VALBERG CNF 326 D X742C User manual

MADE IN PRC
ELECTRO DEPOT
1 route de Vendeville
59155 FACHES-THUMESNIL
FRANCE
EN
WARRANTY CONDITION
This product has a 2-year warranty as of the date of purchase*, covering any fault resulting from
a manufacturing or material defect. This warranty does not cover defects or damage resulting
from incorrect installation, improper use or abnormal wear of the appliance.
*upon presentation of the sales receipt.
FR
CONDITION DE GARANTIE
Ce produit est garanti pour une période de 2 ans à partir de la date d’achat*, contre toute
défaillance résultant d’un vice de fabrication ou de matériau. Cette garantie ne couvre pas les
vices ou les dommages résultant d’une mauvaise installation, d’une utilisation incorrecte ou
de l’usure anormale du produit.
*sur présentation du ticket de caisse.
NL
GARANTIEVOORWAARDEN
Dit product wordt gegarandeerd voor een periode van 2 jaar vanaf de aankoopdatum*, voor
elke storing die het gevolg is van een fabricagefout of het materiaal. Gebreken of schade door
slechte installatie, onjuist gebruik of abnormale slijtage van het product worden niet gedekt
door deze garantie.
*op vertoon van kassabon.
ES
CONDICIONES DE GARANTÍA
El certificado de garantía de este producto tiene una duración de 2 años a partir de la fecha de
compra* que se limita a los defectos de fabricación y averías del material. Se excluyen de la
garantía deficiencias o daños originados por una mala instalación, errores en la manipulación
o por un uso inadecuado.
*previa presentación del comprobante de compra.

977519 - CNF 326 D X742C
2/2 12/2022-V1
Fridge freezer
Réfrigérateur-congélateur
Koelkast - diepvriezer
Frigorífico - congelador
INSTRUCTIONS FOR USE ....................02
CONSIGNES D'UTILISATION ....................24
GEBRUIKSAANWIJZINGEN ....................46
INSTRUCCIONES DE USO ....................68

1
2
3
4
5
6
7

2 FR2 EN
Thanks!
Thank you for choosing this VALBERG product.
Chosen, tested and recommended by ELECTRO DEPOT,
the products of the VALBERG brand are easy to use,
reliable and of an impeccable standard.
Thanks to this appliance, you can be sure that each
use will bring you satisfaction.
Welcome to ELECTRO DEPOT.
Visit our website: www.electrodepot.fr

3FR
Aperçu de l’appareil
A
3 EN
Table of contents
APreview of the
appliance
CUseful information
BUsing the appliance Installation
Door reversibility
User interface
Helpful hints and tips
Cleaning and care
Troubleshooting
Description of the appliance

4EN
Preview of the appliance
A
Description of the appliance
1Thermostat and Light
2Fridge Shelves
3Crisper Cover
4Crisper
5Freezer Drawers
6Leveling Feet
7Fridge Balconies
The picture is for reference only. Real appliance probably is different.

5EN
Using the appliance
B
Installation
Space requirement
• Select a location without direct exposure to sunlight;
• Select a location with enough space for the refrigerator doors to open easily;
• Select a location with level (or nearly level) flooring;
• Allow sufficient space to install the refrigerator on a flat surface;
• Allow clearance to the right, left, back and top when installing. This will help reduce
power consumption and keep your energy bills lower.
• Keep at lest 50 mm gap at two sides and back.
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate
class indicated on the rating plate of the appliance:
For refrigerating appliances with climate class:
• extended temperate: ‘this refrigerating appliance is intended to be used at ambient
temperatures ranging from 10 ° C to 32 ° C (SN);
• temperate: ‘this refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 ° C to 32 ° C (N);
• subtropical: ‘this refrigerating appliance is intended to be used at ambient temperatures
ranging from 16 ° C to 38 ° C (ST);
• tropical: ‘this refrigerating appliance is intended to be used at ambient temperatures
ranging from 16°C to 43 ° C (T);
Location
The appliance should be installed well away from sources of heat such as radiators, boilers,
direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet.
To ensure best performance, if the appliance is positioned below an overhanging wall unit, the
minimum distance between the top of the cabi-net and the wall unit must be at least 50mm.
Ideally, however, the appliance should not be positioned below overhanging wall units. Accurate
leveling is ensured by one or more adjust-able feet at the base of the cabinet.

