V-tech Go! Go! Smart Friends Enchanted Princess... User manual

User’s Manual
© 2016 VTech
All rights reserved
Printed in China
Enchanted Princess Palace™
US
91-003236-002

Dear Parent,
Welcome to the world  Go! Go! Smart Friends®! We’re cited you’ve
decided to go on an adventure with us and plore all that Go! Go! Smart
Friends® has to er. ese ts have been designed to give your child a
thrilling learning perience with hours  fun.
Go! Go! Smart Friends® features a collection  characters and playsets
(each sold separately) that interact with your child by lighting up and
playing fun responses.  introduce themselves, talk about their
favorite things and more while encouraging first words and early
vocabulary. But that’s only the beginning  the learning citement!
When your child interacts with our innovative MagicPoint® technology,
th will love watching the characters and playsets come to life with
mion, lights, music, and sounds as th play!
Additionally, our Go! Go! Smart Friends® playsets feature buons, gears
and her manipulative elements to encourage the development  your
child’s fine mor skills. Some playsets also have walkway track pieces
that can be connected to her Go! Go! Smart Friends® playsets with
walkway track pieces as well as Go! Go! Smart Wheels® and Go! Go! Smart
Animals® playsets (each sold separately) to encourage creativity.
With Go! Go! Smart Friends®, it's playtime where iendship leads to
learning™!
Sincerely,
Your iends at VTech®
To learn more about VTech® ts, visit vtechkids.com

2
INTRODUCTION
Thank you for purchasing the VTech®Go! Go! Smart Friends®
Enchanted Princess Palace™.
This epic palace expands to more than four feet wide and has a variety
of luxurious rooms, including a ballroom, music room, kitchen, parlor
and observation tower. While exploring the palace with Princess
Darla, place her on the ve MagicPoint®locations to experience her
friendly personality, lights and more. When Princess Darla sits at her
MagicChatTM tea set table with a friend (additional characters sold
separately), they will chat and sing with each other.
INTRODUCTION
THREE ACCESSORIES
CLOCK
OBSERVATION
TOWER
ELEVATOR
BALLROOMSPINNING
WHEEL
MAGICCHATTM
TEA SET
SWING
3 LIGHT-UP
BUTTONS
STAIRS
MAGICPOINT®CHARACTER

3
INCLUDED IN THIS PACKAGE
• One MagicPoint®character
• Two pillars
• One observation tower railing
• One 1st oor main wall
• One 2nd oor main wall
• One 1st oor base and dance oor with one MagicPoint®
location
• One 2nd oor base with one MagicPoint®location
• One bed
INCLUDED IN THIS PACKAGE
NOTE: This toy is not intended for teething.
• One harp • One mirror

4
• One electronic clock tower
• Four ags
• One twin tower roof with toy engravings inside
• One twin tower roof with a smooth surface for label application
• One single tower roof
• Two piers
• One staircase
• One tower bridge
• One MagicChatTM tea set with two MagicPoint®locations
• One tea set base
• One tower base
• One elevator platform
• One elevator tower support cover
• One tower with elevator support
INCLUDED IN THIS PACKAGE

5
• Two swing ropes
• Two doors
• One MagicPoint®support cover
• One chandelier support cover
• Two label sheets
• One label instruction sheet
• User’s manual
INCLUDED IN THIS PACKAGE
• One small bridge
• One swing seat

6
Unlock the packaging lock:
There is one packaging lock located on the character.
Use a coin or screwdriver to loosen
the screw.
Pull out the screw with the packaging
lock and discard them.
1
2
WARNING:
All packing materials, such as tape, plastic sheets, screws,
packaging locks and tags are not part of this toy and should be
discarded for your child’s safety.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous les
produits d’emballage tels que rubans adhésifs, feuilles de plastique,
vis, attaches et étiquettes. Ils ne font pas partie du jouet.
NOTE: Please keep this user’s manual as it contains important
information.
GETTING STARTED
BATTERY INSTALLATION - CHARACTER
1. Make sure the unit is OFF.
2. Locate the battery cover on the bottom of the
unit. Use a screwdriver to loosen the screws.
3. Install 2 new AAA (LR03/AM-4) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
GETTING STARTED

7
4 Replace the battery cover and tighten the
screws to secure.
BATTERY INSTALLATION -
ELECTRONIC CLOCK TOWER
1. Make sure the unit is OFF.
2. Locate the battery cover on the back of the
clock tower. Use a screwdriver to loosen the
screw.
3. Install 2 new AA (LR6/AM-3) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in re.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
GETTING STARTED

8
ASSEMBLY INSTRUCTIONS
With the VTech®Go! Go! Smart Friends®Enchanted Princess
PalaceTM, safety comes rst. To ensure your child’s safety, adult
assembly is required.
1 Insert the two PILLARS into the
1ST FLOOR BASE as shown in
the picture. You will hear a “click”
sound when the pieces are secure.
2. Insert the 1ST FLOOR MAIN WALL
into the 1ST FLOOR BASE as
shown in the picture. You will hear
a “click” sound when the pieces are
secure.
3 Attach the two DOORS to the 1ST FLOOR MAIN WALL and 1ST
FLOOR BASE as shown in the picture.
Note: The door prongs are each a distinct shape. Carefully check
the shape of each door prong and ensure you are inserting it into
the correct hole.
ASSEMBLY INSTRUCTIONS

9
4. Insert the OBSERVATION TOWER RAILING into the 2ND FLOOR
BASE. Then, attach the 2ND FLOOR BASE to the 1ST FLOOR
MAIN WALL as shown in the picture.
5. Insert the 2ND FLOOR MAIN
WALL into the 2ND FLOOR BASE
as shown in the picture.
6. Insert the ELECTRONIC CLOCK TOWER, the TWIN TOWER WITH
TOY ENGRAVINGS and the SINGLE TOWER ROOF into the 2ND
FLOOR MAIN WALL as shown in the picture. You will hear a “click”
sound when the pieces are secure.
ASSEMBLY INSTRUCTIONS
Twin Tower with
Toy Engravings