Valor Fitness BD-7 User manual

D
VA09062015
Power Rack
with Lat Pull
BD-7
Owner's Manual

PLEASE DO NOT RETURN PRODUCT TO STORE, CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT [phone].
SAFETY & PRECAUTIONS
13.
RETAIN OWNER'S MANUAL FOR FUTURE REFERENCE.
departments, high schools, etc.. Commercial use would include, but not limited too,locations that accept
THIS PRODUCT.
IMPORTANT: READ ALL PRECAUTIONS CAREFULLY BEFORE USING
727-895-9525.
information in a safe secure place in your home or office.
you feel there's no need to return product. Place the manual and warranty
: This item is shipped in an unusual shaped box. Please hold on to box until Note
as a location with multiple users but not in a membership setting. Examples would be hotels, fire
• only. Light commercial can be defined
home use
or
light commercial
This product has been designed for
direction.
you would like further clarification during your assembly process please feel free to contact Valor Athletics for
diagrams at time of production. Changes of such will not affect the performance or assembly of the unit. If
• Additional features on products may be added during seasonal production but may not be featured in line art
In the event should you find this product has either a defective or a missing part, do not use substitute parts •
or try to use the unit in an incomplete form. Please contact Valor Athletics Inc. for a replacement.
apply whenever you operate a piece of exercise equipment. Please note the following safety procedures:
• This exercise equipment was designed and built for optimum safety. However certain operator precautions
membership for use of equipment.
Keep children and pets away from this equipment.1.
Always inspect equipment prior to use to assure the structual integrity. Some parts may need occasional 2.
maintenance due to wear and tear.
Lubricate moving parts as needed(depends on use but once a month is a good rule to follow)3.
One person at a time should use this equipment unless otherwise designed for safety(example:spotter 4.
stand on some weight benches)
If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced while using this 5.
equipment, stop the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.
Always use this equipment on a level surface. Do not use outdoors or near water.6.
Keep hands and feet away from any moving parts that are not intended to have body parts near them while 7.
in use.
Do not insert any object into any openings unless object is supposed to be inserted into a particular 8.
place(such as a pin in a weight stack)
Before using this equipment, always do stretching exercise to warm up.9.
Use this equipment only for its intended use as described in manual.10.
Always wear appropriate workout clothing and shoes when exercising. DO NOT WEAR ROBES OR 11.
OTHER CLOTHING THAT COULD BECOME CAUGHT IN THE EQUIPMENT.
BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHISICIAN.12.
DO NOT RETURN PRODUCT TO STORE, CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT
To sum up the above: Be smart. Be safe.
2

M10 nut 10 washer
No. Description Code Q'ty
1 M10 x 70 bolt 10300059 16
2 M10 x 65 bolt 10300058 21
3 M10 x 45 bolt 10300053 3
4 M10 x 20 bolt 10300048 5
5 M10 nut 10300167 40
6 10 washer 10300188 85
7 16 pulley sleeve 10400062 6
8 8 x 35 locking bolt 10403002 1
Attached to Header Card•
PARTS LIST
BD-7 Power Rack with Lat Pull
M10 x 70 bolt
M10 x 65 bolt
M10 x 45 bolt
16 pulley sleeve
M10 x 20 bolt
3
www.ValorFitness.com
Phone: [phone] Fax: [phone] E-mail: [email protected]
May not be printed on a 1:1 Ratio
How to Measure:
10mm or 0.40"
6"5"4"3"2"1"0
16 cm1514131211109876543210
8 x 35 locking bolt
M10 x 70 bolt
70mm or 2.75"
M10 nut
10 mm

BD-7 Power Rack with Lat Pull
PARTS LIST
Attached to the Frame•No. Description Code Q'ty
10 26-50-6 buffer washer 10400184 2
11 25 spring clip 10400005 2
12 25 handle 10400088 4
13 6050 tube bushing 10400054 2
14 50 foot cover 10400045 5
15 50 tube plug 10400024 6
16 25 tube plug 10400032 7
17 25tube cover 10400601 1
Packed in the box•
15
17
Pulley
10400014
qty 6
18
Chain
10405019
qty 1
19
Gourd Buckle
10400009
qty 5
20
Foam Roller
23-90-400
10400083
qty 1
42
Cables
3080mm (122")
qty 2
same size
21
16
26-50-6 buffer washer
10400184
qty 4
10
13
4
PLEASE DO NOT RETURN PRODUCT TO STORE. CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT [phone].
www.ValorFitness.com
Phone: [phone] Fax: [phone] E-mail: [email protected]
Cable
Assembly
Instructions
can be found
on page
#11
10 11 14
12

34 Lower beam
11660110
qty 1
40 Foam roller bar support
11660170
qty 1
Phone: [phone] Fax: [phone] E-mail: [email protected]
11660190
•
PARTS LIST
qty 4
BD-7 Power Rack with Lat Pull
Packed in the box
5
23
qty 2
11660010
Front upright frame
24
qty 2
11660180
Rear upright frame
25
qty 1
11660100
Lat pull shart
27
qty 2
11660030
Upper cross frame
28
qty 1
11660060
Chrome pull up bar 29
qty 2
11660040
Rear cross beam
30
qty 2
11660070
Longer safety bar 31
qty 2
11660070
Short safety bar
33
qty 1
11660090
Top beam 35
qty 1
11660120
Plate carriage 36
qty 2
11931100
Pulley brace
38
qty 1
11660150
Low T bar 39
qty 1
11660160
Clamping plate 41 Plate stroage Pegs
www.ValorFitness.com
PLEASE DO NOT RETURN PRODUCT TO STORE. CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT [phone].
26 Bottom base frame
11660020
qty 2
37 Lat bar
11660140
qty 1

