V-tech Lil Critters Soothe & Sound Light User manual

MANUEL
D’UTILISATION
User's Manual
© 2013 VTech
Printed in China
91-002848-000 US
Lil’ Critters Soothe &
Surprise LightTM

2
INTRODUCTION
Put your lil' critter to sleep with the Lil' Critters Soothe & Surprise Light™
by VTech®! Soothe and develop your baby's senses and encourage first
words with this combination ceiling projector and musical crib light. Soft
melodies and fun images will lull your baby to sleep, cascaded in music
and soft light!
Introduction

3
INCLUDED IN THIS PACKAGE
- One VTech®Lil' Critters Soothe & Surprise Light™
- 2 crib attachment straps
- One instruction manual
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
Please keep this instruction manual as it contains important
information.
Included in this Package
Unlock the Packaging Locks:
Rotate the packaging locks 90 degrees
counter-clockwise.
Pull out the packaging locks.

4
INSTRUCTIONS
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
back of the unit. Use a coin or a
screwdriver to loosen the screw.
3. Install 4 new ‘AA’ (AM-3/LR6)
batteries following the diagram
inside the battery box. (The
use of new alkaline batteries
is recommended for maximum
performance.)
4. Replace the battery cover and tighten the screw to secure the
battery cover.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
Instructions

5
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
PRODUCT ASSEMBLY
INSTRUCTIONS
With the VTech®Lil' Critters Soothe & Surprise LightTM safety
comefirst.Toensureyourchild'ssafety,adultassemblyisrequired.
Please follow the below instructions carefully and make sure the final
assembly is correct. Attach only to cribs with sturdy rails and spindles.
Do not attach to cribs with mesh walls.
1. Place the unit in the crib bringing both
straps over the top rail. Slide the top of the
strap under the slot on the back of the unit
and secure. Repeat this procedure with the
second strap. You can adjust the hanging
height by choosing the appropriate hole on
the top of each strap.
2. Fasten the cord on the back of the unit to the
closest spindle.
3. Pull slightly on the unit to make sure both straps
have been securely fastened. The unit should
be snug against the crib rail. Please check the
unitfrequentlytoensureitisstillsecure.
4. The unit can also be used outside of the crib as a floor toy. For
your child’s safety, please remove the crib attachment straps and
store them in a safe location.
Product Assembly Instructions

6
ACTIVITIES
1. ON/OFF/MODE SELECTOR
SWITCH
Slide the ON/OFF/MODE SELECTOR
SWITCH to select the Nature Sounds
Mode ( ), Sing-Along Song Mode
( ) or the Melody Mode ( ).
2. TIMER SWITCH
Slide the TIMER SWITCH to select
the length of time the unit will play
for. When the time is up the unit will
automatically power-down.
3. LIGHT CONTROL BUTTON
Press the LIGHT CONTROL BUTTON
to select one of four light combinations.
Press the button until you find the
desired setting.
4. VOLUME CONTROL DIAL
Turn the VOLUME CONTROL DIAL to
select the desired volume.
Activities
Minutes
10 20 30

7
5. LEAF BUTTON
Press the LEAF BUTTON to play the
next nature sound, sing-along song
or melody depending on the selected
mode.
6. PROJECTION FILM
SELECTOR SWITCH
Slide the PROJECTION FILM
SELECTOR SWITCH to change the
image that is projected on the ceiling.
7. SOUND SENSOR
The VTech®Lil' Critters Soothe & Surprise LightTMisequipped
with a special sound sensor. Once the selected time setting has
ended, the unit will automatically power-down. The sensor will
reactivate the program when it detects baby's cry for approximately
4 seconds without interruption. The unit will reactivate according
to the selected mode.
8. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Lil' Critters Soothe &
Surprise Light™ will automatically power-down after the selected
time. The unit can be turned on again by pressing the leaf button,
sliding the mode selector switch or when the sound sensor detects
baby's cry.
Activities

8
SONG LYRICS
SONG 1
The moon is out, the world is still.
It's time to get tucked in.
It’s time to rest,
Sleep tight little one,
All through the night.
SONG 2
Twinkle, Twinkle, little star,
How I wonder what you are.
SONG 3
Ring around the rosy,
A pocket full of posies.
Hush-a, hush-a,
We all fall down.
SONG 4
Row, row, row, your boat,
Gently down the stream.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
Song Lyrics/Care & Maintenance

9
TROUBLESHOOTING
If for some reason the program/activity stops working, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
For information on this product’s warranty, please call VTech®at
1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada.
IMPORTANT NOTE:
Creating and developing Infant Learning products is accompanied
by a responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department at
1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.
Troubleshooting

10
NOTE:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorientorrelocatethereceivingantenna
• Increasetheseparationbetweentheequipmentandreceiver
• Connecttheequipmentintoanoutletonacircuitdifferentfromthat
to which the receiver is connected
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp
CAUTION: Changes or modications not expressly approved by the
party responsible for compliance could void the user’s authority to
operate the equipment.