V-tech Sleepy Owl Nightlight Assembly Instructions

Parent’s Guide
91-003346-001 UK
Sleepy Owl Nightlight

3
INTRODUCTION
Thank you for purchasing the Sleepy Owl Nightlight by VTech®!
This adorable, sleepy-eyed owl projects a calming rotating image onto
the ceiling to lull your little one to sleep. Choose between two sound
modes to play sing-along songs, calming melodies or soothing noise.
The delightful 3D nature scene inside the owl’s tummy moves and is
illuminated, bringing the scene to life.
On/Off/Mode
Selector Switch
Light Control
Button
Volume
Buttons
Motor Control
Button
Music
Button
Sound Sensor
Switch
Timer Switch
Volume
Buttons
Play/Pause
Button
Rotatable
Receiver
Remote
Control

4
INCLUDED IN THIS PACKAGE
•One Sleepy Owl Nightlight
•One remote control
• Two adjustable cot straps
• One parent’s guide
WARNING: All packing materials, such as tape, plastic
sheets, packaging locks, removable tags, cable
ties and packaging screws are not part of this toy,
and should be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains
important information.
Turn the packaging locks anticlockwise
several times.
Pull out and discard the packaging locks.
Unlock the packaging locks:

5
GETTING STARTED
BATTERY INSTALLATION
Sleepy Owl Nightlight
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the
unit. Use a screwdriver to loosen the screw.
3. Install 4 new AA (LR6/AM-3) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance).
4. Replace the battery cover and tighten the
screw to secure.
Remote Control
1. Locate the battery cover on the back of the
Remote Control. Use a screwdriver to
loosen the screw.
2. Install 2 new AAA (LR03/AM-4) batteries
following the diagram inside the battery box.
3. Replace the battery cover and tighten the
screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.

6
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates
they must not be disposed of in domestic waste as
they contain substances that can be damaging to the
environment and human health.
The chemical symbols Hg, Cd or Pb, where marked,
indicate that the battery contains more than the specified
value of mercury (Hg), cadmium (Cd) or lead (Pb) set
out in Battery Directive (2006/66/EC).
The solid bar indicates that the product was placed on
the market after 13th August, 2005.
Help protect the environment by disposing of your product
or batteries responsibly.
For more information, please visit:
www.recycle-more.co.uk
www.recyclenow.com
ASSEMBLY INSTRUCTIONS
With the VTech®Sleepy Owl Nightlight, safety comes first.
To ensure your child’s safety, adult assembly is required.
1. Slip one strap under a slot on the back of the unit. Then slip the
other strap under the other slot.

7
2. Place the unit against the bed rail bringing
both straps over the top rail. Slip the top
of the strap under the slot on the back
of the unit and secure by choosing the
appropriate hole. Repeat this procedure
for the second strap.
3. Fasten the cord on the back of the unit
to the bed rail.
4. Pull slightly on the unit to make sure both straps have been securely
fastened.The unit should be tight against the bed rail. Please check
the unit frequently to ensure it is still secure.
5. The Sleepy Owl Nightlight can also be placed on a night stand,
dresser or table.
NOTE:
Please check the unit frequently to ensure it is still secure. We
recommend removing the Sleepy Owl Nightlight from the cot once your
baby begins sitting or pushing up on all fours. At this time we suggest
placing the Sleepy Owl Nightlight on a night stand, dresser or table.
When removing the VTech® Sleepy Owl Nightlight from the cot,
please detach the cot attachment straps from the unit, and keep the
straps out of your child’s reach.

8
PRODUCT FEATURES
1. On/Off/Mode Selector Switch
To turn the unit ON slide the On/Off/
Mode Selector Switch to select either
Lullaby Mode or Sound Mode. Yo u
will hear sing-along songs and soothing
melodies in Lullaby Mode and soothing
sounds in Sound Mode. If a light mode
is selected, the Sleepy Owl Nightlight
will light up and the lights will twinkle to
the music while the 3D image on the
owl’s tummy rotates.
2. Timer Switch
Slide the Timer Switch to select the
desired preset time. Once the timer
has expired, the unit will enter sleep
mode. Timer options include 10, 20 or
30 minutes.
3. Light Control Button
Press the Light Control Button
to select one of four light modes.
4. Motor Control Button
Press the Motor Control Button to
select one of three motor modes. Press
to open or close the owl’s eyes and
to activate or deactivate the rotating
background.

9
5. Music Button
In each mode, press the Music Button
to play the next sound, melody or
sing-along song depending on the
selected mode.
6. Sound Sensor Switch
Slide the Sound Sensor Switch ON or
OFF.When the Sound Sensor is turned
ON, it will activate the Sleepy Owl
Nightlight to play soothing sounds or
music when your baby cries.The sound
sensor will only wake up the unit when
the Sound Sensor Switch is ON. Once
the selected time has expired, the unit
will automatically power down.
7. Volume Buttons
Press the + Button to increase the
volume or the –Button to decrease
the volume.
NOTE:
The unit’s default volume level is level three when you first open the unit
or when the batteries are changed. Once you have selected a volume
level for your unit other than level one, the unit will remember that
volume level each time you use the unit. If you have selected volume
level one (silent mode) as your volume level, the unit will automatically
default to volume level two once the unit has gone into sleep mode
and is reactivated.

