VBC Racing Lightning10 User manual

COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT
1/10 SCALE ELECTRIC COMPETITION CAR KIT
E
INSTRUCTIONS MANUAL
5
Thank you for purchasing VBC Racing product.
This VBC Racing kit is a high performance, racing grade car kit
intended for experienced racers. The kit compose of VBC
formulated composite materials, top quality full carbon fiber
chassis and high grade 7075 material which will give you a
competitive edge over the others.
Novice racer should seek advice from more experienced racer
before assembly.
Always keep this instruction manual handy at all times for quick
reference even after completing the assembly.
Before your assembly, sand the chassis edges.
Things that we should remind you.
Sand the chassis edges with #600 sand paper and apply CA
glue to the edges and counter sink holes.
Need help or support.
If you need help or you would like to leave us a comment,
please email to our support team: [email protected] or
visit our web site www.vbcracing.com

BAG MARKED
STEP1
1
Graphite Edges Protection Procedure
01© VBC Racing LIGHTNING10
CA
Sand the chassis edges with #600 sand paper(not included) and
apply CA glue(not included) to the edges of the chassis.
Sand the below graphite edges with #600 sand paper and apply CA glue to the edges.
*Not included in this kit
A-01-P50205 Lightning10 2.5mm Graphite Main Chassis
A-01-P50210 Lightning10 Rear Tweak Plate
A-01-VBC-5083 Lightning12 Graphite Lower Pod Plate

BAG MARKED
02© VBC Racing LIGHTNING10
Pivot Brace D-05-VBC-0101 x 1
Pivot Brace Cover D-05-VBC-0101 x 1
Pivot Balls A-03-VBC-1027 x 5
M3x6 Flathead C-02-SC-F0306 x 5
Pivot ball shoulder should be facing downwards
Pivot Brace
Pivot Brace Cover
M2x6 Cap Head Use screws to adjust the
play of the piviot ball Movement. Do not
overtighten to avoid stripping
M2x6 Cap Head C-02-SC-R2.0x6 x 2
M3x6 Flathead
M3x6 Flathead
Pivot Balls
Pivot Balls
STEP2-5
02
2
Pivot Brace Assembly Part 1
M3x6 Flathead
M3x6 Flathead
Pivot Balls
Pivot Balls

BAG MARKED
03© VBC Racing LIGHTNING10
M3x10 Flathead C-02-SC-F0310 x 2
M2x6 Cap Head C-02-SC-R2.0x6 x 4
Pivot Brace Assembly Part2
STEP2-5
Lightning Pod Link Set
2
Rear Bulkhead Assembly Part1
3
M3 Locknut C-02-SC-NN03 x 2
Tighten each side screw
slowly, Make sure the lower pod
plate can rotate freely.
M3x6 Flathead C-02-SC-F0306 x 4
03
Note the direction screw in from
the larger hole side
M3x6 Flathead
LightningF Al7075 Motor Mount B-02-VBC-5128 x 1
LightningF Al7075 Left Bulkhead B-02-VBC-5129 x 1
LightningF Al7075 Left Bulkhead
LightningF Al7075 Motor Mount
03
M3x6 Flathead
M3x6 Flathead
M3x6 Flathead
M2x6 Cap Head
M2x6 Cap Head
M2x6 Cap Head
M2x6 Cap Head
M3x10 Flathead
M3x10 Flathead

04
© VBC Racing LIGHTNING10
Lightning10 Graphite Rear Pod Strut
A-01-P50206 x 1
M3x6 Flathead C-02-SC-F0306 x 2
BAG MARKED
STEP2-5
Chassis Brace Assembly
Rear Bulkhead Assembly Part2
3
M3x6 Roundhead C-02-SC-R0306 x 4
Lightning Rear Tweak Plate Standoff B-02-G50228 x 2
M3x6 Flathead
M3x6 Flathead
M3x6 Roundhead
M3x6 Roundhead
4
Lightning10 Graphite Rear Pod Strut
A-01-P50206 x 1
Lightning Rear Tweak Plate Standoff