6EN
Using the appliance
B
WARNING
It must be possible to disconnect the appliance from the
mains power supp-ly; the plug must therefore be easily
accessible after installation.
Electronical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate correspond
to your domestic power supply. The appliance must be earthed. The power supply cable plug
is provided with a contact for this purpose. If the domestic power supply socket is not earthed,
connect the appliance to a separate earth in compliance with current regulations, consulting
a qualified electrician.
The manufacturer declines all responsibilityif the above safety precautions are not observed.
This appliance complies with the E.E.C. Directives.

7EN
Using the appliance
B
Door Reversibility
Before reversing the door, please be prepared below tools and material: straight screwdriver,
cross screwdriver, spanner and the components included in the poly bag:
Left Door Hinge Cover x I Left Aid-Closer on Upper
Door x I
Left Aid-Closer on Lower
Door X I
1. Unscrew top hinge cover and then unscrew the top hinge. Then lift upper door and placei
ton a soft pad to avoid scratch and damage.

8EN
Using the appliance
B
2. Remove the top left screw cover.
3. Take off the upper door, take out the screw from the middle hinge by cross screwdriver,
then take off the lower door.
4. Laying down the refrigerator, take out the adjusting feet as below, then take off the lower
hinge by cross screwdriver.
5. Adjusting the hinge core position of the lower hinge and upper hinge to opposite position.

9EN
Using the appliance
B
6. Install the lower hinge under to the refrigerator like below, screwing in the adjusting feet,
make sure the position in horizon.
7. Detach the Fndge and the Freezer door gaskets and then attach them after rotating.
8. Remove the original aid-closers from upper and lower door, then install the aid-closers
from the internal bag (with instruction manuals) to the opposite side.
9. Install the lower door, adjust and fix the middle hinge onto the cabinet.

10 EN
Using the appliance
B
10. Place the upper door back on. Ensure the door is aligned horizontally and vertically so that
the seal are closed on all sides before finally tightening the top hinge.Then inert the top
hinge and screw it to the top of unit and then fix hinge cover (in accessary bag) by screw.
11. Fix the screw cover.
Space Requirement
Keep enough space of door open.
A600
B600
C2010
Dmin = 50
Emin = 50
Fmin = 50
G1200
H1200
I135°

11 EN
Using the appliance
B
Levelling the unit
• To do this adjust the two levelling feet at front of the unit.
• If the unit is not level, the doors and magnetic seal alignments will not be covered
properly.
ShortenLengthen

12 EN
Using the appliance
B
User interface
Temperature setting of fridge compartment
Fridge temperature setting Panel
12A
Operation button
Set button
Short press this button select running temperature.
Keep pressing this button for 3s to select «Super» mode.
Indicators
1. Super mode indicator: the light is on when Super mode is selected.
2. Setting Temperature indicators of fridge compartment. The lighted indicat or means
related temperature is selected.
Super mode
Activate super mode
Keep pressing button for 3s,super mode will be activated, indicator will be lighted.
When super mode is activated, fridge temperature will remain previous setting and can not
be changed by pressing button.
Quit from Super mode
• Press Set button (A) for over 3 seconds
• Or the appliance will automatically restore to original setting when Super mode has
running for more than 50 hours

13 EN
Using the appliance
B
Temperature setting of the Freezer Compartment
The freezer temperature setting slider
• This slider in fridge compartment is used to adjust temperature of freezer compartment.
• Slider is positioned toward , the temperature in freezer compartment will be higher.
Contrarily, the temperature in freezer compartment will be lower if the slider is moved
toward .
• Middle position slicer is aavisea position ior normai using.
• To get lowest temperature in freezer compartment, you can adjust setting knob at coldest
and position the slider at .
Temperature setting recommendation
Environment
Temperature Freezer compartment Fridge compartment
Summer
(Above 38°C) Set on