Valcom VE9894-1-Finish User manual

1 947786
Issue 1
IP HANDSFREE CALL STATION
VE9894-1-Finish (Single Button)
VE9894-2-Finish (Two Button)
VE9894-3-Finish (Three Button)
VE9894-4-Finish (Four Button)
INTRODUCTION
The VE9894-x-Finish Vandal Resistant IP
Handsfree Emergency Call Station provides
communication to a multiple answer locations, i.e.
Emergency assistance, general assistance,
information, directions and public accessible
recorded information.
Pressing a “Call” button on the IP emergency
phone initiates a call to any SIP telephone, SIP
address, PC softphone, Valcom intercom station or
to a Valcom IP gateway. At the time of activation a
call status LED begins to flash. When the call is
answered the call status LED remains “ON”. When
the called party terminates the call, the LED is
extinguished, the connection is released
automatically. An “Emergency Call” has priority
over any other call in progress.
SPECIFICATIONS
Features:
Power over Ethernet (PoE) 802.3af compatible
Compatible with most modern IP Telephone
systems
Call buttons calls a SIP address or any Valcom
Gateway
Automatic Talkback VOX operation (no Push To
Talk button needed)
Easy, RJ-45 plug in, Cat 5 or 6, LAN /WAN
10/100
SIP or Multicast addressable
All Call thousands of units with Valcom
Gateway
Red LED status indicator
Brushed stainless steel faceplate
Auxiliary relay (strobe or camera activation)
Compatible with secure networks
Supervision with alert functions
Web-based firmware upgradeable
Web Interface For Control And Setup DHCP
High Survivability –No Server Needed
Vandal Resistant and Tamper-Proof Hardware
Speaker
3.5" dia.
Mounting
Surface Mount
Speaker Output
100dB @ 4' on-axis
Switches
Single Pole Momentary Contact
Power
Extend: 24 VDC @ 325 ma
POE: 802.3af, class 3
Auxiliary Relay
Form C Contact
Contact Rating: 24VDC 2Amp
Networking
10/100 Mbps Ethernet port
Manual or Dynamic Host Configuration Protocol
(DHCP) IP address setup.
Time and date synchronization using SNTP
Protocols
IETF SIP (RFC3261)
IETF IGMP version 3 (RFC3376)
IETF RTP (RFC1889)
IETF RFC2833
Digest Authentication
* Other protocols available upon request

2 947786
Enviroment
Suitable for Indoor/Outdoor Installations
Dimensions and Weight
14.62” H x 9.87” W x 5.07” D
37.2 cm x 25.1 cm x 12.9 cm)
Shipping Weight: 5 lb. (1.9 kg)
Finish
The VE9894 is available with the following
enclosure finishes:
(-Y) Safety Yellow with stainless steel faceplate
(-B) Safety Blue with stainless steel faceplate
(-G) Light Gray with stainless steel faceplate
(-SS) Stainless Steel with stainless steel faceplate
INSTALLATION
1. Remove phone faceplate retaining screws.
2. Mount backbox using appropriate hardware.
3. Connect RJ-45 connector from network to jack
mounted on Printed Circuit Board. Power over
Ethernet (PoE) is required. If PoE is not
available, a power injector will be required.
4. Using the enclosed security hex driver and
security screws install phone faceplate onto
enclosure.
5. Program the VE9894 using the VIP-102-B
IP solutions setup tool.
TECHNICAL ASSISTANCE
Assistance in troubleshooting is available from the
factory. Call [phone] and press 1 for
Technical Support or visit our website at
http://www.valcom.com
Valcom, Inc. equipment is not field repairable.
Valcom maintains service facilities in Roanoke, VA.
Should repairs be necessary, attach a tag to the
unit clearly stating company name, address, phone
number, contact person, and the nature of the
problem.
Send the unit to:
Valcom, Inc.
Repair and Return Dept.
5614 Hollins Road
Roanoke, VA 24019-5056
V
ALCOM LIMITED WARRANTY
Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship
under conditions of normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be
limited to the replacement, repair or refund of any such defective device within the warranty period, provided that:
1. inspection by Valcom, Inc. indicates the validity of the claim;
2. the defect is not the result of damage, misuse or negligence after the original shipment;
3. the product has not been altered in any way or repaired by others and that factory sealed units are unopened (a service charge plus
parts
and labor will be applied to units defaced or physically damaged);
4. freight charges for the return of products to Valcom are prepaid;
5. all units 'out of warranty' are subject to a service charge. The service charge will cover minor repairs (major repairs will be subject to
additional charges for parts and labor).
This Limited Warranty is in lieu of and excludes all other warranties, expressed or implied and in no event shall Valcom, Inc. be
liable for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with
the purchase, operation, maintenance, installation, removal or use of the product. The maximum liability of Valcom under this
warranty is limited to the purchase price of the specific Product covered by the warranty.
Disclaimer. Except for the Limited Warranty provided herein, the product is provided “as-is” without any warranty of any kind whatsoever
including, without limitation, any WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-
INFRINGEMENT.
This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier
should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.
Headquarters:
Valcom, Inc.
5614 Hollins Road Roanoke, VA 24019-5056
Phone: [phone] FAX: [phone]