BAG MARKED
STEP2-5
05
© VBC Racing LIGHTNING10
Side Spring (Medium/Gold) A-03-VBC-1047 x 2
4.7mm Ball Nuts B-02-VBC-5020 x 2
Aluminum Side Spring Retainer B-02-VBC-5074 x 2
M3x8 Set Screw C-02-SC-SS-0308 x 2
M3x6 Roundhead C-02-SC-R0306 x 4
4
4.7mm Ball Nuts
M3x6 Roundhead
Aluminum Side Spring Retainer
Side Spring (Medium/Gold)
M3x8 Set Screw
M3x6 Roundhead
05
M3x6 Roundhead
Thead Lock
Thead Lock
OPTIONAL SIDE SPRINGS SET :
Side Spring (Soft/Silver)
Side Spring (Medium/Gold)
Side Spring (Hard/Black)
(A-03-VBC-1047)
M3x8 Set Screw
4.7mm Ball Nuts
M3x6 Roundhead
Aluminum Side Spring Retainer
Side Spring (Medium/Gold)
STEP2-5
A-01-P50210
Lightning 10 Rear Tweak Plate

BAG MARKED
STEP2-5
06
© VBC Racing LIGHTNING10
Ball Connector 4.7x17mm A-02-VBC-5092 x 1
T2 7075 Spacer B-02-VBC-0019-20 x 2
T1 7075 Spacer B-02-VBC-0019-10 x 1
M3x6 Roundhead C-02-SC-R0306 x 4
4.7mm Ball Nuts B-02-VBC-5020 x 2
M3 Locknut C-02-SC-NN03 x 1
Lightning Damper Tube Shaft D-05-VBC-0103 x 2
Turnnuckle Cup (Short) A-03-VBC-5021 x 4
Lightning Damper Tube D-05-VBC-0103 x 2
Ball Connector 4.7x17mm
2mm Spacer
2mm Spacer
1mm Spacer
M3x6 Roundhead
4.7mm Ball Nuts
M3 Locknut
Lightning Damper Tube Shaft Set
Turnbuckle Cup (Short)
Turnbuckle Cup (Short)
Lightning10 Graphite Rear Shock Mount Plate
M3x6 Roundhead
M3x6 Roundhead
Friction Grease
5
MAKE TWO
06

BAG MARKED
STEP6
07
© VBC Racing LIGHTNING10
M2.5x4 Roundhead C-02-SC-R2504 x 4
Ball Connector 4.7x12mm A-02-VBC-5015 x 2
Lightning12 Front Axle B-02-VBC-5060 x 2
Pivot Ball B-02-VBC-5068 x 4
M3x15mm Turnbuckle, Black A-02-VBC-5053 x 2
Lightning12 Front Upper Arm Eyelet
A-02-VBC-5092 x 2
M3x10 Roundhead C-02-SC-R0310 x 4
M3x12 Flathead C-02-SC-F0312 x 4
Lightning12 Front Upper Arm Spacer, 1.5mm
A-01-VBC-5048 x 2
M3.3x0.4 Kingpin Shim C-02-VBC-5069 x 22
Lightning12 Kingpin C-02-VBC-5044 x 2
Front Spring (Medium/Gold) C-02-VBC-5042 x 2
6
M2.5x4 Roundhead
Ball Connector 4.7x12mm
Lightning Front Axle
Pivot Ball
Lightning12 Front Upper Arm Eyelet
M3x15mm Turnbuckle, Black
Lightning12 Front Upper Arm
Pivot Ball
Lightning10 ALU7075 Steering Knuckle
Lightning12 Front Lower Arm
A-02-VBC-5067
Lightning12 Front Upper
Arm Spacer, 1.5mm
Lightning12 Aluminum Upper Arm Mount
Lightning12 Aluminum
Front Bulkhead, Right
M3x12 Flathead
M3x10 Roundhead
Make Two (Leff And Right Side)
M3.3x0.4 Kingpin Shim
M2x8 Caphead C-02-SC-R2.0x8 x 2
Lightning12 Kingpin
Front Spring
(Medium/Gold)
M3.3x0.4 Kingpin Shim x 3
M3.3x0.4 Kingpin Shim x 7
M2.5x4 Roundhead
10
5
0
Note : 10 Is The Standard Setup
Note : Lower arm in the same direction,
dot marking should be facing up
<< Front >>
<< Rear >>
Dot Marking Dot Marking
M2x8 Caphead
Note : Tighten the screw slowly to
adjust the pivot ball movement
Upper Arm Mount Active Caster Setup
OPTIONAL FRONT SPRINGS :
Front Spring (Soft/Silver) C-02-VBC-5041
Front Spring (Hard/Black) C-02-VBC-5043
OPTIONAL FRONT UPPER ARM SPACER SET :
0.5mm/1.0mm Adjust Spacer
(D-05-VBC-0109)
07
Please note the direction of
the Upper Arm Eyelet as they
are offset.
3.5mm
M2.5 x 6 x 0.5 Spacer C02P50259 x 2
M2.5 x 6 x 0.5 Spacer
M3x3 Set Screw C-02-SC-SS-0303 x 2
OPTIONAL LIGHTNING FRONT AXLE :
Lightning Inline Front Axle C-02-P50211
M3x3 Set Screw

