V-tech Mickey Mouse Cafe Assembly Instructions

© Disney
www.disney.com
Parent’s Guide
Mickey Mouse Café

2
INTRODUCTION
Thank you for purchasing the Toot-Toot Drivers®- Mickey Mouse
Café. Take Mickey Mouse and the Food Truck on a ride to pick
up food and make deliveries, triggering the three SmartPointTM
locations along the way. Plus, turn the chef’s hat, spin the gears,
open and close the door and windows, and move the lift up and
down for even more sensory play.
SmartPointTM Mickey Mouse
Food Truck
Lift
3SmartPointTM
Locations

3
INCLUDED IN THE PACKAGE
One rotary sign One left
castle support
One SmartPointTM
lift platform
One chef’s hat One castle roofOne SmartPointTM
Mickey Mouse Food Truck
One SmartPointTM
main track
One pickup window One takeout bag
One gate armOne left wall One castle
back support

4
One track
support
One slide track Two 90-degree
bulge tracks
One standard-
length track
Three 1/3
length bulge tracks
One SmartPointTM
castle floor
One castle One big gear One small gear
•One Parent’s Guide
One castle door One label sheetOne platform support

5
WARNING
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part
of this toy and should be discarded for your child’s safety.
Removing the Packaging Locks
GETTING STARTED
Battery Removal and Installation
Food Truck
1. Make sure the unit is turned Off.
2. Find the battery cover located on
the bottom of the unit, use a coin or
screwdriver to loosen the screw and
then open the battery cover.
3. Remove old batteries by pulling up
on one end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries following the diagram
inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended).
5. Replace the battery cover and tighten the screw to secure.
Pull out the packaging locks and discard.
Turn the packaging locks anticlockwise
several times.

6
IMPORTANT: BATTERY INFORMATION
• Insertbatterieswiththecorrectpolarity(+and-).
• Donotmixoldandnewbatteries.
• Donotmixalkaline,standard(carbon-zinc)orrechargeable
batteries.
• Onlybatteriesofthesameorequivalenttypeas
recommended are to be used.
• Donotshort-circuitthesupplyterminals.
• Removebatteriesduringlongperiodsofnon-use.
• Removeexhaustedbatteriesfromthetoy.
• Disposeofbatteriessafely.Donotdisposeofbatteriesinfire.
RECHARGEABLE BATTERIES
• Removerechargeablebatteriesfromthetoybeforecharging.
• Rechargeablebatteriesareonlytobechargedunderadult
supervision.
• Donotchargenon-rechargeablebatteries.
VTech®cares for the planet.
Care for the environment and give your toy a second life by
disposing of it at a small electricals collection point so all its
materials can be recycled.
In Australia & New Zealand:
Check with your local council for kerbside collections.
WARNING:
Adultassemblyrequiredforbatteryinstallation.
Keep batteries out of reach of children.

7
LABEL APPLICATION
Please securely stick the labels to the play set as indicated
below:
1
2
3
4
6
7
8
9
10
5
11 12
13

8
4
3
5 6
2
1
7 8
9
12 13
11
10

9
ASSEMBLY INSTRUCTIONS
Mickey Mouse Café
1. Attach the Castle Door onto the front wall of the Castle. Then,
attach both the Big Gear and the Small Gear onto the right side
of the front wall. A click sound will indicate the pieces are secure.
2. Attach the SmartPointTM Main Track into the slots on the front
side of the Castle Back Support. A click sound will indicate the
pieces are secure.
3. Set the Castle Back Support on its side. Insert the Left Wall into
the slot on the left side of the Castle Back Support, beneath the
SmartPointTM Main Track.
With the Toot-Toot Drivers®-Mickey Mouse Café, safety comes first.
Toensureyourchild’ssafety,adultassemblyisrequired.

10
4. Turn the structure upright again and attach the Track Support
beneath the right side of the SmartPointTM Main Track.
5. Connect the pegs on the Left Wall and the SmartPointTM Main
Track to the slots on the back of the Castle.
6. Connect the SmartPointTM Castle Floor under the structure.
7. Attach the Platform Support to the Left Wall.