Varjo XR-3 User manual

User guide

User guide
Benutzerhandbuch
Mode d'emploi
Guía del usuario
Manuale d'uso
Käyttöohje
Användarguide
ユーザーガイド
사용자 설명서
ךירדמשמתשמל
EN
DE
FR
ES
IT
FI
SV
JP
KO
ת י ר ב ע

4
NEN
In the box
XR-3
mixed reality headset
2 headset adapters 2 power supply units
6 power plugs, 2 of each
EURO UK US AUS KOR CHN
Cleaning cloth Varjo reference marker

5
EN
VR-3
virtual reality headset
2 headset adapters 2 power supply units
6 power plugs, 2 of each
EURO UK US AUS KOR CHN
Cleaning cloth

6
USB-C
USB-C
DisplayPort
USB-A 3.0 / 3.1
NEN
Connect the headset
Varjo headsets are compatible with Windows 10 computers.
1. and : Connect each headset cable to a headset adapter.
2. Headset adapters: Connect each adapter to a DisplayPort port on the graphics card and to a
USB-A 3.0
/ 3.1 port on the motherboard.
For more detailed system requirements, see
varjo.com/start/system .

7
Download Varjo Base
EN
Varjo Base is the software used to run your headset on a Windows 10 computer.
Download Varjo Base to get started.
1. Go to varjo.com/start .
2. Create a Varjo Account.
3. Download and start Varjo Base.
4. Follow the setup instructions.
You will need a valid subscription to use your headset.
Read more at varjo.com/subscriptions .

8
NEN
Put on the headset
To put on the headset, place the front of the headset on your face and pull the headband over the
back of your head. You can wear most single-vision eyeglasses while using the headset.
Adjust the fit and comfort of the headset when you put it on:
: Rotate the back adjustment wheel to tighten the headband.
: Rotate the front adjustment wheel to move the headset up or down on your head. Support the
headset body with one hand while adjusting.
and : Use the side knobs to adjust how the headset fits around your face.
The headset is correctly adjusted when it sits comfortably on your head and the image inside the
headset is sharp.

9
Using the headset
EN
Action button: interact with your
applications
Menu button: open the Menu
LED status light
Headphone connector
LED pattern Headset status
White (blinking) Starting up
Green (solid) Working normally
Green (pulsing) Idle
Green (blinking) Shutting down
Orange (solid) Varjo Base not running

10
NEN
Cleaning the headset
Clean the headset regularly, especially when sharing a headset with others.
Headset lenses: clean gently with optical lens wipes or a microfiber lens cloth.
Headset body, cushions, nose area, and areas surrounding the lenses: clean with non-abrasive
antibacterial wipes.
You can purchase additional cushions from Varjo Store.

11
Using the Varjo reference marker
EN
Use the Varjo reference marker to improve the accuracy of Varjo inside-out tracking.
Varjo inside-out tracking is available for the Varjo XR-3 mixed reality headset.
For more information, visit
varjo.com/start/get-to-know-your-headset .

12
NEN
Product and safety
Safe environment
information
Intended use
The headset is intended to be used indoors and by adults only. If
you do not use the headset as intended, it may cause the headset to
malfunction.
High-risk use
Varjo software and/or products are not designed, engineered, or
certified for control of any equipment or system, including aviation,
industrial, commercial, military, or medical equipment or systems, in
a way where such use or a malfunction of the software or products
could with a meaningful probability lead to death or serious bodily
injury of any person or animal, or to severe physical or environmental
damage (“high-risk use”). VARJO STRONGLY ADVISES AGAINST
USING THE SOFTWARE OR PRODUCTS FOR ANY HIGH-RISK USE. If
you still decide to use the software and/or products for high-risk use,
you do so at your own risk, assume all liability, and agree to take all
reasonable precautions to minimize any risk and damage resulting
from such high-risk use and/or failure of software and/or products in
such high-risk use.
Product type label
The model name and serial number of the headset are printed on the
type label located on the back support of the headband.
Health and safety warnings
To reduce the risk of personal injury, discomfort, or property damage,
please ensure that all users of the headset carefully read the
warnings below before using the headset.
Before using the headset
A comfortable mixed or virtual reality experience requires an
unimpaired sense of motion and balance. Do not use the headset if
you are sick, tired, sleepy, under the influence of alcohol or drugs,
hungover, experiencing digestive problems, under emotional stress
or anxiety, suffering from cold, flu, migraines, or headaches, or are
not generally feeling well, as it may worsen your condition. Consult
a doctor before using the headset if you have any conditions that
impair your vision or mobility, are pregnant or elderly, have a heart or
other serious medical condition, or suffer from seizures, migraines,
or psychiatric conditions.
Varjo headsets produce an immersive mixed or virtual reality
experience that may distract you and make it hard to see your actual
surroundings.
Remember that any virtual objects that you see do not exist in the
real environment, and their size and location are not real. Do not
attempt to sit or stand on virtual objects or use them for support.
Be aware of any real-world objects that might be located behind
virtual objects.

