConnect™ at the end of registration and install the
app on your mobile device.
6. ENJOY fun learning games, silly photos, kid-safe chatting and more!
1 Please see the Warranty Sheet for details.
2 For first-time registration and designated content only.
91-003339-006(H1).indd 1 2017/6/16 14:06:27

2
Back Button
Home Button
Camera Button
Capacitive
Touch Screen
Help Button
Microphone
Rotating Camera
Talk Button
Battery Charging
Indicator Light
Key Features
Headphone Jack
Micro-USB/Charger
Port
microSD Card Slot
(microSD card not included)
Volume -/+ Buttons
Power Button
Camera Button – Press this for instant access to the camera.
Talk Button –Press this to send a quick voice message. If you want to choose
a contact first, press the button once then touch the Change Friend icon. If
you want to keep sending messages to the same person without choosing a
contact, you can hold down the button while you talk, and it will record your
voice. Let the button go to send the message.
Shortcut Buttons
91-003339-006(H1).indd 2 2017/6/16 14:06:29

3
Parent Settings
To enter Parent Settings, touch the profile icon in
the corner of your child’s Home screen. A Parents
icon will appear. Touch that icon, then input your
passcode on the pop-up screen.
With Parent Settings, you can control the way
your child plays by adding or removing content,
setting time limits, managing access to the Web,
and adjusting device settings.
Adding or Removing Content
Browse Learning Lodge®for a selection of age-
appropriate educational apps that have been
approved by VTech®learning experts. If you’re
looking for common Android apps outside of the
VTech®ecosystem, go to Device Settings and
select Get Other Apps to find instructions on how
to install a third-party app store.
You can manage any new content you add through the following
menu options:
•VTech®App Manager—Come here to download or uninstall any content
you’ve purchased from Learning Lodge®. You can also uninstall some
of the content that was included with the system.
•App Settings—If you download content from a third-party app store,
it will not appear in your child’s profile until you come here and give
them permission to use the app.
Setting Time Limits
Select Time Controls from the Parent Settings menu to limit the
amount of time your child is allowed to play per day or to mark certain
hours of the day as off limits.
Managing Web Access
The Web Browser creates a kid-safe environment by only allowing
your child to visit sites that have been pre-screened by VTech®for
their age-appropriate content. You can add additional sites to your
child’s Browser (or remove sites) by selecting Approved Sites from the
Parent Settings menu.
Adjusting Device Settings
There are several other options in Parent Settings that will allow you
to control your device’s Wi-Fi connection, edit your child’s profile
information or your Learning Lodge®account information, and
manage detailed device settings.
91-003339-006(H1).indd 3 2017/6/16 14:06:29

4
If You Forget Your Parent Settings Passcode
If you forget your Parent Settings passcode, go to the passcode
screen and enter the number 9876543210. We'll send you an email to
tell you your passcode.
Charging the Device
To charge the device, first connect the included USB cable to the KidiBuzz™
by inserting the small end of the cable into the micro-USB port on your device.
Insert the larger end of the USB cable into the USB socket of the Power
Adapter and plug the Adapter into a wall socket.
You can also charge the device by plugging the larger end of the USB
cable into a computer’s USB port.
Standard guidelines for adaptor toys and electrically operated products
• As with all electrical products, precautions should be used and
observed during handling and use to prevent electric shock.
• Donotleavethetoypluggedinforextendedperiodsoftime.
• Thetoyshallonlybeusedwithapoweradapterfortoys.
• Nevercleanaplugged-intoywithliquid.
• Neverusemorethanoneadapter.
• Theadapterisnotatoy.
• Parentsshouldperiodicallyexaminetheadapterforconditionsthatmay
result in the risk of fire, electric shock, or injury to persons. In the event of
such conditions, the adapter should not be used until properly repaired.
Specification of Power Adapter:
Output: 5V DC
WARNING: All packing materials, such as tape, plastic
sheets, packaging locks, removable tags, cable ties and
packaging screws are not part of this toy, and should be
discarded for your child's safety.
ATTENTION: Pour la sécurité de votre enfant, débarrassez-
vous de tous les produits d’emballage tels que rubans
adhésifs, feuilles de plastique, attaches, étiquettes et vis d’emballage. Ils ne
font pas partie du jouet.
Il est conseillé de conserver ce manuel d'utilisation car il comporte des
informations importantes.
Note: Please keep this Quick Start Guide as it contains important information.
USB Cable and
Power Adapter
Other Information
Micro-USB Port Micro-USB Port
91-003339-006(H1).indd 4 2017/6/16 14:06:29

