V-tech 3-in-1 Learning Zebra Scooter User manual

3-in-1 Learning Zebra ScooterTM
User’s Manual
© 2010 VTech
Printed in China
91-002487-000-000

Dear Parent,
Ever nice the look on your baby’s face when th learn something
new through their own discovery? ese self-accomplished
moments are a parent’s greatest reward. To help fulfill them,
VTech® created the Jungle Gym® series  ts.
ese unique interactive learning ts directly respond to what
children do naturally – play! Using innovative technology, these
ts react to baby’s interactions, making each play perience fun
and unique as th learn age-appropriate concepts like first words,
numbers, shapes, colors and music. More importantly, VTech®’s
Jungle Gym® ts develop baby’s mental and physical abilities by
inspiring, engaging and teaching.
At VTech®, we know that a child has the ability to do great things.
at’s why all  our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best  their ability. We thank you for trusting VTech® with the
important job  helping your child learn and grow!
Sincerely,
Your iends at VTech®
To learn more about the Jungle Gym® series and her VTech® ts, visit www.vtechkids.com

3
Introduction
INTRODUCTION
Thank you for purchasing the VTech®Jungle Gym™ 3-in-1 Learning
Zebra Scooter™!
The VTech®Jungle Gym™ 3-in-1 Learning Zebra Scooter™ converts
easily from push walker to ride-on to scooter. Kids can discover
their wild side as they move with the zebra and explore new territory
with the scooter’s walkie-talkie, compass and ashlight. The zebra’s
mane features ve light-up buttons that teach colors, animals and
destinations. The scooter also features fun horn buttons and a volume
control switch.
RECOGNITION SLOT
BUCKET
VOLUME
CONTROL
SWITCH
LIGHT-UP BUTTONS
HORN BUTTON SMILE
BUTTON
MODE
SELECTOR

4
INCLUDED IN THIS PACKAGE
One user’s manual
Included in This Package
One zebra head with
electronic parts
Two handles
One seat One zebra body and two
longer screws
Two front wheels
Three play pieces and
one bucket
One big screw
One axle, one wheel
fastener and one wheel
cover with two shorter
screws

5
WARNING: All packing materials, such as tape, plastic sheets,
wire ties and tags are not part of this toy, and should
be discarded for your child’s safety.
NOTE: Please keep this instruction manual as it contains
important information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the side of the
zebra’s head. Use a screwdriver to loosen the
screw.
3. Install2new‘AA’(AM-3/LR6)batteriesfollowing
the diagram inside the battery box. (The use
of new alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• The use of new alkaline batteries is recommended for maximum
performance.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be charged under adult
supervision (if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Only batteries of the same or equivalent type as recommended are
to be used.
• Batteries are to be inserted with the correct polarity.
Getting Started

6
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended
number of power supplies.
• Do not dispose of batteries in re.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
ASSEMBLY INSTRUCTIONS
1. To install the front wheels onto the zebra
body, rst put one wheel on the end of
the axle, then thread the axle through the
zebra body. Attach the other wheel to the
end of the axle.
2. Attach the fastener to the end wheel,
aligning the pin on the fastener with the
hole in the axle. Push the pin down into
the hole. Align the wheel cover over the
fastener, then tighten the two shorter
screws with a screwdriver.
3. To attach the left and right handles to
the zebra’s head, insert them into the
corresponding holes on the sides of the
head. You will hear a loud ‘click’ sound.
This indicates that the handles are
securely xed into the head.
Assembly Instructions
With the VTech®Jungle Gym™ 3-in-1 Learning Zebra Scooter™,
safety comes rst. To ensure your child’s safety, please only assemble
this product by an adult.

7
4. Attach the zebra’s head to the body by
snapping the head onto the body. You
will hear it click into place. Please ensure
the head is attached securely to the body.
Once the head has been attached, it
cannot be removed again.
5. Turn the zebra over to tighten the two
longer screws with a screwdriver. These
are the screws that attach the neck to the
body.
6. Insert the big screw under the seat. You
will hear a loud ‘click’ sound.
7. Insert the seat into the hinges of the neck.
You will hear a loud ‘click’ sound. This
indicates the seat is securely xed to the
neck.
Once the 3-in-1 Learning Zebra Scooter™ is assembled, it cannot
be disassembled.
Assembly Instructions

8
ATTENTION: The maximum weight for this product is 42 pounds.
It is not recommended for children older than 36
months.
1. Before riding the scooter, please make sure the handle is
securely locked in place.
2. Please wear appropriate safety gear, including a helmet and
knee pads, when riding the scooter.
3. Please ride the scooter on a smooth surface, such as a sidewalk.
Do not ride the scooter on the street, or on gravel, sand or
water.
4. Always ride the scooter during daylight. Avoid riding at night.
5. Always wear shoes when riding the scooter.
CONVERTING THE 3-IN-1 LEARNING ZEBRA SCOOTER
1. To change to ride-on mode, put down
the seat, making sure it locks into place.
Hang the bucket on the peg on the front
of the neck.
2. To change to walker mode, squeeze the
two locks under the seat to release the
seat. Pull up the seat and the support on
the scooter platform, propping the seat
with the support. You will hear a loud
‘click’ sound to indicate the seat and
support are locked into place.
Converting the 3-in-1 Learning Zebra Scooter

9
Product Features
3. To disassemble the walker mode, squeeze
the two locks under the seat, then put
down the support plate and the seat.
4. To change to scooter mode, pull the seat
up to meet the neck, and tighten the big
screw under the seat.
5. To disassemble the scooter mode, press
and hold the black button on the side of the
neck, then unscrew the big screw under
the seat.
PRODUCT FEATURES
1. MODE SELECTOR
To turn the unit ON, slide the MODE
SELECTOR to the MUSIC MODE ( ),
the FOLLOW THE LIGHTS MODE ( ),
the ANIMAL MODE ( ) or the EXPLORE
& LEARN MODE ( ) position. To turn
the unit OFF, slide the MODE SELECTOR
to the OFF ( ) position.

10
Activities
2. VOLUME CONTROL SWITCH
To adjust the volume, slide the VOLUME
CONTROL SWITCH located on the head
to LOW VOLUME ( ) or the HIGH
VOLUME ( ) position.
3. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Jungle Gym™ 3-in-1 Learning
Zebra Scooter™ will automatically power-down after approximately
45 seconds without input. The unit can be turned on again by
pressing any button.
ACTIVITIES
1. Slide the mode selector to the Music
Mode, Follow the Lights Mode, Animal
Mode or Explore & Learn Mode position
to turn the unit on. You will hear a song,
playful phrase and a short tune. The
lights will ash with the sounds.
2. Place the ashlight, compass or walkie-
talkie into the slot at the top of the zebra
head to learn objects and directions.
Upbeat short tunes and fun sounds will
accompany the play. The lights will ash
with the sounds.