BAG MARKED
STEP6
08
© VBC Racing LIGHTNING10
Lightning Height Adjust Spacer, 1.5mm
A-01-VBC-5045 x 2
Front Suspension Assembly
6
M3x12 Flat Head Screw C-02-SC-F0312 x 4
1.80
1.2mm Spacer
0.8mm Spacer
No Spacer
3.25
6.15
Caster Adjustments
M2x4 Roundhead Screw C-02-SC-R0204 x 2
2mm Upper Hinge Pin C-02-VBC-5054 x 2
Caster Spacer, 0.8mm D-05-VBC-0110 x 2
M3x2mm Set Screw C-02-SC-SS-0302 x 2
Lightning10 Front Hinge Brace A-01-G50229 x 1
Caster Spacer, 1.2mm D-05-VBC-0110 x 2
M3x2mm Set Screw
Caster Spacer,
1.2mm
Caster Spacer,
0.8mm
2mm Upper Hinge Pin
M2x4 Roundhead Screw
OPTIONAL HEIGHT ADJUST SPACER SET :
0.5mm/1.0mm Height Adjuster Spacer
(D-05-VBC-0108)
Height Adjust Spacer, 1.5mm
2mm Upper Hinge Pin
M2x4 Roundhead Screw
Height Adjust Spacer
1.5mm
M3x12 Flat Head Screw
Wheel Base 250mm Setup
Wheel Base 253mm Setup
M3x8 Roundhead C-02-SC-R0308 x 4
M3x8 Roundhead
M3x8 Roundhead

BAG MARKED
STEP7
Ball Differential Assembly
09
© VBC Racing LIGHTNING10
Differental Drive Ring B-02-VBC-1001 x 2
Thrust Cone B-02-VBC-5081 x 1
Lightning12 Axle Height Adjuster
D-05-VBC-0114
7
Differential Seal O-ring B-02-VBC-5082 x 2
Ball Bearing 3/8”x1/4” C-02-BB-3814 x 1
Bevelled Washer C-02-VBC-5076 x 3
64 Pitch 88T Spur Gear A-03-P50232 x 1
Ball Bearing Flanged 3/8”x1/4”
C-02-BB-3814F x 4
Differential Seal O-ring
Lightning10 Carbon Rear Axle B-02-P50231
Ball Bearing Flanged 3/8”x1/4”
Differental Drive Ring
64 Pitch 88T Spur Gear A-03-P50232
1/8” Differential Balls
1/8” Differential Balls C-02-DB-0801S x 16
Ball Bearing 3/8”x1/4”
Lightning10 Rear Diff Hub
B-02-P50214
Ball Bearing Flanged 3/8”x1/4”
Thrust Cone
Bevelled Washers
M4 Nylon Nut
Bevelled Washers
Note : The Direction Of Washers
Diff Grease
LowHigh
M4 Nylon Nuts A-02-VBC-5075 x1
Differental Drive Ring
Differential Seal O-ring
64 Pitch 88T Spur Gear
Axle Height Adjuster Spacer A-01-VBC-5131 x2
Ball Bearing Flanged 3/8”x1/4”
Ball Bearing Flanged
3/8”x1/4”

