V-tech Rattle & Waggle Learning Pup Assembly Instructions

91-003704-000 CAUS
Rattle & Waggle
Learning Pup
Parent’s Guide
TM

2
INTRODUCTION
Thank you for purchasing the Rattle & Waggle Learning Pup™. This
dachshund puppy moves forward and turns in circles when you shake the
dog bone. With three shape buttons on his body, this puppy introduces
colors, shapes, numbers and puppy facts. Walk along with the pup and
watch him wag his tail!
On/Off/Volume Switch
Dog Bone
Storage Hook Dog Bone Rattle
Circle
Button
Triangle
Button
Heart
Button

3
INCLUDED IN THIS PACKAGE
- One Rattle & Waggle Learning Pup™
- One dog bone rattle
- One parent’s guide
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent's guide as it contains important information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte des
informations importantes.

4
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back
of the puppy’s head. Use a screwdriver
to loosen the screw.
3. Install 4 new AA (AM-3/LR6) batteries
following the diagram inside the
battery box. (The use of new alkaline
batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable, or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.

5
PRODUCT FEATURES
1. On/Off/Volume Switch
To turn the unit On, slide the On/Off/
Volume switch to the Low Volume or
the High Volume position. You will
hear playful phrases and a fun song.
To turn the unit Off, slide the On/Off/
Volume switch to the Off position.
2. Automatic Shut Off
To preserve battery life, the Rattle & Waggle Learning Pup™will
automatically power down after approximately two minutes without
input. The unit can be turned on again by pressing any button.
NOTE: If the unit powers down during play, we suggest changing
the batteries.
ACTIVITIES
1. Circle Button
Press the Circle button to learn colors,
shapes, numbers and fun puppy facts.
The heart will ash with the sounds.
2. Triangle Button
Press the Triangle button to learn
colors and shapes and to hear playful
phrases to encourage interaction with
the puppy. The heart will ash with
the sounds.

6
3. Heart Button
Press the Heart button to learn colors
and shapes and to learn about the
heart and hear playful songs and
melodies.The heart will ash with the
sounds.
4. Dog Bone Rattle
Shake the Dog Bone Rattle to see
the puppy walk forward or in a circle.
The more you shake the rattle, the
more the puppy will move. The puppy
also responds to the rattle shaking
with cute puppy sounds and playful
phrases. If the dog bone is shaken
continuously for about 40 seconds, the
puppy will announce that he needs a
rest and will not move again for about
10 seconds. When not in use, hook the
dog bone rattle to the puppy’s collar
for easy storage.
NOTE: For best results, shake the dog bone rattle within four
feet of the puppy. The puppy moves best on hard at surfaces
and low pile carpet. For your child’s safety, do not place the
moving puppy on clothing, skin or hair. Adult supervision is
recommended.

7
SONG LYRICS
Song 1
I love to play with you, you love to play with me.
Shake my toy and I will run.
Playing is so much fun.
I love to woof-woof-woof, when playing with my best friend.
Song 2 – Long version
I wag my tail when I am having fun,
I bark when I am happy.
I run and play and giggle all day,
Then I get sleepy.
Song 2 – Short version
I run and play and giggle all day,
Then I get sleepy.
Song 3
I have short legs, but I can run.
I twist and turn and run, run, run!
MELODY LIST
1. Pop! Goes the Weasel
2. Where Has My Little Dog Gone?
3. Animal Fair
4. Did You Ever See a Lassie?
5. Diddle, Diddle Dumpling
6. Good Morning Merry Sunshine
7. Bingo
8. For He's a Jolly Good Fellow
9. Hickory, Dickory Dock
10. Humpty Dumpty

8
11. I've Been Working on the Railroad
12. Mary Had a Little Lamb
13. Jack and Jill
14. Bicycle Built for Two
15. Skip to My Lou
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on a hard surface and do not expose the unit
to excess moisture.
TROUBLESHOOTING
If for some reason the program/activity stops working, please follow
these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit back ON. The unit will now be ready to play again.
5. If the unit still does not work, replace with an entire set of
new batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, or by
going to our website at vtechkids.com and lling out our Contact Us
form located under the Customer Support link. A service representative
will be happy to help you.

9
IMPORTANT NOTE:
Creating and developing VTech®products is accompanied by a
responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information, which
forms the value of our products. However, errors sometimes
can occur. It is important for you to know that we stand behind
our products and encourage you to call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in
Canada, or by going to our website at vtechkids.com and lling
out our Contact Us form located under the Customer Support
link with any problems and/or suggestions that you might have.
A service representative will be happy to help you.
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

10
Supplier's Declaration of Conformity
Trade Name: VTech®
Model: 5227
Product name: Rattle & Waggle Learning PupTM
Responsible Party: VTech Electronics North America, LLC
Address: 1156 W. Shure Drive, Suite 200,
Arlington Heights, IL 60004
Website: vtechkids.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUSTACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)
Caution: Changes or modications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.