V-tech Pop-a-Balls Pop & Surprise Ball Center Assembly Instructions

91-003737-000 CAUS
Pop & Surprise Ball Center
Parent’s Guide
TM
TM

2
INTRODUCTION
Thank you for purchasing the VTech®Pop-a-Balls™Pop & Surprise
Ball Center™.This interactive ball tower features colorful popping balls,
twisting slides and cheerful animals that make playtime fun. Press the
big yellow button to send the balls up the tower, where they’ll pop out
of three different locations and roll down the slides. This tower is great
for seated or standing play, and is filled with ball popping fun!
On/Off/Volume
Control Switch
Mode Selector
Switch
Ball Storage
Slots
Music Button
Big Yellow ButtonSeesaw

3
INCLUDED IN THIS PACKAGE
A. One support base
D. One curved middle
track
G. One curved lower
stair track
J. One ball basin
B. One electronic tower
E. One curved upper
track
H. One middle track
with spinner
K. One monkey
F. One track support
tube
I. One curved upper
track
L. One ball ramp
C. One C-shaped
lower track

4
PN: 92-010321-000-100
Size: 174.6mm X 161.9mm
1
5
910
11
12 13
14
16 17 18
15
67
8
3
4
2
91-003737-000
CA
US
Pop & Surprise Ball Center
Parent’s Guide
TM
TM
M. One frog ball stopper N. One bird ball stopper O. One seesaw
P. Six colorful balls Q. One label sheet R. One parent's guide
WARNING: All packing materials such as tape, plastic
sheets, packaging locks, removable tags, cable
ties and packaging screws are not part of this
toy, and should be discarded for your child’s
safety.
NOTE: Please keep this parent's guide as it contains
important information.
ATTENTION : Pour la sécurité de votre enfant, débarrassez-
vous de tous les produits d’emballage tels
que rubans adhésifs, feuilles de plastique,
attaches, étiquettes et vis d’emballage. Ils ne
font pas partie du jouet.
NOTE : Il est conseillé de conserver ce guide des
parents car il comporte des informations
importantes.

5
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of
the unit. Use a screwdriver to loosen the
screw.
3. Install 2 new AA (LR6/AM-3) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is recommended for
maximum performance.)
4. Replace the battery cover and tighten the screw to secure.
BATTERY NOTICE
• Usenewalkalinebatteriesformaximumperformance.
• Useonlybatteriesofthesameorequivalenttypeasrecommended.
• Donotmixdifferenttypesofbatteries:alkaline,standard(carbon-
zinc) or rechargeable, or new and used batteries.
• Donotusedamagedbatteries.
• Insertbatterieswiththecorrectpolarity.
• Donotshort-circuitthebatteryterminals.
• Removeexhaustedbatteriesfromthetoy.
• Removebatteriesduringlongperiodsofnon-use.
• Donotdisposeofbatteriesinfire.
• Donotchargenon-rechargeablebatteries.
• Removerechargeablebatteriesfromthetoybeforecharging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
With the Pop-a-Balls™ Pop & Surprise Ball Center™, safety
comes first. To ensure your child’s safety, adult assembly is
required.Pleasecarefullyfollowtheassemblyinstructionsbelow
and make sure the final assembly is correct. Adult supervision
is recommended.

6
LABEL INSTRUCTIONS
Please securely adhere the labels to the playset as indicated below.
PN: 92-010321-000-100
Size: 174.6mm X 161.9mm
1
5
9
10
11
12 13
14
16 17 18
15
67
8
3
4
2

7
15914 16 17
23 4
10 613
12
8
7
18
15
11

8
ASSEMBLY INSTRUCTIONS
Assemble the parts in the different zones rst, then assemble the
zones together to complete the assembly.
Step 1: Trunk Assembly A + B + J + K + O

9
Step 2: Left Track Assembly C + D + E + L + M

10
Step 3: Right Track Assembly F + G + H + I + N