BAG MARKED
STEP7-8
10
© VBC Racing LIGHTNING10
M2.5x8 Cap Head Screw C-02-SC-R2508 x 2
Servo And Top Plate Assembly
7
Ball Differential Assembly
M3x6x0.5mm Spacer B-02-VBC-5093 x 4
M3x8 Roundhead C-02-SC-R0308 x 4
Servo Spacer B-02-VBC-5013 x 2
Alum Servo Mount B-02-VBC-5012 x 2
Lightning10 Left Rear Wheel Hub B-02-P50213 x 1
3 Difference Servo Adaptor
For Sanwa/KO [A) /Futaba [F] /JR/Hitec [H]
Turnbuckle Cup (Long) A-03-VBC-5016 x 4
50mm Turnbuckle for Lightning Series B-02-P50234 x 2
Servo Saver Set
Turnbuckle Cup (Long)
50mm Turnbuckle
Turnbuckle Cup (Long)
M3x6x0.5mm Spacer
M3x6x0.5mm Spacer
M3x8 Roundhead
M3x8 Roundhead
1mm Servo Spacer
Note : Use this Spacer To
adjust the ackerman
Alum Servo Mount
Ball Connector 4.7x12mm
M3 Locknut
Make sure the screw is
correct for your servo
Optional : Tie Rod Wrench Set D-05-VBC-0048
SERVO IS NOT INCLUDED
8
M3 Locknut C-02-SC-NN03 x 2
Ball Connector 4.7x12mm A-02-VBC-5015 x 2
Servo Saver Set B-03-VBC-5017 x1
T1 7075 Spacer B-02-VBC-0019-10 x 2
T1 7075 Spacer
*B-02-VBC-5012 Alum Servo Mount
for mini servo setup and B-02-P50262
for standard servo setup
Alum Servo Mount for Low Profile Servo B-02-P50262
<< LEFT >>
<< RIGHT >>
32.50mm
M2.5x8 Cap Head
M2.5x8 Cap Head

BAG MARKED
STEP8
Servo And Top Plate Assembly
11
© VBC Racing LIGHTNING10
8
M3x6 Roundhead C-02-SC-R0306 x 4
M3x6 Flathead C-02-SC-F0306 x 6
Aluminum Shock Mount Brace A-01-VBC-5003 x 1
Shock Mount Plate A-01-VBC-5004 x 1
M3x6 Flathead
LightningF Upper Deck Support Mount B-02-VBC-5096 x 2
Lightning10 Graphite Front Shock Mount Plate A-01-P50208 x 1
M3x8 Flathead
M3x6 Flathead
M3x6 Roundhead
Shock Mount Plate
Aluminum Shock Mount Brace
M3x6 Roundhead
LightningF Upper Deck Support Mount
M3x6 Flathead
Lightning10 Graphite Front Shock Mount Plate
A-01-P50208