Never use the headset in situations that require attention, such as
while walking, bicycling, or driving. Do not use the headset while in
a moving vehicle.

Remember that while you are using the headset, you may be
unaware of people entering the area.

Before using the headset, clear the area of obstacles and hazards,
people, furniture, and any other items that may prevent you from
moving freely. Also, check that you have enough space above
and around you so that you can extend your arms while using the
headset.

Do not use the headset near walls, stairs, balconies, windows,
open doorways, low ceilings, ceiling fans, light fixtures, breakable
items, open flames, heat sources, or any other items that you can
collide with or knock down.

Keep in mind the location of the cables and power cords so that
you do not walk on, trip over, or pull on them while using the
headset. Do not jerk, knot, or bend the cables or cords.

Do not handle sharp or otherwise dangerous objects while using
the headset.
Discomfort
When using the headset, some people may experience dry eyes,
eye strain, eye or muscle twitching, involuntary movements, altered,
blurred or double vision, or other visual abnormalities, dizziness,
light headedness, disorientation, discomfort or pain in the head or
eyes, headaches, impaired balance, impaired hand-eye coordination,
excessive sweating, increased salivation, nausea, fatigue, loss of
awareness, or seizures and other symptoms of motion sickness.
When you start to use the headset, keep your first sessions short
and take regular breaks. If you feel discomfort, stop using the
headset and continue only after the symptoms have ended. Do not
drive, operate machinery, or engage in other visually or physically
demanding activities until you have fully recovered from any
symptoms. Consider consulting a doctor if you are not able to see
virtual objects clearly and comfortably.

13
Overuse
Take regular breaks when using the headset. Prolonged use may
impact your hand-eye coordination or balance and may cause other
negative effects.
Repetitive stress injuries
Use the headset in a comfortable position. Do not use excessive
force when gripping the headset or pressing the headset buttons. If
you experience tingling, numbness, burning, stiffness, throbbing, or
other discomfort, stop using the headset and rest until you have fully
recovered from any symptoms. If you continue to experience these
symptoms, consult a doctor.
Interference with medical devices
The headset may emit radio waves, which can affect the operation
of nearby electronics, including cardiac pacemakers, hearing aids,
and defibrillators. If you use a pacemaker or other implanted medical
device, do not use the headset without first consulting a doctor or
the manufacturer of your medical device. Maintain a safe distance
between the headset and your medical devices and stop using the
headset if you observe any interference with your medical device.
Hearing loss
Excessive exposure to loud sounds can cause hearing damage. When
using headphones with the headset, start with the volume at a low
level and increase the volume slowly if needed. Do not turn up the
volume too high.
Seizures
Some people may experience severe dizziness, fainting, epileptic
seizures, or blackouts triggered by light flashes, patterns, or exposure
to infrared light sources of an eye tracker even though they have no
history of these conditions. If you experience any of these symptoms,
stop using the headset and consult a doctor. If you have a previous
history with these symptoms, consult a doctor before using the
headset. To reduce the likelihood of a seizure, do not use the headset
if you are tired.
No eye protection
Varjo headsets do not provide eye protection against impact, debris,
chemicals, UV light, other harmful lights, particles, projectiles, or
other physical hazards.
Electrical shock EN
Do not try to disassemble, open, service, or modify the headset
or power supply unit, as this can lead to electrical shock or other
hazards and may damage the headset or the power supply unit. For
PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near
the equipment and shall be easily accessible. Use the headset only
with the power supply unit (Adapter Technology Co., Ltd. (ATS036T-
W120V(Level VI)) INPUT Universal 100 ~ 240 Vac / 50 ~ 60 Hz, 1A,
OUTPUT +12V / 0~3A and headset adapter included in the sales box.
Using other power supply units may be dangerous.
CLASS 1 LASER PRODUCT
(Applicable only to the Varjo XR-3 mixed reality headset)
Damaged or broken device
Do not use the headset if any part is broken or damaged, the
provided cables are torn, or any wires are exposed. Do not try to
repair any part of the headset yourself. Repairs should be made only
by an authorized service facility or Varjo.
Contagious conditions
To avoid the risk of transferring contagious conditions from one
person to another, do not share the headset with persons with
infections or diseases, particularly of the eyes, skin, or scalp.
Skin irritation
Stop using the headset if you experience swelling, itchiness, or other
irritation. If the symptoms persist, consult a doctor.
Safety information
To prevent injury to yourself or others or damage to the headset, read
this safety information before using the headset.
Wearing the headset
When you put on the headset for the first time, follow the instructions
on how to position the headset correctly on your head. The headset
is correctly adjusted when it sits comfortably on your head and
the image inside the headset is sharp. There should be no pain or
pressure on your head, and the cushion should feel comfortable on
your face.

