V-tech Learning Walker User manual

Learning WalkerTM
User’s Manual
© 2012 VTech
Printed in China
91-002726-000 CAUS

3
Introduction
INTRODUCTION
Thank you for purchasing the VTech®Sit-to-Stand Learning WalkerTM
learning toy.
The Sit-to-Stand Learning WalkerTM is part of the Sit-to-Stand series of
toys developed to grow with baby. Little ones can play with the stand-
alone activity panel on the oor while discovering animals, colors, music,
shapes and numbers. Attach the panel to the walker as babies grow
and they’ll continue to learn as they move along!
STURDY,
REMOVABLE
WALKER
VOLUME CONTROL
LIGHT-UP SHAPE
BUTTONS
LIGHT-UP SUN BUTTON
ATTACHED SHAPE
SORTERS
ON/OFF/MODE
SELECTOR
SWINGING
DOOR
COLORFUL
PIANO
KEYS
TELEPHONE
HANDSET
WHIMSICAL
SPINNING GEARS
ROLLERS
SPEED
CONTROL
SWITCH

4
INCLUDED IN THIS PACKAGE
• One electronic activity panel
• One main walker body
• Two legs with wheels
• One walker handle
• One telephone handset
• One user’s manual
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy, and
should be discarded for your child’s safety.
ATTENTION: Pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d’emballage tels que rubans
adhésifs, feuilles de plastique, attaches et étiquettes.
Ils ne font pas partie du jouet.
NOTE: Please keep this instruction manual as it contains important
information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of
the electronic activity panel. Use a coin
or a screwdriver to loosen the screw.
3. Install 2 new ‘AA’ (AM-3/LR6) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
Included in This Package / Getting Started

5
BATTERY NOTICE
• The use of new alkaline batteries is recommended for maximum
performance.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be charged under adult
supervision (if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Only batteries of the same or equivalent type as recommended are
to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended
number of power supplies.
• Do not dispose of batteries in re.
With the VTech®Sit-to-Stand Learning WalkerTM, safety comes
rst. To ensure your child’s safety, adult assembly is required
Please ensure that the legs, handle and activity panel are
securely locked into position to avoid injury.
The activity panel can be used alone for oor play (6+ months) or while
attached to the walker (12+ months).
Floor Play
(6+ months)
Do Re Mi Fa
So
Walker
(12+ months)
Do Re Mi Fa
So
Battery Notice

6
ASSEMBLY INSTRUCTIONS
1. Insert the legs into the slots with the wheels
facing outward, as shown in the diagram.
2. Insert the handle into the slots until they
click into place.
Attaching/Removing the Activity Panel
1. To attach the activity panel, align the bottom
of the activity panel to the bottom of the
walker, then push it back until the release
lock located above the Volume Control
Switch clicks. Please ensure the activity
panel is attached securely to the walker.
Assembly Instructions
Do Re Mi Fa So

7
2. To remove the activity panel, locate the
release lock above the Volume Control
Switch. Slide the lock up and lift the activity
panel, removing it from the walker.
PRODUCT FEATURES
1. ON/OFF/MODE SELECTOR SWITCH
To turn the unit ON, slide the ON/OFF/
MODE SELECTOR SWITCH to the
LEARNING MODE or the MUSIC MODE
position. To turn the unit OFF, slide the
ON/OFF/MODE SELECTOR SWITCH to
the OFF position.
2. VOLUME CONTROL SWITCH
Slide the VOLUME CONTROL SWITCH
to either the Low Volume or High Volume
position.
3. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Sit-to-Stand Learning WalkerTM
electronic activity panel will automatically power-down after
approximately 60 seconds without input. The unit can be turned on
again by pressing any button. Pushing the walker will not turn on
the activity panel.
Product Features

8
4. The VTech®Sit-to-Stand Learning
WalkerTM is equipped with a speed control
switch on the two back wheels of the
walker. Position one is for babies who are
just learning to take their rst steps. This
position has the most tension on the wheels
and will not allow the walker to move too
quickly. Position two is intended for the
more skillful walker. This position has less
tension on the wheels and will allow the walker to move more freely.
When adjusting the speed control switch, please make sure both
wheels are set to the same position.
ACTIVITIES
1. In Learning Mode, insert the shape sorters
or press the three shape buttons to learn
shapes and numbers.The lights will ash
with the sound.
In Music Mode, insert the shape sorters
or press the three shape buttons to hear
upbeat melodies and fun sound effects.The
lights will ash with the sound.
2. In both modes, press the light-up sun button
to hear upbeat melodies and fun sound
effects. The lights will ash with the sound.
Activities
2
1

9
3. In both modes, pick up the phone to hear
animals singing. The lights will ash with
the sound.
4. In both modes, spin the three spinning
gears to hear a fun phrase, sound effects
or a melody. The lights will ash with the
sound.
5. Open or close the swinging door to play
hide-and-seek with the ducks.
6. In Learning Mode, press the piano keys
to learn colors, animal sounds and music
notes. The lights will ash with the sound.
In Music Mode, press the piano keys to
play piano notes. When a melody is playing,
pressing the piano keys will play fun animal
sounds on top of the melody. The lights will
ash with the sound.
7. While using the activity panel with the
walker, the panel is motion-activated to
play melodies and sound effects as the
child pushes the walker.
Activities
Do
Re
Mi
Fa
So

10
MELODY LIST
1. Old MacDonald Had a Farm
2. The Glow Worm
3. Pop! Goes the Weasel
4. Oh Susanna!
5. Mary Had a Little Lamb
6. Hey Diddle Diddle
7. Turkey in the Straw
8. Polly Wolly Doodle
9. Alouette
10. Home on the Range
11. B-I-N-G-O
SUNG SONG LYRICS (Tune of “Old MacDonald Had a Farm”)
Welcome to our learning farm.
We have lots to show you.
Shapes and colors, music, too
There’s so much to do!
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
Melody List/Care & Maintenance

11
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
For information on this product’s warranty, please call VTech®at 1-800-
521-2010 in the U.S. or 1-877-352-8697 in Canada.
IMPORTANT NOTE:
Creating and developing Infant Learning® products is accompanied
by a responsibility that we at VTech® take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department at
1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.
FCC Information:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
Troubleshooting

12
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH
CANADIAN ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME
À LA NORME NMB-003 DU CANADA.
Caution: Changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Other Info