5
WARNING
A very small percentage of the public, due to an existing condition, may experience
epileptic seizures or momentary loss of consciousness when viewing certain types
of flashing colors or patterns, especially on television. While the KidiBuzz™ does not
contribute to any additional risks, we do recommend that parents supervise their
children while they play video games. If your child experiences dizziness, altered
vision, disorientation, or convulsions, discontinue use immediately and consult your
physician. Please note that focusing on an LCD screen at close range for a prolonged
period of time may cause fatigue or discomfort. We recommend that children take
a 15-minute break for every hour of play.
Caution
When you are not charging the battery or connected to a computer, close the USB
port cover on the KidiBuzz™ for safety.
Use the power adapter and micro-USB cable that came with this device to charge it.
Using a different charger may damage your KidiBuzz™.
Please note: VTech®is the only service provider that is authorized to replace the
battery on your KidiBuzz™. Any attempt to remove or replace the battery by a third
party or by yourself may damage your KidiBuzz™ and will void your warranty. If you feel
your battery needs service, please contact VTech's Consumer Services Department.
OTHER NOTES:
Static electricity may cause the KidiBuzz™ to malfunction. In some cases,
the game play score stored in the device's memory may be lost. In cases
where the KidiBuzz™ is malfunctioning due to static electricity, reset the
device by pressing and holding the Power Button for 10 seconds until
the unit turns off. Then press and hold the Power Button for 3 seconds
to turn on the unit again.
This product is licensed under the AVC patent portfolio license for the
personal use of a consumer or other uses in which it does not receive
remuneration to
(i) encode video in compliance with the AVC standard (“AVC video”)
and/or
(ii) decode AVC video that was encoded by a consumer engaged in a
personal activity and/or was obtained from a video provider licensed
to provide AVC video.
No license is granted or shall be implied for any other use. Additional
information may be obtained from MPEG LA, L.L.C. See
http://www.mpegla.com
Disclaimer and Limitation of Liability
VTech®Electronics North America, L.L.C. and its suppliers assume no
responsibility for any damage or loss resulting from the use of this
handbook. VTech®Electronics North America, L.L.C. and its suppliers
91-003339-006(H1).indd 5 2017/6/16 14:06:29

6
assume no responsibility for any loss or claims by third parties that may
arise through the use of this software. VTech®Electronics North America,
L.L.C. and its suppliers assume no responsibility for any damage or loss
caused by deletion of data as a result of malfunction, dead battery, or
repairs. Be sure to make backup copies of important data on other media
to protect against data loss.
Company: VTech® Electronics North America, L.L.C.
Address: 1156 W. Shure Drive, Suite 200, Arlington Heights, IL 60004 USA
Phone : [phone] in the U.S. or 1-877-352-8697 in Canada
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•Reorientorrelocatethereceivingantenna.
•Increasetheseparationbetweentheequipmentandreceiver.
•Connecttheequipmentintoanoutletonacircuitdifferentfromthat
to which the receiver is connected.
•Consultthedealeroranexperiencedradio/TVtechnicianforhelp.
•Thebatteryisnotremovable.
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES AND INDUSTRY
CANADA LICENCE-EXEMPT RSS STANDARD(S). OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT
ANY INTERFERENCE, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION OF THE DEVICE.
LE PRÉSENT APPAREIL EST CONFORME AUX CNR D'INDUSTRIE
CANADA APPLICABLES AUX APPAREILS RADIO EXEMPTS DE LICENCE.
L'EXPLOITATION EST AUTORISÉE AUX DEUX CONDITIONS SUIVANTES:
(1) L'APPAREIL NE DOIT PAS PRODUIRE DE BROUILLAGE, ET (2)
L'UTILISATEUR DE L'APPAREIL DOIT ACCEPTER TOUT BROUILLAGE
RADIOÉLECTRIQUE SUBI, MÊME SI LE BROUILLAGE EST SUSCEPTIBLE
D'EN COMPROMETTRE LE FONCTIONNEMENT.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
A USB cable with a ferrite core must be used with this equipment to
ensure compliance with the Class B FCC limits.
91-003339-006(H1).indd 6 2017/6/16 14:06:29

