Vantech VP-440HD Original operating instructions

Quick Installation
Instructions for DVR

1.HDD Installation
1. Ensure Power supply has been disconnected, open the case cover;
2. Connect HDD data line, power line first , then fix the HDD in the case;
3. Install the cover, connect the power, which with adaptor, press the power switch;
4. Formatting the HDD (Please check details from : System Setup—Peripheral—Storage
Device—Formatting );
5. DVR can normally make snapshot and video.
1.Device Connection
After HDD installation,connect the Device as follows:
2.Login
After the Devices connected,Press the power button ,then the DVR
booting,Enter the usename and password login the system. The defult username is”
admin”,password is “”.

3.Remote Connection with CMS
1.Open CMS,in the login interface,select “Device ID Login”,Enter the Device
ID,Click Advanced button,Enter the network username and password, Click Login
button,then can login successful and connected the DVR Device.

4.Remote Connection with IE
1.Open IE with Http://www.nvsip.com ,select “Device ID”,Enter the Device
ID,and the network username and password,Click the [Login] button,then can
login the IE system and connected the DVR Device.

5.Remote Connection with Mobile Phone
1.Download the APP and install it ,after installation,register a user,the login
with this user.

2.After Login,Click the button ,Add Device,Enter the Device ID and
network username and password.
2.Click [Save] button,then Add this Deviec successful.

3.Click this Device,select one channel,can connect the Device,if you want to
see other channels,you can sliding aroud the picture.