14
NEN
When you put on the headset, it will adjust the lenses automatically
or aerosols. Never use water to clean the headset. Clean the headset
based on your interpupillary distance. This setting is on by default.
We recommend that you keep the setting on. Switch off the setting if
the automatic adjustment does not work for you, for example due to
eyeglasses, sensitivity to infrared light, or any conditions that impair
your vision. If you switch off the automatic adjustment, you may feel
discomfort when using the headset.
Lighting
Use the headset in a well-lit environment to get the maximum
performance from the cameras on the headset. Please be aware that
reflective surfaces may interfere with positional tracking.
Care and maintenance
Handle the headset with care and keep it in a clean and dust-free
place.
Sunlight and external light sources
Do not leave the headset in direct sunlight or strong ultraviolet light.
Exposure to direct sunlight can damage the optics and display. Do
not shine a laser or an external light source through the lenses.
Damage
 Do not drop or bend the headset or knock it against other objects,
as this may affect the calibration of the camera lenses.

Do not scratch the camera lenses.

Lift the headset by holding the headset body or the headband.

Do not lift the headset by holding the cushions or cables.

Do not step on the cables.
Damage requiring service
Use only qualified personnel to service the headset. Contact an
authorized service facility if:

The headset has been exposed to liquid or dropped.

The headset has been subjected to impact or is damaged.

The headset overheats.

The headset does not operate normally when you follow the
operating instructions.
Cleaning
Unplug the headset from its power source before cleaning. Clean
the headset body with non-abrasive anti-bacterial wipes. Do not use
soap, harsh chemicals, alcohol, cleaning solvents, liquid cleansers,
lenses and front plate gently with optical lens wipes or a microfiber
lens cloth. Do not clean the lenses with any liquid or chemical
cleansers. Clean the cushions with non-abrasive anti-bacterial wipes.
Device temperature
It is normal for the headset to feel warm to the touch while in use.
The front-facing cameras and air ventilation surfaces in particular
may get hot. Prolonged skin contact with a headset that is hot to
the touch may cause skin discomfort or redness, or low temperature
burns. If your headset feels hot to the touch or is uncomfortably
warm, stop using it and allow the headset to cool down.
Accessories
Do not use the headset with any unauthorized or incompatible
accessories or software. Using unauthorized accessories or software
may cause performance issues or result in injury or damage. Check
varjo.com/support for a list of compatible accessories or software.
Operating and storage
environment
Placement
Use the headsets only in adequately ventilated areas.
Do not cover the headset.

Do not cover the ventilation holes on top or at the bottom of the
headset.

Do not place the headset near objects that could scratch the
lenses.

Do not expose the headset to open flames or lit smoking products.

Do not place the headset near heat sources, hot areas, or extreme
temperatures.
Do not use the headset near water or other liquids.

Do not use the headset after a dramatic change in temperature.
When you move the headset between environments with very
different temperatures and/or humidity ranges, condensation may
form on or inside the headset. Allow enough time for the moisture
to evaporate before using the headset.
Note: When you move the headset from low-temperature conditions
into a warmer environment or vice versa, allow the headset to
acclimate to room temperature before you turn it on. Use the headset
at temperatures between 10°C to 27°C (50° to 80°F). Store the
headset in its sales box at temperatures between 0°C to 40°C (32°F
to 104°F) to minimize unintentional damage.