10
8. Remote Control
The Remote Control can start, pause
and control the volume up to 30 feet
away from the unit so not to disturb your
baby. Be sure there are no obstructions
directly between the Remote Control
and the Rotatable Receiver. The
Remote Control is disabled after 45
minutes without input.
NOTE:
Bright sunlight or artificial light may reduce the Sleepy Owl Nightlight’s
sensitivity to the Remote Control.. To increase the reliability, reduce
ambient light near the Sleepy Owl Nightlight.
9. Rotatable Receiver
The Sleepy Owl Nightlight features
aRotatable Receiver which can be
rotated to receive an optimal signal from
the Remote Control.
NOTE:
The Rotatable Receiver can be rotated 180 degrees clockwise and
90 degrees anticlockwise from original setting.
10. Reactivating the Unit
The unit can be reactivated by pressing any button on the unit
(not including the Sound Sensor Switch), by using the Remote
Control (if used within 45 minutes of going into sleep mode) or
when the sound sensor is activated by your baby’s cry.
NOTE:
This product is in try-me mode in the packaging. After opening the
package, please remove the demo tag, then turn the unit off and on
again to proceed with normal play. If the unit repeatedly powers down,
we suggest changing the batteries.

11
ACTIVITIES
1. Lullaby Mode
Select Lullaby Mode to listen to the
sing-along songs and soothing melodies.
2. Sound Mode
Select Sound Mode to listen to a
selection of soothing sounds.
3. Play/Pause Button on the
Remote Control
Press the Play/Pause Button on the
Remote Control to pause the sounds.
Press it again to restart the sounds. If
the unit is reactivated within 5 minutes
the sing-along song, melody or soothing
sounds will continue, but if the unit is
paused for more than 5 minutes when
reactivated, the next response will play.
4. Volume Buttons on the
Remote Control
Press the + Button to increase the
volume or the – Button to decrease the
volume.
NOTE:
Point the Remote Control directly at the front of the Rotatable
Receiver and within 30 feet of the unit for an optimal signal.

12
MELODY LIST:
1. Au Clair de la Lune
2. Are you Sleeping?
3. Alouette
4. Adagio
5. All Through the Night
6. BINGO
7. Brahms’ Lullaby
8. Blue Danube Waltz
9. Clementine
10. Concerto in C Major, 1st Movement
11. Canon in D
12. Cradle Song
13. Casse-Noisette Ouverature
14. Berceuse
15. Dance of the Sugar Plum Fairy
16. Did You Ever See a Lassie?
17. Clair de Lune
18. Greensleeves
19. Eine kleine Nachtmusik
20. Four Seasons - Spring, 1st movement
21. Four Seasons - Spring, 3rd movement
22. Four Seasons - Autumn, 1st movement
23. Four Seasons - Autumn, 3rd movement
24. Four Seasons - Winter, 2nd movement
25. Für Elise
26. Glow Worm
27. Hey Diddle Diddle
28. Roses are Red
29. Hush Little Baby
30. Happy Farmer
31. Little Robin Redbreast
32. Klipp-Klapp Galopp
33. Kinderscene Op.15
34. Listen to the Mockingbird

13
35. Little Bo Peep
36. Little Miss Muffet
37. Little Boy Blue
38. London Bridge
39. Piano Sonata in C, K. 545, 1st Movement
40. L’Empereur
SONG 1
(Tune of “Hush, Little Baby”)
Hush little baby, it’s time to dream.
In the morning the sun will beam.
SONG 2
(Tune of “Rock-a-Bye Baby”)
Rock-a-bye baby, it’s time to sleep.
Eyes shut tight ’til morning light.
Baby is sleepy, cosy and calm.
Now sleep tight little baby, I’ll see you at dawn.
SONG 3
(Tune of “Lavender’s Blue”)
When nightfall comes dilly dilly,
I sing for you.
I’ll sing so softly dilly dilly,
Rest your sweet head.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.

14
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please
follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, install a new set of batteries.
If the problem persists, please call our Consumer Services Department
on 01235 546810 (from UK) or [phone] (outside UK) and a
service representative will be happy to help you.
IMPORTANT NOTE:
Creating and developing VTech®products is accompanied by a
responsibility that we at VTech®take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department on
01235 546810 (from UK) or [phone] (outside UK), with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.

TM & © 2017 VTech Holdings Limited.
All rights reserved.
Printed in China.
Visit our website for more
information about our products,
downloads, resources and more.
www.vtech.co.uk
91-003346-001 UK