V-tech Toot-Toot Friends Pony & Friends Stable User manual

Game/PT Designer:
Peggie Xiao
IM Size: 101 X 127 MM
Purpose: / Website version
C&P Designer/Leader:Ronald Zhu / Leo Mo
US Designer: Isobel Thompson
AW Release Date: 2022/04/07
Item number-Product name ($29.99)

Instruction Manual
Pony & Friends Stable

C
M
Y
CM
MY
CY
CMY
K
Grow with VTech(101x127)bw1P-V2.pdf 1 08/18/2014 9:29:01

3
INTRODUCTION
Thank you for purchasing the Pony & Friends Stable.
Cute stable play set comes with lots of role-play features, including
multiple areas of play, 9 accessories and MagicPoint™ location for
fun character interaction!
MagicPoint™
Off/On/Mode
Selector
3 Light Up Buttons
One MagicPoint™
Character
Two Horses One Yellow
Bucket
One Yellow
Rake
Horse
Button

4
INCLUDED IN THIS PACKAGE
NOTE: This toy is not intended for teething.
One Stable House Two Horses One MagicPointTM
Character - Emma
Two Fences One Yellow Rake
One Weather Vane
One Back Wall
One Lift
Four Gates
One Yellow Bucket
One Small Bell
One Threshhold

5
WARNING:
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part of
this toy and should be discarded for your child’s safety.
NOTE: Please save this Instruction Manual as it contains important
information.
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned OFF.
2. Find the battery cover located underneath
the MagicPoint™ and use a screwdriver
to loosen the screw and open the battery
cover.
3. Remove old batteries by pulling up on one
end of each battery.
4. Install 2 new AA batteries following the
diagram inside the battery box.
One Right FenceOne Left Fence
2
3
5
7
6
8
4
1
One Label Sheet
One Card Backdrop
• One Quick Start Guide

6
5. Replace the battery cover and tighten the screw to secure.
WARNING: Adult assembly required for battery installation. Keep
batteries out of reach of children.
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as recommended
are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES:
• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and batteries, or
on their respective packaging, indicates they must not be disposed of
in domestic waste as they contain substances that can be damaging
to the environment and human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate that
the battery contains more than the specified value of mercury (Hg),
cadmium (Cd) or lead (Pb) set out in the Batteries and Accumulators
Regulation.
The solid bar indicates that the product was placed on the market
after 13th August, 2005.

7
Help protect the environment by disposing of your product or
batteries responsibly.
VTech®cares for the planet.
Care for the environment and give your toy a second life by disposing of it at a
small electricals collection point so all its materials can be recycled.
In the UK:
Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand:
Check with your local council for kerbside collections.
CAUTION:
Adult assembly required. For your child’s safety, do not let your child
play with this toy until it is fully assembled.
ASSEMBLY INSTRUCTIONS
With the VTech®Toot-Toot FriendsTM, safety comes first.
To ensure your child’s safety, adult assembly is required.
1. Insert the Weather Vane as shown in
the picture.
2. Insert the Lift as shown in the picture.

8
3. Insert the Small Bell as shown in the
picture.
4. Insert the Gates of the Stable House
as shown in the picture.
5. To assemble the Fences for the small
stable: Insert one side of the Left and
Right Fences on to the Back Wall,
then insert the other sides into both
sides of the Threshhold, as shown in
the picture.
6. Insert the Gates in to the Fences
on the small stable as shown in the
picture.

9
LABEL APPLICATION
Please securely stick the labels to the play set as indicated below.
2
3
5
7
6
8
4
1