15
Radio frequencies
This Class A digital apparatus complies with the Canadian standard
EN
ICES-003.
Recycling
The Directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE), which entered into force on 13th February 2003,
resulted in a major change in the treatment of electrical equipment
at end-of-life. Check the local regulations for proper disposal of
electronic products.
The crossed-out wheelie bin symbol on your headset, battery,
reading materials, or packaging reminds you to take all
electrical and electronic products, batteries, and used
packaging materials to separate collection at the end of their
working life. Do not dispose of these products as unsorted municipal
waste; take them for recycling. For info on your nearest recycling
point, check with your local waste authority.
European Union notice
Hereby, Varjo declares that the HS-5 and HS-6 headsets are in
compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet
address: varjo.com/compliance.
Note: This equipment has been tested and found to comply with the
limits for Criterion C.
A direct ESD discharge of +/- 500V or more to the camera assembly
can result in reduced functionality. The camera system may need to
be restarted to restore full functionality.
FCC and ISED Information to the user
Note: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference, in which
case the user will be required to correct the interference at their own
expense.
California Proposition 65
WARNING: Cancer - www.P65Warnings.ca.gov .
FCC and ISED Compliance statement
This device complies with part 15 of the FCC Rules and to RSS-247 of
Innovation, Science and Economic Development Canada. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation. Changes or modifications not expressly
approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
FCC and ISED Radiation Exposure statement
This equipment complies with FCC and Canadian radiation exposure
limits set forth for an uncontrolled environment. These transmitters
must not be co-located or operating in conjunction with any other
antenna or transmitter.
RoHS compliance
This equipment is in compliance with Directive 2011/65/EU of the
European Parliament and of the Council of 8 June 2011, on the
restriction of the use of certain hazardous substances in electrical
and electronic equipment (RoHS) and its amendments.
Japanese Radio Law Compliance
This device is granted pursuant to the Japanese Radio Law ( 電波法 )
This device should not be modified (otherwise the granted
designation number will become invalid)
Component Rating Frequency Peak Output Power
Headset 12V, 3A 2.402–2.48 GHz 1 mW

16
NEN
which is nearest to the original model. Varjo or its service partner will
Varjo Limited Business Warranty
VARJO PRODUCT IS INTENDED FOR BUSINESS USE AND IS NOT
INTENDED TO BE SOLD TO CONSUMERS. THIS LIMITED BUSINESS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY
ALSO HAVE OTHER LEGAL RIGHTS WHICH VARY FROM STATE TO
STATE AND COUNTRY TO COUNTRY.
1. Definitions
The following definitions apply to this Limited Warranty:

“Varjo Product” means the Varjo headset and any accessories
provided in the box at the time of the original purchase from an
authorized retailer or Varjo (“Authorized Retailer”).
“You” and “Your” refer to the original business user who bought the
Varjo Product from an Authorized Retailer.
“Warranty Period” is twelve (12) months from the date You
purchased the Varjo Product from an Authorized Retailer.

“Normal Use Conditions” means ordinary business use in
accordance with the User Manual.

