V-tech Switch & Go DInos Mega T-Rex User manual

User’s Manual
© 2013 VTech
Printed in China
91-009654-009 UK

Introduction
2
INTRODUCTION
I am Mega T-Rex and my power is yours to command! Tell me to
“go”, and I’ll make the earth shake with my powerful legs! Or tell me
to “eat”, and my spike-like teeth and super-strong jaws will leave
nothing behind!
Turn me into a building crane for even more excitement! Hear me rev
my engine and blast my horn! Or fire my drill for some demolition fun!
There’s so much we can do together. Just say the word!
Launch Button
Command
Mode Button
Style Button
Talk Button
Sound Button
Volume Button
LCD Screen
Tail Button
ON/OFF
Switch
Crane Button

INCLUDED IN THIS PACKAGE
• One VTech®Switch & Dinos®Mega T-Rex
• OneSwitch & Dinos®poster
• Oneuser’smanual
WARNING:
All packing materials, such as tape, plastic sheets, packaging locks
and tags are not part of this toy, and should be discarded for your
child’s safety.
NOTE:
Please keep the user’s manual as it contains important information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit.
3. Install 4 new AA (LR6/AM-3) batteries
into the main unit following the diagram
inside the battery box. (The use of new,
alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity. 3
Getting Started

• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinre.
• Donotchargenon-rechargeablebatteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate
that the battery contains more than the specied value of
mercury (Hg), cadmium (Cd) or lead (Pb) set out in Battery
Directive (2006/66/EC).
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product or
batteries responsibly.
Formoreinformation,pleasevisit:
www.recycle-more.co.uk
www.recyclenow.com
4
Battery Notice

PRODUCT FEATURES
1. TURNING THE UNIT ON
Slide the ON/OFF Switch to ON to turn the unit ON.
2. Style BUTTON
Press the Style Button to choose a driver or change the dino eyes.
3. TALK BUTTON
Press the Talk Button to hear the dino or driver talk.
4. SOUND BUTTON
Press the Sound Button to hear great sound effects.
5. VOLUME BUTTON
Press the Volume Button to adjust the volume.
6. LAUNCH BUTTON
Press the Launch Button to fire the drill.
7. TAIL BUTTON
Press the Tail Button to turn on the truck’s
headlights or make the dino roar. The
T-Rex will also roar if you lift his tail.
8. CRANE BUTTON
To adjust the crane’s height, hold down the Crane Button and
move the crane up to one of three positions. Release the button
to lock the crane in place.
5
Product Features

6
How to Use Voice Commands
9. COMMAND MODE BUTTON
Press the Command Mode Button to enter Command Mode
and Mega T-Rex will teach you how to command him. For more
details about Command Mode, please see the How to Use Voice
Commands section.
10. TURNING THE UNIT OFF/ AUTOMATIC SHUT-OFF
Slide the ON/OFF switch to OFF or hold the Talk Button for a few
seconds to turn the unit OFF.
To preserve battery life, the unit will automatically power-off after
several minutes without input.
HOW TO USE VOICE COMMANDS
Mega T-Rex responds to 12 different commands in each mode.
Before you can give a command, you have to get his attention. Say
“Hello T-Rex” if he’s a dino, or “Hello Truck Driver” if he’s a truck. Wait
for him to respond, then say one of the commands. If he hears you, he’ll
follow your command. But if he says “Let’s try again later”, he didn’t
hear you and you should try saying the command again.
COMMAND MODE
If you don’t have the Command List with you and you don’t know the
commands, you can press the Command Mode button to have Mega
T-Rex give you a reminder.
In Command Mode, he will tell you what command to say. Just repeat
the command after him. You don’t have to say “Hello T-Rex” or “Hello
Truck Driver” first.
If you want to choose a different command, press the Command Mode
button again. Keep pressing the button until Mega T-Rex tells you the
command you’re looking for.

How to Switch
COMMAND LIST:
DINO MODE TRUCK MODE
Command 1 Go forward! Go forward!
Command 2 Go back! Go back!
Command 3 Roar with me! Start your engine!
Command 4 Fire the drill! Fire the drill!
Command 5 Change your voice! Turn on the lights!
Command 6 Go wild! Let's make some noise!
Command 7 Snack time! Let’s race!
Command 8 Make me laugh! Sound the alarm!
Command 9 Talk to me! Talk to me!
Command 10 Teach me something! Wrecking machine!
Command 11 Go to sleep! Monster truck!
Command 12 You’re not so tough! It’s finishing time!
HOW TO SWITCH THE TRUCK TO A DINO
7
2. Move the crane back.1. Truck shape.

How to Switch
3. Separate the grill on the front of the
truck.
4. Turn Mega T-Rex over onto his
sideandiphislegback.Make
sure it locks into place.
6. Slide the grey cover on the leg
forward as far as it will go. Then
push the cover up until it locks into
place.
5. With Mega T-Rex still resting on his
side, turn his foot and his big toe up
towards the front and turn his heel
up towards the back.
1
2
8. Dino shape.
7. Turn Mega T-Rex over onto his
other side and repeat steps 4, 5,
and 6 with the other leg. Stand
MegaT-Rexupwhenyou’redone.
Move his arms down. 8

Tips to Improve the Dino’s Walking Motion
9
Note: To change the dino back into a truck, reverse the order of the
steps above.
Before you can transform the dino’s legs, you
have to unlock them. Pull back the release
switch behind each leg to unlock it. The leg
can then move forward.
TIPS TO IMPROVE THE DINO’S WALKING MOTION
Mega T-Rex’s legs will move up and down as he walks along the
ground. In order to keep the legs moving smoothly, please make sure
that the grey cover on the outside of each leg is in the proper position.
When Mega T-Rex turns into a dino, slide the cover forward
first. Then slide it up until it locks in place in the top position.
(See step 6 in the How to Switch section.)
When you turn Mega T-Rex into a truck, slide the cover
down to unlock it. Then slide it back into the bottom position.
NOTE: If the leg cover is not fixed in either the top or bottom position,
Mega T-Rex might not be able to move forward or backward in
response to voice commands in Dino Mode. If this happens, please
adjust the cover before trying the command again.
For best results, place Mega T-Rex on a hard surface.
If the rope has been cut off and drawn out of the unit, please follow
the steps below to fix it into the right place.
1. Tie a small knot at one end of
the string.
2. Feed the knot through the
hole on the crane wheel.