V-tech Voyager Adventure System User manual

User’s Manual
Voyager Adventure
SystemTM
© 2002 VTech
Printed in China
91-01554-000-000

11
Dear Parent:
At VTech®, we know how children love to take control of
playtime, creating their own fun adventures and making their
own discoveries. That’s why we created the Voyager Adventure
System ™ - a system of interactive learning products that
empower children while learning, and spark their curiosity for
more.
The Voyager Adventure System™ delivers a personalized learning
experience where fun, interactive adventures come to life with
incredible realism. Children just point and touch to explore ten
feet of colorful, scrolling landscapes that are filled with cool
sound effects and vivid imagery.
Each Voyager adventure uses revolutionary technology that
actually tracks your child’s progress and remembers where they
have traveled on their learning journey then responds and
adapts to keep the adventure new and exciting. With Voyager,
children control the adventure and decide where they want to
go - no two adventures will be the same!
Adventure Packs are expandable accessories that allow the
Voyager Station to deliver new stories and educational activities
to keep children constantly engaged. Each accessory has over
20 games that teach important skills such as reading, math
and problem solving. With new Adventure Packs, the learning
and fun won’t end.
At VTech®, we are committed to creating fun learning toys that
foster a child’s intellectual and social development. We thank
you for trusting VTech®with the important job of helping your
child explore a new world of learning!
Sincerely,
Your Friends at VTech®
To learn more about the Voyager Adventure System™ and other VTech®toys,
please visit www.vtechkids.com

10
TABLE OF CONTENTS
INTRODUCTION ...........................................................................................1
GETTING STARTED ..................................................................................... 2
POWER SOURCE .....................................................................................2-4
BATTERY INSTALLATION .............................................................................................. 3
AC ADAPTOR CONNECTION ...................................................................................... 3
BATTERY NOTICE ........................................................................................................... 4
IF YOUR UNIT DOESN’T TURN ON OR STOPS RESPONDING ....................................... 4
STILL HAVING PROBLEMS? ....................................................................................... 4
ADVENTURE STATIONTM BUTTONS .................................................. 4-5
ADVENTURE STATIONTM KEYBOARD ................................................ 5-7
TROUBLESHOOTING..............................................................................7-8
CARE AND MAINTENANCE .......................................................................9

1
Introduction
VOYAGER ADVENTURE STATION TM
Thank you for purchasing the VTech®Voyager Adventure Station™. The Voyager
Adventure Station is an interactive learning platform that allows kids to learn at their
own pace as they explore colorful, scrolling adventures. With advanced technologies
such as a touch-screen, attached stylus, LCD screen and a keyboard, Voyager offers
unprecedented child-directed interactivity.
The Voyager Adventure System™ includes a free starter Adventure Pack titled
“Snapshot Safari” so your child can start exploring immediately. Additional Adventure
Packs are sold separately, each introducing new stories, characters and educational
content that puts kids in control of learning!
Touch screen
Touch Pen
On Button
Off Button
LCD Screen
Keyboard
Adventure
Pack Lock
Left Scroll
Button
Right Scroll
Button
Adaptor Jack
Stand
Volume
Control
Battery Door

2
Getting Started
1. ATTACH ADVENTURE PACK
• Make sure the unit is turned OFF.
• Slide the Adventure Pack into the main unit as shown below.
• Press firmly until the Adventure Pack is locked into place by the lock at the top
of the unit.
2. SUPPLY POWER
Insert 4 C (UM-2/LR14) batteries.
Power can also be supplied through a 9V 300mA AC center-
positive power adaptor (sold separately).
3. PRESS THE ON BUTTON AND PLAY!
POWER SOURCE:
The VTech®Voyager Adventure Station™ operates on 4 C (UM-2/LR14) batteries
or using a 9V 300mA AC center-positive power adaptor.
(1) (2) (3)

3
BATTERY INSTALLATION:
1. Make sure the unit is turned OFF.
2. locate the battery cover on the back of Voyager and open it.
3. Insert 4 new C (UM-2/LR14) batteries, as illustrated.
(The use of alkaline batteries is recommended for
maximum performance.)
4. Close the battery cover.
STANDARD FOR BATTERY TOYS
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being charged (if
removable).
• Rechargeable batteries are only to be charged under adult supervision (if
removable).
• Different types of batteries or new and used batteries are not to be mixed.
• Only batteries of the same or equivalent type as recommended are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than recommended number of power
supplies.
• Do not dispose of battery in fire.
NOTE: If the unit suddenly stops working or the sound becomes weak, turn the unit
off for 15 seconds, then turn it back on. If the problem persists it may be
caused by weak batteries. Please install a new set of batteries and try the
unit again.
AC ADAPTOR
Use VTech®or any standard adaptor complying with EN61558 DC 9V 300mA
AC centre - positive adaptor.
CONNECTION:
1. Make sure the unit is OFF.
2. Locate the adaptor jack on the right side of the unit.
3. Insert the adaptor plug into the unit’s adaptor jack.
4. Plug the adaptor into the unit's adaptor jack
5. Turn the unit ON.

