V-tech Toot-Toot DriversCar Carrier User manual

© 2012 VTech
Printed in China
91-002764-001 UK
User's Manual

2
INTRODUCTION
Thank you for purchasing the VTech®Toot-Toot Drivers Car Carrier
learning toy!
The Toot-Toot Drivers Car Carrier is a big truck with big style! This
car carrier comes with one vehicle and can hold up to six Toot-Toot
Drivers vehicles (sold separately). With its drop-down ramp and back
gate, your child will love loading up the car carrier as they pretend
and play. For added interaction, this truck recognises all Toot-Toot
Drivers vehicles and has three shape buttons and a number pad that
introduce numbers and colours!
Introduction
RECOGNISES ALL
TOOT-TOOT DRIVERS
VEHICLES
FLIP-DOWN
GATE
SPINNING GEARS
TO LOWER RAMP
TRUCK
ROLE-PLAY
BUTTONS
ON/OFF/VOLUME
CONTROL SWITCH
WINDSCREEN

3
INCLUDED IN THIS PACKAGE
- One VTech®Toot-Toot Drivers Car Carrier
- One user's manual
- One truck
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
NOTE:
Please keep user's manual as it contains important
information.
Please cut and discard the plastic tie between
the ramp and the top platform before playing
with the unit. This plastic tie is not part of the
product and should be discarded for your
child’s safety.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom
of the car carrier. Use a coin or a
screwdriver to loosen the screw.
3. Install 2 new ‘AA’ (AM-3/LR6) batteries
following the diagram inside the main unit
battery box(a). Install 1 new ‘AA’ (AM-3/
LR6) battery following the diagram inside
the truck battery box(b). (The use of new
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
Getting Started
-
+
-
+

4
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinre.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging(if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate
thatthebatterycontainsmorethanthespeciedvalueof
mercury (Hg), cadmium (Cd) or lead (Pb) set out in Battery
Directive (2006/66/EC).
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product
or batteries responsibly.
Formoreinformation,pleasevisit:
www.recycle-more.co.uk
www.recyclenow.com
Product Features

5
PRODUCT FEATURES
1. ON/OFF/VOLUME CONTROL
SWITCH
To turn the unit ON, slide the ON/OFF/
VOLUME CONTROL SWITCH to the LOW
VOLUME ( ) or the HIGH VOLUME (
) position. To turn the unit OFF, slide the
ON/OFF/VOLUME CONTROL SWITCH to
the OFF ( ) position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Toot-
Toot Driver Car Carrier will automatically
power-down after approximately 30 seconds
without input. The unit can be turned on
again by pressing any button.
ACTIVITIES
1. Slide the ON/Off/Volume Control Switch
to turn on the unit. You will hear a sing-
along song, a phrase and a sound effect.
The lights will flash with the sounds.
2. Press the Button on the roof of the car
carrier to hear sounds, a phrase, a short
tune, fun music and a sing-along song. The
lights will flash with the sounds.
Activities

6
3. Press the Number Buttons and you will
hear phone sounds, numbers, colours,
phrases, fun sounds and short tunes. The
light on the phone screen will flash with the
sounds.
4. Press the three Shape/Tool Buttons to
learn shapes and phrases about using the
toolstoxthecarcarrier.Thelightonthe
phone screen will flash with the sounds.
5. Drop down/push up the Ramp to hear
sounds and phrases. The lights will flash
with the sounds.
6. Turn the Gears to hear fun sounds and see
the ramp drop down. The lights will flash with
the sounds.
7. While a vehicle is on the recognition sensor,
press down or quickly push the vehicle
through the gate to hear a greeting. The
lights will flash with the sounds.
Activities

7
8. If a melody is playing, push the car carrier
to hear fun sounds. If no other response
is playing, push the car carrier to hear fun
sounds and music.
9. After a vehicle has been recognised and
the car carrier sits idle for approximately
8 seconds, you will hear a reminder to
ndthatvehicle.Ifnovehiclehaspassed
through the recognition sensor and the unit
sits idle for approximately 8 seconds, you
will hear sound effects and a sing-along
song. If there is still no input for another 8
seconds, you will hear a closing short tune,
and the unit will go into sleep mode. The unit
can be re-activated by pressing any button
except the recognition sensor.
MELODY LIST
1. I've Been Working on the Railroad
2. London Bridge
3. Three Blind Mice
4. It's Raining, It's Pouring
5. Humpty Dumpty
6. Old King Cole
SUNG SONG LYRICS
Carry vehicles around the town.
Load them up, then roll them down.
Driving, learning along the way.
Learning's so much fun today!
Care & Maintenance / Troubleshooting

8
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
pleasefollowthesesteps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire new set of
batteries.
If the problem persists, please call our Consumer Services Department
on 01235 546810 (from UK) or+44 1235 546810 (outside UK) and a
service representative will be happy to help you.
IMPORTANT NOTE:
Creating and developing VTech®products is accompanied by a
responsibility that we take very seriously. We make every effort to
ensure the accuracy of the information, which forms the value of
our products. However, errors sometimes can occur. It is important
for you to know that we stand behind our products and encourage
you to call our Consumer Services Department on 01235 546810
(from UK) or [phone] (outside UK), with any problems
and/or suggestions that you might have. A service representative
will be happy to help you.
Other info

9
Other info