VALBERG CNF 378 C X625C2 User manual

EN
WARRANTY CONDITION
This product is guaranteed for a period of 2 years from the date of purchase* against any failure
resulting from a manufacturing or material defect. This warranty does not cover defects or
damage resulting from incorrect installation, improper use or abnormal wear of the product.
*as shown on the sales receipt.
FR
CONDITION DE GARANTIE
Ce produit est garanti pour une période de 2 ans à partir de la date d’achat*, contre toute
défaillance résultant d’un vice de fabrication ou de matériau. Cette garantie ne couvre pas les
vices ou les dommages résultant d’une mauvaise installation, d’une utilisation incorrecte ou
de l’usure anormale du produit.
*sur présentation du ticket de caisse.
NL
GARANTIEVOORWAARDEN
Dit product wordt gegarandeerd voor een periode van 2 jaar vanaf de aankoopdatum*, voor
elke storing die het gevolg is van een fabricagefout of het materiaal. Gebreken of schade door
slechte installatie, onjuist gebruik of abnormale slijtage van het product worden niet gedekt
door deze garantie.
*op vertoon van kassabon.
ES
CONDICIONES DE GARANTÍA
El certificado de garantía de este producto tiene una duración de 2 años a partir de la fecha de
compra* que se limita a los defectos de fabricación y averías del material. Se excluyen de la
garantía deficiencias o daños originados por una mala instalación, errores en la manipulación
o por un uso inadecuado.
*previa presentación del comprobante de compra.
MADE IN PRC
ELECTRO DEPOT
1 route de Vendeville
59155 FACHES-THUMESNIL
FRANCE

976752 - CNF 378 C X625C2
INSTRUCTIONS FOR USE ....................02
CONSIGNES D'UTILISATION ....................26
GEBRUIKSAANWIJZINGEN ....................52
INSTRUCCIONES DE USO ....................76
11/2022 - V3
Refrigerator - Freezer
Réfrigérateur- congélateur
Koelkast - Diepvriezer
Frigorífico- Congelador
2/2

2
8
4
7
5
1
3
6

2 EN2 EN
Thanks!
Thank you for choosing this VALBERG product.
Chosen, tested and recommended by ELECTRO DEPOT,
the products of the VALBERG brand are easy to use,
reliable and of an impeccable standard.
Thanks to this appliance, you can be sure that each
use will bring you satisfaction.
Welcome to ELECTRO DEPOT.
Visit our website: www.electrodepot.fr

3 EN3 EN
Table of contents
APreview of the
appliance
CUseful information
BUsing the appliance
Description of the appliance
Proper use of refrigerator
Structure and functions
Maintenance and care of the refrigerators
Troubleshooting

4EN
Preview of the appliance
A
Description of the appliance
1LED light 5Meat and fish box
2Shelf 6Drawer
3LED light (for some models) 7Door switch
4Fruits and vegetables box 8Door tray
(The picture above is only for reference.The actual configuration will depend on the physical
product or statement by the distributor)
Refrigerating chamber
• The Refrigerating Chamber is suitable for storage of a variety of fruits, vegetables,
beverages and other food consumed in the short term,suggested storage time 3days to
5days.
• Cooking foods shall not be pul in the refrigerating chamber until cooled to room
temperature.
• Foods are recommended to be sealed up before putling into the refrigerator.
• The glass shelves can be adjusted up or down for a reasonable amount of storage space
and easy use.
Freezing chamber
• The low temperature freezing chamber may keep food fresh for a long time and it is mainly
used to store frozen foods and making ice.
• The freezing chamber is suitable for storage of meat, fish, rice balls and other foods not to
be consumed in short term.
• Chunks of meat are preferably to be divided into small pieces for easy access. Please be
noted food shall be consumed within the shelf time.
Drawers, food boxes, shelves, etc. placed according to the position in the picture above are
the most energy efficient.
Thermostat setting for ambient T°C : NORMAL ≈ +24°C (± 4°C) : +4°C / -18°C
Thermostat setting for ambient T°C : COLD ≈ +16°C (± 4°C) : +4°C / -19°C
Thermostat setting for ambient T°C : HOT ≈ +32°C (± 4°C) : +4°C / -19°C

5EN
Using the appliance
B
Proper use of refrigerator
Placement
• Before use, remove all packing materials, including bottom cushions, foam pads and tapes
inside of the refrigerator; tear off the protective film on the doors and the refrigerator body.
• Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery
places to prevent rust or reduction of insulating effect.
• Do not spray or wash the refrigerator; do not put the refrigerator in moist places easy to be
splashed with water so as not to affect the electrical insulation properties of the refrigerator.
• The refrigerator is placed in a well-ventilated indoor place; the ground shall be flat, and
sturdy (rotate left or right to adjust the wheel for leveling if unstable).

6EN
Using the appliance
B
• This refrigerator needs to be installed independently and cannot be used as a built-in.
Otherwise, it will cause problems such as failure to install into the cabinet, the performance
and life of the product are reduced. And the manufacturer does not provide basic product
warranty.
• The top space of the refrigerator shall be greater than 30cm, and the refrigerator should
be placed against a wall with a free distance more than 10cm to facilitate heat dissipation.
• Spare enough space for convenient opening of the doors and drawers.
The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor.

