V-tech Switch & Go Dinos - Quiver the Stygimoloch User manual

QUIVER THE STYGIMOLOCH
QUIVER THE STYGIMOLOCH
User’s Manual
91-002678-011 US
TM
TM
© 2013 VTech
Printed in China

Hi Friend,
You’re about to embark on a “dino-mite” adventure with
me, Quiver the Stygimoloch™! Just so you know, I’ve
been specially created just for you and am part of the
VTech®Switch & Go Dinos™ crew! Switch & Go Dinos™
are a special breed of dinosaurs that transform from vehicle
to dino in a few easy steps. You’re going to love playing
with me!
Not only can you help me do some wicked transformations,
but you can help me do other cool things, too! Try pushing
me on the ground or pressing a button and you’ll hear me
make awesome sounds! Press another button to hear me
talk, and I’ll tell you all about my wild life as a dinosaur!
Maybe you’ll even learn a thing or two.
For more fun, be sure to check out the rest of the Switch &
Go Dinos™ crew (each sold separately)! And remember,
with me you’re in for some dino switchin’, road racing fun!
Your pal,
Quiver the Stygimoloch™

2
INTRODUCTION
Look out! This is Quiver the StygimolochTM, and I’m a walking
battering ram! I’ve got a hard head with spiky horns, and it’s strong
enough to knock any dino out!
When I’m not crashin’, I’m dashin’. I can turn into a cool race car that
drives super fast. Zoooom! You better keep your eyes open, cause if
you blink you might miss me!
Introduction
Sound Button
Light-up
Eyes
Talk
Button
On/Off Switch & Volume Control

3
INCLUDED IN THIS PACKAGE
• OneVTech®SWITCH & GO DINOSTM:Quiver the StygimolochTM
• Oneuser’smanual
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE:
Please keep the user’s manual as it contains important information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of
the unit.
3. Install 1 new “AA” (LR6/AM-3) battery
following the diagram inside the
battery box. (The use of new, alkaline
batteries is recommended for maximum
performance.)
4. Replace the battery cover to secure it.
NOTE:
When the battery runs low, the toy will no longer respond. If this
happens, please replace the battery.
Getting Started

4
Battery Notice
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinre.
• Donotchargenon-rechargeablebatteries.
• Removerechargeable batteries fromthe toy beforecharging (if
removable).
• Rechargeablebatteriesareonlyto be charged under adult
supervision.

5
PRODUCT FEATURES
1. On/Off Switch & Volume Control
This product has a single switch that
turns the unit ON or OFF and controls
the volume.
To turn the unit ON or adjust the volume,
slide the switch to Low/High.
To turn the unit OFF, slide the switch
to OFF.
2. TALK BUTTON
Press the Talk Button to hear the dino
or driver talk.
3. SOUND BUTTON
Press the Sound Button to hear cool
sound effects.
4. AUTOMATIC SHUT-OFF
To preserve battery life, the unit will automatically power-off after
several minutes without input.
Product Features

6
How to Switch
3. Turn the feet down. 4. Flip the legs up.
5. Turn the wheels to the sides,
andipthetailup.
Note: To change the car back into a dino, reverse the order of the
steps above.
6. Car shape.
2. Push the hands and jaw up.1.Dinosaurshape.
HOW TO SWITCH THE DINO TO A CAR

7
Care & Maintenance / Troubleshooting
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit is not in use for an extended
period of time.
4.Donotdroptheunitonhardsurfacesanddonotexposetheunitto
moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow
these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of batteries.
Iftheproblempersists,pleasecallourConsumerServicesDepartment
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.

8
Note
NOTE:
Thisequipmenthasbeentestedandfoundtocomplywiththelimits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmfulinterference inaresidential installation.This equipment
generates,usesandcanradiateradio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
thisequipmentdoescauseharmfulinterferencetoradioortelevision
reception,whichcanbedeterminedbyturningtheequipmentoffand
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorientorrelocatethereceivingantenna
• Increasetheseparationbetweentheequipmentandreceiver
• Connecttheequipmentintoanoutletonacircuitdifferentfromthat
to which the receiver is connected
• Consultthedealeroranexperiencedradio/TVtechnicianforhelp
Caution:changesormodicationsnotexpresslyapprovedbytheparty
responsible for compliance could void the user’s authority to operate
theequipment.
THISDEVICE COMPLIES WITH PART15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS:(1)THISDEVICEMAYNOTCAUSEHARMFUL
INTERFERENCE,AND(2)THISDEVICEMUSTACCEPTANY
INTERFERENCERECEIVED,INCLUDINGINTERFERENCE
THATMAYCAUSEUNDESIREDOPERATION.
THISCLASS B DIGITALAPPARATUS COMPLIESWITH
CANADIANICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST
CONFORMEÀLANORMENMB-003DUCANADA.