7
Responsible party for FCC Part 15 Declaration of Conformity : VTech
Electronics North America, LLC. 1156 W Shure Drive, Suite 200, Arlighton
Heights, IL 60004. (847) 4003600.
END USER LICENSE AGREEMENT
THIS IS A LEGAL AGREEMENT BETWEEN YOU AND VTECH INC. (“VTECH”),
STATING THE TERMS THAT GOVERN YOUR USE OF SOFTWARE FOR
KIDIBUZZ OR IN CONNECTION WITH THE APPLICATION OF SOFTWARE
(“SOFTWARE”). “SOFTWARE” INCLUDES AUDIO FILES FOR THE KIDIBUZZ
SYSTEM.
BY ACTIVATING, USING, DOWNLOADING OR INSTALLING THIS SOFTWARE
, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
YOUR RIGHT TO USE THE SOFTWARE IS CONDITIONAL UPON YOUR
AGREEMENT TO THESE TERMS. IF YOU DETERMINE THAT YOU ARE
UNWILLING TO AGREE TO THE TERMS OF THIS LICENSE AGREEMENT, YOU
HAVE NO RIGHT TO USE THE SOFTWARE AND YOU SHOULD PROMPTLY
RETURN THE SOFTWARE TO VTECH OR DELETE IT.
IF YOU ARE UNDER THE AGE OF 18 OR ARE OTHERWISE CONSIDERED
A MINOR IN YOUR JURISDICTION, YOU SHOULD REVIEW THESE TERMS
AND CONDITIONS WITH YOUR PARENT OR GUARDIAN (COLLECTIVELY,
“PARENT”) AND MAKE SURE THAT YOUR PARENT UNDERSTANDS AND
AGREES ON YOUR BEHALF TO THESE TERMS AND CONDITIONS.
WHEREVER THIS AGREEMENT REFERS TO “YOU” OR “YOUR,” IT IS MEANT
TO INCLUDE BOTH PARENT AND CHILDREN USERS, EXCEPT WHERE A
CHILD IS NOT OF SUFFICIENT LEGAL AGE TO ENTER INTO A BINDING
CONTRACT (SUCH AS AN E-COMMERCE TRANSACTION) OR PROVIDE
ANY REQUIRED CONSENTS (SUCH AS CONSENT TO DATA COLLECTION,
PROCESSING, OR TRANSFERS), IN WHICH CASE THE PARENT OF SUCH
CHILD HEREBY ACKNOWLEDGES AND AGREES HE/SHE IS ACTING ON
THE CHILD’S BEHALF TO EFFECTUATE SUCH CONTRACTS OR CONSENTS
AND IS FULLY LIABLE FOR THE ACTIONS OR INACTIONS OF SUCH CHILD
WITH RESPECT TO THE USE OF THE SOFTWARE AND RELATED SERVICES.
1. OWNERSHIP. The Software and Documentation (including all content
contained within the Product) are owned by VTECH, or its licensors, and are
protected by international copyright and other intellectual property laws. The
Software and Documentation shall only be used by you in accordance with this
Agreement. The Software and Documentation are licensed, not sold. Except
as specifically set forth herein, VTECH and its licensors retain all right, title
and interest, including all intellectual property rights, in and to the Software
and Documentation.
2. LICENSE TERMS. VTECH grants to you, subject to the terms, conditions
and limitations further defined in this Agreement, a non-exclusive, non-
sublicenseable, non-transferable license for non-commercial use, and to
use the Documentation in connection with such use of the Software. Any
modifications, upgrades, error corrections, or other updates to the Software
provided by VTECH to you shall be deemed part of the Software and use
thereof shall be governed by the terms and conditions of this Agreement,
unless the parties have entered into a separate, written agreement governing
such modifications, upgrades, error corrections, or other updates.
91-003339-006(H1).indd 7 2017/6/16 14:06:29