7EN
Using the appliance
B
Leveling feet
Schematic diagram of the levelling feet
LH
(The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor.)
Adjusting procedures:
a. Turn the feet clockwise to raise the refrigerator;
b. Turn the feet counterclockwise to lower the refrigerator;
c. Adjust the right and left feet based on the procedures above to a horizontal level.
Door right-left change
List of tools to be provided by the user
Cross-screwdriver
5/16" socket and ratchet
Putty knife thin-blade screwdriver
Masking tape

8EN
Using the appliance
B
Parts to be used for door reverse
SN part Quantity Notes
1 Upper hinge 1 Pre-installed on refrigerator, removed and retained it
when changing the door
2Upper hinge
cover 1Pre-installed on refrigerator, removed and retained it when changing the door
3 Decorative cover 1 Pre-installed on refrigerator, removed and retained it
when changing the door
4Door self-
locking 2Pre-installed on refrigerator, removed and retained it when changing the door
5 Middle hinge 1 Pre-installed on the refrigerator and to be used when
changing the door
6 Decorative cover 1 Pre-installed on the refrigerator and to be used when
changing the door
7 Lower hinge 1 Pre-installed on the refrigerator and to be used when
changing the door
8 Levelling feet 1 Pre-installed on the refrigerator and to be used when
changing the door
9 Left upper hinge 1 In the attached plastic bag, take them out for use
when door is reversed
10 Left upper hinge
cover 1In the attached plastic bag, take them out for use when door is reversed
11 Left door self-
locking 2In the attached plastic bag, take them out for use when door is reversed
12 Right plastic
cover 1In the attached plastic bag, take them out for use when door is reversed

9EN
Using the appliance
B
1. Please power off this appliance before conduct this operation. Remove all food from door
shelves.
2. Remove the upper lefl hinge cover decorative cover, upper right hinge cover and upper
right hinge, and disconnect the right signal line (signal line terminal 1, 2) at the top of
the box body
upper hinge
decorative
cover
upper hinge cover
1
2
3. Remove the refrigerated door body (be careful not to lose small parts such as the shaft
sleeve and stop on the door);
Remove the middle hinge and remove the decorative cover of hinge hole on the other side.
middle hinge
decorative
cover

10 EN
Using the appliance
B
4. Remove the freezing door body (be careful not to lose small parts such as the shaft sleeve
and stop on the door);
Remove the hinge and adjust the angle. Remove and install the lower hinge shaft to the other
side of the hinge, and install the modified lower hinge to the other side of the box.
5. Change the refrigerator doar:
1) Remove the cover plate of the upper end cover of the refrigeration doar and the lefl
decorative cover. lnstall the upper shaft sleeve and the signal line of the doar body to the
other side and cover the upper end cover plate. Take out the right decorative cover from the
accessory bag and install it to the other side of the upper end cover.
2) Remove the doar self-locking, doar stop and shaft sleeve of the refrigeration doar, take out
the lefl doar self-locking from the accessory bag, install it on the lefl side of the lower end
cover of the refrigeration doar, change the doar stop and shaft sleeve to the lefl side of the
lower end cover of the refrigeration doar.

11 EN
Using the appliance
B
6. Change the freezing doar:
1) Remove the shaft sleeve and cap of the upper end cover of the freezing doar and install
them at the lefl and right swap positions.
2) Remove the doar self-locking, doar stop and shaft sleeve of the freezing doar, take out the
lefl doar self-locking from the accessory bag, install it on the lefl side of the lower end cover
of the freezing doar, change the doar stop and shaft sleeve to the lefl side of the lower end
cover of the freezing doar.
7. lnstall the replaced freezing dooron the lower hinge, then install the middle hinge and
cover the hinge hole decorative cover.
middle hinge
decorative
cover

12 EN
Using the appliance
B
8. Remove the upper left hinge cover and upper left hinge from the accessory bag.
Place the refrigerated door body on the middle hinge and install the upper left hinge.
Connect the refrigerator top signal line 4to the door body signal line 1, and connect the
signal line 2to the signal line 3. Finally, replace the hinge decorative cover to the right
side of the box body.
NOTE:
When replacing the hinge decorative cover to the right side
of the box body, the two inserts on the hinge decorative
cover (as shown in the figure) shall be cut off.
1
42
3
upper hinge
upper hinge cover
decorative cover inserts
The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor.

13 EN
Using the appliance
B
Changing the light
This product contains a light source of energy efficiency class G for top light and exempted
of energy class for side light.
Light sources in this product can only be replaced by qualified professionals.
Please contact after-sales service if a light source fails.
The light sources shall be removed at the end of the product’s useful life, with sorting and
recycling done separately.
Light source in this product is replaceable only by qualified engineers.
1. Please take out the plug before removal.
2. Remove the lampshade with a screwdriver.
3. Take down the lamp panel.
4. Remove the connection terminal.
Starting
• After transportation, please let the product stay for more than 2 hours before turning on
the power, otherwise it will lead to a decrease in cooling capacity or a damage to the product.
• Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or
for above 4 hours in summer when the ambient temperature is high.