“User Manual” means any and all use instructions, safety guidance
and other documentation provided in the box or posted online by
Varjo.
2. Coverage
Varjo warrants, exclusively to You, that during the Warranty Period the
Varjo Product will function substantially in accordance with Varjo’s
technical specifications under Normal Use Conditions. This Limited
Warranty does not cover any software or other products required
to use the Varjo Product which are not in the box at the time of the
original purchase of the Varjo Product. Such products are subject to
their own use or other terms, even if intended or labelled to be used
together with the Varjo Product.
This Limited Warranty is valid and enforceable only if You purchased
the new Varjo Product from an Authorized Retailer and the Varjo
Product was sold to You in its original, sealed packaging. You may
not assign or transfer this Limited Warranty to any third party, unless
such restriction is prohibited by mandatory law.
If You return the Varjo Product during the Warranty Period and it
satisfies the terms of this Limited Warranty, Varjo or its service
partner will, at its sole discretion, repair or replace it.
Repair or replacement may involve the use of a functionally
equivalent reconditioned Varjo Product and/or reconditioned parts,
unless prohibited by law. When replacing the Varjo Product, Varjo
may replace it with either the same model, or if not available, a model
at its own expense return the repaired or replacement Varjo Product
to You. Any Varjo Product that You send to Varjo and that is replaced
by Varjo becomes the property of Varjo.
If Varjo repairs or replaces the Varjo Product, the repaired or replaced
Varjo Product shall continue to be warranted for the remaining time
of the original Warranty Period or for three (3) months from the date
of the repair or replacement, whichever is longer.
Repair or replacement of the Varjo Product is Your sole and exclusive
remedy and Varjo’s sole obligation for any claims whatsoever or
any losses resulting from the failure of the Varjo Product. If we
determine, in our sole discretion, that none of the listed means is
reasonable to fix the defect or malfunction, then we may refund to
You the price You paid to purchase the Product.
This Limited Warranty is the final, complete and exclusive warranty
offered by Varjo regarding the Varjo Product, and no other person or
entity (including the Authorized Reseller) is authorized to make any
other warranties or representations on behalf of Varjo. EXCEPT FOR
THE EXPRESS LIMITED WARRANTIES PROVIDED IN THIS LIMITED
WARRANTY, VARJO DISCLAIMS ALL OTHER EXPRESS AND IMPLIED
WARRANTIES AND REPRESENTATIONS OF ANY KIND, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY, AND FITNESS
FOR A PARTICULAR PURPOSE. EXCEPT OTHERWISE PROVIDED IN
THIS LIMITED WARRANTY, ALL VARJO PRODUCTS ARE PROVIDED
“AS IS” AND “WITH ALL FAULTS”. If and to the extent that an implied
warranty cannot be disclaimed, its duration is limited to the Warranty
Period. If the mandatory law applicable to You does not allow
limitations on how long an implied warranty lasts, this limitation may
not apply to You.
In case you are not the original purchaser of the Varjo Product,
this Limited Warranty does not apply to you. If the Warranty Period
has expired, if the Varjo Product does not fulfill the conditions of
this Limited Warranty or if You fail to make Your warranty claim in
accordance with Section 5, this Limited Warranty does not apply.
In case this Limited Warranty does not apply, Varjo may offer You
out-of-warranty services against a fee and You may be responsible
for any expenses related to the repair or replacement of Your Varjo
Product.
3. How Can You Get Service?
If You have a problem with Your Varjo Product, please visit us at
varjo.com/support to get assistance and contact information and
to submit a claim form to obtain warranty service. If it is necessary
for You to send Your Varjo Product in for service, we will provide
You instructions on how to do this. You may be required to pay the

