V-tech Toot-Toot Drivers Train Set User manual

User’s Manual
Train Station
© 2013 VTech
Printed in China
91-002858-006 UK

2
INTRODUCTION
Thank you for purchasing the VTech®Toot-Toot Drivers®Train Station
learning toy!
The Toot-Toot Drivers®Train Station from VTech®lets your child play
like a real conductor! Spark your child’s imagination as they combine 32
track pieces into different congurations. Watch the motorised train and
it’s cargo car chug along the tracks and go into the station, under the
bridge and through the tunnel. The train and other Toot-Toot Drivers®
vehicles (SmartPoint™ vehicles only. each sold separately) respond
to the 10 SmartPoint™ locations that introduce early language skills.
All Aboard!
Introduction
Piano Keys
Flashing
Clock
Motorised Train
SmartPoint vehicle
location areas
3 play pieces
Connect tracks to other
Toot-Toot Drivers play sets
(each sold separately)
Warehouse Incline with hand-crank
conveyer belt

3
INCLUDED IN THIS PACKAGE
• One VTech®Toot-Toot Drivers®Train
• One VTech®Toot-Toot Drivers®electronic station
• One incline
• One warehouse
• 2 SmartPointTM tracks with trafc light
• One SmartPointTM track with road sign
• Two bridge supports
• 4 convex curved tracks
Included In This Package

4
• 3 concave curved tracks
• 4 crossroad tracks
• 8 short tracks
• 5 straight tracks
• 2 straight SmartPointTM tracks
• One SmartPointTM track for the warehouse
• One SmartPointTM track for the tunnel
• One spiral track
• One circle sign
• One destination board
• One road block
• One block for the warehouse
• One curve block for closing tracks
• One gate railing with base for station
• One trafc light
• One User’s Manual
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy, and
should be discarded for your child’s safety.
NOTE: Please keep user’s manual as it contains important
information.
Included In This Package

5
Assembly Instructions
Rotate the packaging lock
90 degrees anti-clockwise
Pull out the packaging lock
Unlock the packaging locks:
ASSEMBLY INSTRUCTIONS
With the VTech®Toot-Toot Drivers®Train Station, safety comes
rst. To ensure your child’s safety, adult assembly is required.
Electronic station
1. Attach the gate railing base to
the SmartpointTM track of the
electronic Station. Once securely
in place, you will hear a loud
‘click’ sound.
2. Place the trafc light on the gate
railing.
Tunnel
1. Lift up the incline, attach it with the SmartpointTM
track of the tunnel, you will hear a loud ‘click’
sound to indicate the track is securely connected
to the incline.

6
Warehouse
1. Lift up the warehouse, attach
it with the SmartpointTM track
of the warehouse, you will
hear a loud ‘click’ sound to
indicate the track is securely
connected to the warehouse.
After the above steps, connect these pieces to the included track pieces.
You can congure them into different shapes.
GETTING STARTED
BATTERY INSTALLATION - TRAIN
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the
unit. Use a screwdriver to loosen the screw.
3. Install 3 new AAA (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
Getting Started

7
BATTERY INSTALLATION – STATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the
station. Use a coin or a screwdriver to loosen
the screw.
3. Install 2 new AAA (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in re.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Getting Started

8
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate
that the battery contains more than the specied value of
mercury (Hg), cadmium (Cd) or lead (Pb) set out in Battery
Directive (2006/66/EC).
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product or
batteries responsibly.
For more information, please visit:
www.recycle-more.co.uk
www.recyclenow.com
PRODUCT FEATURES - Train
1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF SWITCH
to the ON position. To turn the unit OFF, slide
the ON/OFF SWITCH to the OFF position.
2. MOTOR CONTROL BUTTON
Press down the funnel button to activate the
motor, press the button again to make it release
and stop the motor.
3. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Toot-Toot Drivers®Train will
automatically power-down after approximately 30 seconds without
input when the motor is off. The unit can only be turned on again
by pressing the light-up screen button or pushing the train quickly.
Product Features

9
ACTIVITIES - TRAIN
1. Slide the ON/OFF SWITCH to the ON position
to turn the unit ON. You will hear train sounds,
a song and a phrase. The light will ash with
the sounds.
2. Press down the MOTOR CONTROL BUTTON
to start the motor. The train will move forward
automatically and you will hear train sounds.
The light will ash with the sounds.
3. Press the LIGHT-UP BUTTON to hear train
sounds, songs and phrases. Press and hold
the LIGHT-UP BUTTON to stop the motor. The
motor will restart after the button is released.
The light will ash with the sounds.
4. When the motor is off, push the train over the 10 SmartPointsTM
included in the play set to hear greetings, fun sounds, short tunes and
sing-along songs. The light will ash with the sounds. The train also
interacts with SmartPointsTM on other VTech®Toot-Toot Drivers®
play sets (each play set sold separately). Push the Train when there
is no response to hear a random melody, push it 4 times to jam train
sounds in to the melody. The light will ash with the sounds.
5. When the motor control button is pressed down, let the train run
through the SmartPoints of different themes on the tracks to hear
greetings, fun sounds, short tunes, and sing-along songs.
6. When the motor is off, if there is no input after approximately 8
seconds, you will hear an invitation and a sound effect. After another
8 seconds of no input, a song will play. If there is no input for a further
8 seconds, the unit will play a short tune and then go into sleep
mode. When the motor is running, you’ll hear all of the above, then
the train will enter sleep mode after 5 minutes of no input. The train
can be re-activated by pressing the light-up button, pressing down
the motor control button or pushing the train quickly.
Activities