4
NOTE: If the unit suddenly stops working or the sound seems weak, it may be the
result of the adaptor connection. Turn the unit off and unplug the adaptor
for 15 seconds. Next, plug the adaptor back in and turn the unit on. If the
problem persists.
Do not leave the adaptor plugged in for long periods of time if the unit is not in use.
STANDARD FOR TRANSFORMER TOYS
• The toy is not intended for children under 3 years old;
• The toy must only be used with the recommended transformer;
• The transformer is not a toy;
• Toys liable to be cleaned with liquid are to be disconnected from the transformer
before cleaning;
• The toy is not to be connected to more than recommended number of power
supplies.
NOTICE TO PARENT
The transformer used with the toy is to be regularly examined for damage to the
cord, plug, enclosure and other parts, and that, in the event of such damage, the
toy must not be used with this transformer until the damage has been repaired.
IF YOUR UNIT DOESN’T TURN ON OR STOPS RESPONDING
If the unit does not respond when pressing the On button, or if the unit suddenly
stops responding, the batteries may need to be replaced.
STILL HAVING PROBLEMS?
If the problem persists, please call our Consumer Services Department at 1-800-521-
2010 in the U.S, or 1-800-267-7377 in Canada and a service representative will be
happy to help you.
Adventure StationTM Buttons
The VTech®Adventure Station™ has several buttons to help start your learning
adventure.
ON AND OFF
Press the ON button to turn the unit on and
press the OFF button to turn the unit off.

5
AUTOMATIC SHUT-OFF
If there is no input into the Voyager Adventure StationTM for several minutes the
unit will automatically shut off to save power. Once the unit is off, please press the
ON button to restart. We recommend that you turn the unit off when not playing
with it. If the Voyager learning product is not going to be used for a long period
of time, remove the batteries and unplug the adapter.
RIGHT AND LEFT BUTTONS
Press the right and left buttons to scroll the
picture left or right. A light tap will move the
picture one segment and holding the button
down will continuously scroll the picture.
VOLUME CONTROL
Turn the dial to turn the volume up or down.
Adventure StationTM Keyboard
VTech’s Voyager Adventure Station™ has soft QWERTY-style keyboard with 47 keys.
Please look below for a general description of these keys, but consult individual
Adventure Pack instructions for variations on these functions.

6
Help
Press this key when you need help answering a question. It will tell
you how you can answer - either by touching the picture with the pen
or by using the keyboard.
Repeat
Press this key while in an activity to repeat the question, word or
instruction.
Erase
Press this key to delete letters or numbers you typed on the screen.
Music On/ Off
Press this key to turn the background music on or off.
Caps Lock
Press this key and all the letters you type will be uppercase. Press
it again and the letters will be lowercase again.
Story Key
Press this key to hear the story of the Adventure Pack.
Directional Keys
The Directional keys, ‘Up/Down/Left/Right’ move the cursor on the screen
or help you view all the text on the screen
.
Enter Key
Press this key when you are finished answering or typing a response.

7
Number and Letter Keys
Use these keys to answer questions or type letters and numbers.
TroubleShooting
1. When I press the On button nothing happens:
If you are using batteries, check to see if they are aligned correctly. If they are, but
the Voyager is still not working, try to replace the batteries with a new set.
If you are using the AC adaptor (sold separately) check that it is firmly connected.
2. Voyager forgets my name and loses my adventure
when I turn it off:
This is normal - when the Voyager Adventure StationTM powers off, it gets ready
for a new player and a new adventure.
3. System Message
1. Low Battery
Please replace batteries when you see
this animation.
2. “Cartridge Not Compatible”
The cartridge is not compatible with the unit. Please insert
another cartridge.
3. Malfunction Animation
This animation indicates that the paper has jammed or the
scrolling sensor has malfunctioned. Please try the following steps:
• Turn the unit OFF and remove the batteries. Let the unit
sit for one minute and then replace the batteries
and turn the unit back ON.