[email protected]
Locate Prats #26 Bottom Base Frame ( qty 2) and attach them to the Rear Cross Beam #29.
Go ahead and tighten the nuts and bolts securely.
BD-7 Assembly Instructions
main frame parts. If you have any questions during the process, please call 727-895-9525 or e-mail
also leave out some items that can be assembled by visual. Some parts may be already attached to
PLEASE DO NOT RETURN PRODUCT TO STORE. CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT [phone].
6
Valor Fitness
( the goal here is to establish a solid structure to work from)Step #1: Main Frame
Note: The following step by step is a guide to walk you through what may be the best way to proceed.
The Assembly Instructions will guide you through the critical parts to assemble in sequence but may
www.ValorFitness.com
Phone: [phone] Fax: [phone] E-mail: [email protected]
26
26
29
5
14
1
1
5
6

526
2
15
24
26 5
24
6
2
2
2
23
27
6
2
2
27 5
23
2
2
5
BD-7 Assembly Instructions
Valor Fitness
PLEASE DO NOT RETURN PRODUCT TO STORE. CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT [phone].
2. The Rear Upright Beams with the holes of plate storages, so need to place
the bigger holes outside.
Phone: [phone] Fax: [phone] E-mail: [email protected]
Step #2: Uprights
Locate the four Upright Frames ( #23 Front Upright Frames, qty 2 ) and ( #24 Rear Upright
Frames, qty 2 ). Attach the two Upper cross beams #27 on both side.
Go ahead and tighten the nuts and bolt securely.
Note: 1. Make sure you put the bolts in the direction so the open threads will end up
on the outside of the frame.
www.ValorFitness.com
7

10
41
4
28 29
10
5
6
1
1
41
1
4
1
16
5
Number stick
Attach the four Plate Storages (#41) to the two Rear Upright Frames (#24).
PLEASE DO NOT RETURN PRODUCT TO STORE. CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT [phone].
Phone: [phone] Fax: [phone] E-mail: [email protected]
BD-7 Assembly Instructions
Go ahead and tighten the nuts and bolts securely.
Valor Fitness
Step #3 : Top Frame
Attach the two top cross beams to secure both sides. This will be the Rear Cross
Beam ( #29) and the front Chrome Pull Up Bar （#28）.
www.ValorFitness.com
8

www.ValorFitness.com
BD-7 Assembly Instructions
Valor Fitness
PLEASE DO NOT RETURN PRODUCT TO STORE. CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT [phone].
Phone: [phone] Fax: [phone] E-mail: [email protected]
Step #4: Lat Pull Section
Attach the Lower Beam #34 to the lower Rear Cross Beam #29. Attach part #251. Chrome Lat Pull Shaft to the part #34. Slide the Plate Carriage #35 over the top of
the Chrome Beam and lower it to the bottom. Note: Make sure you face this the
correct way. See diagram for visual.
Attach the Top Beam #33 to both the Chrome Lat Pull Shaft #25 and the upper Rear2. Cross Beam #29.
11
5
10
1
2
2
14
29341
29
5
25
15
5
6
17
33
13
35
15
16
9

www.ValorFitness.com
Valor Fitness
BD-7 Assembly Instructions
PLEASE DO NOT RETURN PRODUCT TO STORE. CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT [phone].
Step #5: Pulley and Cables
Phone: [phone] Fax: [phone] E-mail: [email protected]
place on the top cable. Gravity will hold the brace in place while you thread the lower cable.
Start with the top cable frist. Once you have this in place, attach the Pulley Brace #36 in
10
18
1
1
7
3
12
12
20
20
18
3
19
21
21
7
18 38
3
51
37
5
20
7
6

PLEASE DO NOT RETURN PRODUCT TO STORE. CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT [phone].
BD-7 Assembly Instructions
Cable Assembly
Phone: [phone] Fax: [phone] E-mail: [email protected]
Valor Fitness
www.ValorFitness.com
3450 Morris Street North, St. Petersburg, Florida 33713
11
Start
Stop
Start
Stop

PLEASE DO NOT RETURN PRODUCT TO STORE. CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT [phone].
Valor Fitness
BD-7 Assembly Instructions
Phone: [phone] Fax: [phone] E-mail: [email protected]
Step #6: Safety Bar and other
www.ValorFitness.com
12
31
8
30
42
40
4
30
6

[email protected]
Phone: [phone] Fax: [phone] E-mail: [email protected]
Valor Fitness
BD-7 Assembly Instructions
Jim Vanderbleek
President, Valor Fitness
From this point forward, if there are any plastic parts that were not attached at the factory, then
locate the part on the diagram and where it will be placed on the unit. Please call 727-895-9525
if you have any questions or if you come across a difficult section during the assembly process.
If you would like to rate our Assembly Instructions once you are finished, the please send your
comments to myself at
Rating:
A = Very well done.
B = Pretty Good.
C = Fair.
D = Seriously.
F = Find Another Occupation.
Thanks,
www.ValorFitness.com
PLEASE DO NOT RETURN PRODUCT TO STORE. CALL OUR CUSTOMER SERVICE DEPARTMENT FIRST AT [phone].