17
cost of shipping the Varjo Product to us. When we receive the Varjo
Product, we will determine if there is a defect or malfunction covered
by this Limited Warranty. If we find a defect or malfunction covered
by this Limited Warranty, we will repair or replace the Varjo Product
to provide You a Varjo Product that is substantially in accordance
with Varjo’s technical specifications under Normal Use Conditions
and we will send the repaired Varjo Product or a replacement Varjo
Product, if any, to You at our cost. We may not return the original
Varjo Product to You. If You send us a Varjo Product without a valid
proof of purchase, we will return the Varjo Product to You at Your
cost, subject to prepayment, or, if such costs are not prepaid, we
will keep the Varjo Product thirty (30) days waiting for Your pick-up
before it is disposed of.
4. What is not covered?
This Limited Warranty does not cover and Varjo is not responsible for
(i)
used or resold Varjo Products; (ii) Varjo Products not purchased
from Authorized Retailers; or (iii) any software (including but not
limited to any software on the Varjo product and any PC software
provided by Varjo).
Furthermore, this Limited Warranty does not cover and Varjo is not
responsible for damage to the Varjo Productor loss of the Varjo
Product or resulting from (i) an accident (e.g. accidental physical
impact, exposure to liquid, food or other contaminants, etc.) or theft;
(ii)
use not in accordance with Normal Use Conditions or any other
misuse (including but not limited to neglect, abuse or alteration); (iii)
use with an unsuitable product not sold or licensed by Varjo; (iv) use
with inadequate ventilation; (v) use by children; (vi) circumvention of
our security mechanisms; (vii) reverse engineering; (viii) defects or
damage from viruses or other software problems introduced into the
Varjo Product; (ix) use of the Varjo Product in violation of any laws,
regulations or ordinances in effect where the Varjo Product is used;
(x) defects or damage caused by unauthorized repairs; (xi) Acts of
God, including but not limited to lightning, flood, tornado, earthquake
or hurricane; and/or (xii) cosmetic damages (e.g. scratches).
Additionally, this Limited Warranty does not cover and Varjo is not
responsible for damage to the Varjo Product or loss of the Varjo
Product resulting from normal wear and tear and normal depletion of
consumable parts.
Finally, this Limited Warranty does not include any specific
guarantees that the Varjo Product will be error-free or regarding
uptime or continued availability, data security features of software
or online accounts, or that any software, firmware or online sites will
function uninterrupted or error-free. This Limited Warranty is void if
the Varjo Product is returned with removed, damaged or tampered
labels or any alterations (including the unauthorized removal of any
component or external cover). [This Limited Warranty does not cover
data loss; it is Your responsibility to back up Your data, electronically
or physically, on a regular basis if you wish to retain Your data. Any
damages or costs related to data recovery, removal and installation
are not recoverable under this Limited Warranty.]
5. Limitation of Liability
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
NEITHER VARJO NOR ITS SUPPLIERS SHALL BE RESPONSIBLE
FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, PUNITIVE
OR SPECIAL DAMAGES, INCLUDING BUT NOT LIMITED TO LOST
PROFITS OR COMMERCIAL LOSS, BUSINESS INTERRUPTION, LOSS
OF BUSINESS INFORMATION, LOSS OF DATA, LOSS OF PRIVACY,
LOSS OF CONFIDENTIALITY, COST OF ANY REPLACEMENT GOODS
OR SUBSTITUTE EQUIPMENT OR LOSS OF USE WHILE THE VARJO
PRODUCT IS BEING REPLACED OR REPAIRED. TO THE MAXIMUM
EXTENT PERMITTED BY APPLICABLE LAW, THE ENTIRE LIABILITY
OF VARJO AND ITS SUPPLIERS UNDER THIS LIMITED WARRANTY
SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU
FOR THE VARJO PRODUCT. THESE EXCLUSIONS APPLY EVEN IF A
REMEDY FAILS OF ITS ESSENTIAL PURPOSE OR VARJO HAS BEEN
ADVISED OF THE POSSIBILITY OF THESE DAMAGES, FOR ANY
CLAIM ARISING FROM OR RELATED TO THIS LIMITED WARRANTY,
REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT,
TORT (INCLUDING NEGLIGENCE), STRICT PRODUCT LIABILITY OR
ANY OTHER CAUSE OF ACTION OR LEGAL OR EQUITABLE THEORY.
Some states and countries do not allow the exclusion or limitation of
incidental or consequential damages, so limitations or exclusions in
this Limited Warranty may not apply to you.
No Varjo employee or representative or its affiliates or any third party
is authorized to make any modification, extension or addition to the
Limited Business Warranty or any part of these Terms.
6. General provisions
6.1 This Limited Warranty shall be subject to Finnish law, excluding
its choice of law provisions. The UN Convention on Contracts for the
International Sale of Goods shall not apply. Any dispute, controversy
or claim arising out of this Limited Warranty shall be finally settled
by arbitration in accordance with the Arbitration Rules of the Finland
Chamber of Commerce. Seat of arbitration shall be Helsinki. The
language of the arbitration shall be English.
6.2 If any provision of this Limited Warranty is found to be illegal,
invalid, or unenforceable under the laws of any jurisdiction, this will
not affect the legality, validity, or enforceability of any other provision
of the Limited Warranty.
E

18
Lieferumfang
NDE XR-3
Mixed-Reality-Headset
2 Headset-Adapter 2 Netzteile
6 Netzsteckeradapter (je 2 Stck.)
EURO UK US AUS KOR CHN
Reinigungstuch Varjo Referenzmarkierung

19
VR-3
DE
Virtual-Reality-Headset
2 Headset-Adapter 2 Netzteile
6 Netzsteckeradapter (je 2 Stck.)
EURO UK US AUS KOR CHN
Reinigungstuch

20
USB-C
USB-C
DisplayPort
USB-A 3.0 / 3.1
Anschließen des Headsets
Die Varjo Headsets sind mit Windows 10 kompatibel.
NDE
1. und : Verbinden Sie jedes Headset-Kabel mit einem Headset-Adapter.
2. Headset-Adapter: Verbinden Sie jeden Adapter mit einem DisplayPort der Grafikkarte und einem
USB-A 3.0/3.1-Port des Motherboards.
Weitere detaillierte Systemvoraussetzungen finden Sie unter:
varjo.com/start/system .

21
Herunterladen von Varjo Base
Varjo Base ist die Software, mit deren Hilfe das Headset auf einem Windows 10-Computer betrieben
wird. Laden Sie zunächst Varjo Base herunter. DE
1. Rufen Sie varjo.com/start auf.
2. Erstellen Sie ein Varjo Konto.
3. Laden Sie Varjo Base herunter und starten Sie die Anwendung.
4. Folgen Sie den weiteren Anleitungen.
Sie benötigen für die Verwendung des Headsets ein gültiges Abonnement.
Weitere Informationen hierzu unter: varjo.com/subscriptions .