V-tech Grip 'n Go Driver User manual

®
TM

1
Dear Parent:
At VTECH®we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best of their ability. Whether it’s introducing numbers and letters,
identifying colors and shapes, or stimulating senses with lights
and music, all VTECH®infant and toddler learning products
encourage your child’s natural growth and discovery skills. When
it comes to providing electronic learning products that enlighten,
entertain and develop minds, at VTECH®we see the potential in
every child.

2
INTRODUCTION
Thank you for purchasing the VTECH®Grip ‘n Go DriverTM learning toy!
We at VTECH®are committed to providing the best possible products to
entertain and educate your child. Should you have any questions or
concerns, please call our Consumer Services Department at 1-800-521-
2010 in the U.S. or 1-800-267-7377 in Canada.
The VTECH® Grip ‘n GoDriverTM is a fun electronic steering wheel for
toddlers6monthsandup.Threechunky buttonsteachemergencyvehicle
names and sound effects in one mode and shape identification and
melodies in the other. The oversized horn button will amuse baby with
the three unique ‘horn’sound effects. The VTECH®Grip ‘n Go DriverTM
is equipped with an attachment strap that easily attaches to the stroller
for fun on the go.
POLICE
CAR
BUTTON
ON/OFF/MODE
SELECTOR SWITCH
FIRE ENGINE
BUTTON
HORN
BUTTON
FLASHING
LIGHTS
AMBULANCE
BUTTON
®
Grip 'n Go Driver™

3
INCLUDED IN THIS PACKAGE
- One VTECH®Grip ‘n Go DriverTM learning toy.
- One instruction manual.
- One attachment strap.
WARNING: All packing materials, such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be
discarded for your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of
the unit. Use a screwdriver to loosen the
screw.
3. Install 2 new “AAA” (UM-4/LR03)
batteriesfollowingthediagraminside the
battery box. (The use of new alkaline
batteries is recommended for maximum
performance.)
4. Replacethebatterycoverand tighten the screwtosecure the battery
cover.
+

4
BATTERY NOTICE
• Install batteries correctly observing the polarity ( +, - ) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batteries from the equipment when the
unit will not be used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE: If for some reason the program/activity stops working, please
follow these steps
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3.Let the unit stand fora few minutes,then replace thebatteries.
4. Turn the unit ON. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada, and a service representative will be happy to help you.

5
TO BEGIN PLAY
1. Slide the ON/OFF/MODE SELECTOR
SWITCH to the TALKING MODE ( )
ortheMELODYMODE ( )positionto
turn the unit ON.
2. Toadjustthevolume,slidetheVOLUME
CONTROLSWITCHlocated ontheback
of the unit to ( ) for LOW VOLUME
or ( ) for HIGH VOLUME.
3. Slide the ON/OFF/MODE SELECTOR
SWITCHtotheOFF ( ) position to turn
the unit OFF.

6
4. To remove the attachment strap, hold
ontotheattachmentstrap andgentlypull
on the steering wheel. To re-attach it,
pushbothpieced togetheruntiltheylock.
Note: To preservebatterylife,theVTECH®Grip ‘n Go DriverTM learning
toywillautomaticallypowerdownafter about ten seconds without
input. The unit can be turned on again by pressing any button.
ACTIVITIES
A. Talking Mode
1. SlidetheON/OFF/MODESELECTOR
SWITCH to the TALKING MODE
()position.Youwillhear“Let’sgo!”
followed by a short tune. All the lights
will flash randomly with the sound.
2. Press the FIRE ENGINE BUTTON to
hear “fire engine” followed by a siren
soundeffect.Thecorrespondinglight
will flash with the voice and sound
effect.
“Let’s go”
+ short tune
Grip 'n Go Driver™
®
“Fire engine”+
siren sound effect

7
3. PresstheAMBULANCE BUTTON to
hear“ambulance”followedbya siren
soundeffect.Thecorrespondinglight
will flash with the voice and sound
effect.
4. Press the POLICE CAR BUTTON to
hear “police car” followed by a siren
soundeffect.Thecorrespondinglight
will flash with the voice and sound
effect.
5. Press the HORN BUTTON to hear a
random horn sound effect. The
corresponding light will flash with the
sound effect.
“Ambulance”+
siren sound effect
“Police car”+
siren sound effect
®
Random horn
sound effect
Grip 'n Go Driver™
VTECH
Printed in China
91-01446-000

8
6. Turn the WHEEL to hear a random
upbeatmelody. Allthelightswillflash
randomly with the melody.
B. Melody Mode
1. SlidetheON/OFF/MODESELECTOR
SWITCHtotheMELODYMODE( )
position.Youwillhear“let’sgo!”followed
by a short tune. All the lights will flash
randomly with the sound.
2. Press the FIRE ENGINE BUTTON to
hear“square”followed byonerandom
melody. The corresponding light will
flash with the voice and all the lights
will flash with the music.
®
Grip 'n Go Driver™
“Let’s go”
+ short tune
“Square”+
melody

9
3. Press the AMBULANCE BUTTON to
hear “circle” followed by one random
melody. The corresponding light will
flash with the voice and all the lights
will flash with the music.
4. Press the POLICE CAR BUTTON to
hear “triangle” followed by one
random melody. The corresponding
light will flash with the voice and all
the lights will flash with the music.
5. Press the HORN BUTTON to hear a
random horn sound effect. The
corresponding light will flash with the
sound effect.
“Circle”+
melody
“Triangle”+
melody
Grip 'n Go Driver™
®
Random horn
sound effect