8
3. RESTRICTIONS ON REVERSE ENGINEERING AND SECURITY. Except to the
extent otherwise expressly and unambiguously authorized by VTECH or to the
extent such restrictions are explicitly prohibited by applicable law, you shall
NOT reverse engineer, decompile, disassemble, translate or attempt to learn
the source code of the Software (ii) copy, modify, create derivative works of,
distribute, sell, assign, pledge, sublicense, lease, loan, rent, timeshare, deliver
or otherwise transfer the Software (iii) remove from the Software, or alter
or add, any copyright, trademarks, trade names, logos, notices or markings
(iv) violate, tamper with or circumvent any security system or measures
implemented by VTECH which are designed to prevent unauthorized copying
of the Software. Any such forbidden use shall immediately terminate your
license to the Software without any prior notice.
4. LIMITED WARRANTY. VTECH warrants to you – subject to your compliance
with the terms herein – that for a period of ninety (90) days from the date
you purchase the Product, the Software will substantially conform to VTECH’s
published specifications for the Software. Your sole and exclusive remedy
under the foregoing warranty shall be for VTECH, at its choice, to use
commercially reasonable efforts to correct any substantial non-conformity of
the Software reported to VTECH in writing within the warranty period and/or
provide a replacement copy of the Software. The foregoing warranty shall not
apply to any non-conformity that is caused by (i) the use or operation of the
Software with an application or in an environment other than that intended
or recommended by VTECH, (ii) modifications to the Software not made by
VTECH or (iii) third party hardware or software provided by any third party.
VTECH MAKES NO WARRANTIES THAT THE SOFTWARE IS ERROR FREE
OR IS SUITABLE FOR YOUR PURPOSES. VTECH MAKES NO WARRANTIES
OTHER THAN THOSE SET FORTH ABOVE, AND HEREBY DISCLAIMS ALL
OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, WITH
RESPECT TO THE SOFTWARE OR DOCUMENTATION, INCLUDING, WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. NO ORAL OR
WRITTEN INFORMATION OR ADVICE GIVEN BY VTECH, ITS RESELLERS,
AGENTS OR EMPLOYEES SHALL CREATE A WARRANTY.
5. LIMITATION OF LIABILITY. IN NO EVENT SHALL VTECH BE LIABLE
FOR ANY LOSS OF PROFITS, USE OF DATA, COST OF REPLACEMENT
GOODS OR HARDWARE, OR OTHER INDIRECT, INCIDENTAL, SPECIAL, OR
CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OR INABILITY
TO USE THE SOFTWARE DOWNLOAD OR DOCUMENTATION, EVEN IF
VTECH HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES,
AND NOTWITHSTANDING THE FAILURE OF ESSENTIAL PURPOSE OF ANY
REMEDY. YOU AGREE THAT IN NO EVENT WILL VTECH’S AGGREGATE
LIABILITY HEREUNDER OR RELATED TO YOUR USE OF THE SOFTWARE
OR DOCUMENTATION EXCEED THE AMOUNT PAID FOR THE PRODUCT
AND/OR SOFTWARE.
6. TERMINATION. This License Agreement will automatically terminate if you
fail to comply with any term thereof. No notice shall be required from VTECH
to effect such termination.
91-003339-006(H1).indd 8 2017/6/16 14:06:29

Visit our website for more
information about our products,
downloads, resources and more.
vtechkids.com
TM & © 2017 VTech Holdings Limited.
All rights reserved.
Printed in China.
91-003339-006 US
91-003339-006(H1).indd 9 2017/6/16 14:06:29