BAG MARKED
STEP9
Assemble TBX Shock
12
© VBC Racing LIGHTNING10
TBX Shock Body B-02-VBC-5023 x 1
TBX Shock Bottom Cap B-02-VBC-5025 x 1
TBX Piston [2 Holes] A-02-VBC-5027 x 1
TBX Shock Ball End B-02-VBC-5033 x 1
Shock Bottom O-ring Guard A-02-VBC-5030 x 1
M2x6mm O-ring (Blue) C-02-VBC-5037 x 1
Lightning12 TBX Shock Shaft C-02-VBC-5026 x 1
M1.5x10 O-ring C-02-VBC-5035 x 1
M1.5 E-Clip C-02-VBC-5038 x 2
TBX Shock O-ring Guard A-02-VBC-5029 x 1
TBX Shock Thru Cap A-02-VBC-5031 x 1
M1.0x7.5 O-ring C-02-VBC-5036 x 1
5mm Pivot Ball A-03-VBC-1027 x 1
9
TBX Spring Adjuster B-02-VBC-5024 x 1
TBX Piston [3 Holes] A-02-VBC-5028 x 1
Note The Direction Of
O-ring Guard
Fill supplied shock oil
and remove air by
moving the piston up
and down until air
bubbles disappear
TBX Shock Body
TBX Spring Adjuster
M1.5x10 O-ring
Insert Sealer O-Ring inside the Spring Adjuster Groove
TBX Shock Bottom Cap
Shock Bottom O-ring Guard
M2x6mm O-ring (Clean)
TBX Piston [2 Holes]
Lightning12 TBX Shock Shaft
M1.5 E-Clip
TBX Shock Ball End
TBX Spring Retainer
A-02-VBC-5032 x 1
M1.0x7.5 O-ring
TBX Shock Thru Cap
M2x6mm O-ring(Blue)
TBX Shock O-ring Guard
Lightning12 TBX Sping
[Gold/Medium]
C-02-VBC-5034
OPTIONAL LIGHTNING12 TBX SPRINGS :
C-02-VBC-5039 (Med. Soft/Silver)
C-02-VBC-5040 (Med. Hard/Black)
Note The Direction Of
O-ring Guard
Aluminum Shock Cap B-02-VBC-5022
M2x6mm O-ring (Clean) R-02-P50264x 1
5mm Pivot Ball

BAG MARKED
STEP9-10
TBX Shock Assembly
13
© VBC Racing LIGHTNING10
9
M3x6 Roundhead C-02-SC-R0306 x 1
M3x6 Roundhead
10
Front Bumper Assembly
M3x6 Roundhead C-02-SC-R0306 x 2
M3x6mm Flat Head Screw C-02-SC-F0306 x 2
M2x12 Shaft Pin B-02-VBC-0022 x 2
Body Height Adjuster Support A-03-VBC-0015 x 2
Front Body Post A-03-VBC-0013 x 2
Body Height Adjuster Support
Body Height Adjuster Support
Front Body Post
Front Body Post
Lightning10 Graphite
Front Bumper
Lightning10 Graphite
Front Bumper Top Plate
14mm Aluminum Standoff
14mm Aluminum Standoff B-02-VBC-5073 x 2
14mm Aluminum Standoff
M2x12 Shaft Pin
M2x12 Shaft Pin
M3x10mm Flat Head Screw C-02-SC-F0310 x 2
M3x6 Roundhead
M3x6 Roundhead
M3x10mm Flat Head
M3x6mm Flat Head
M3x6mm Flat Head
M3x10mm Flat Head
Lightning10 Graphite
Front Bumper Top Plate
Front Foam Bumber

BAG MARKED
STEP18-20
14
© VBC Racing LIGHTNING10
11
Installing Front Bumper
12
Rear Body Post Assembly
M2x12 Shaft Pin B-02-VBC-0022 x 2
Body Height Adjuster Support A-03-VBC-0015 x 2
Front Body Post A-03-VBC-0013 x 2
M3 Locknut C-02-SC-NN03 x 2
M3x10mm Flat Head Screw C-02-SC-F0310 x 2
M3x10mm Flat Head
M3x10mm Flat Head
M3 Locknut
M3 Locknut
M3x8 Roundhead C-02-SC-R0308 x 2
Body Height Adjuster Support
M2x12 Shaft Pin
Body Height Adjuster Support
M2x12 Shaft Pin

BAG MARKED
STEP18-20
Install Wheels And Motor
15
© VBC Racing LIGHTNING10
4-40x5/16” Cap Head Screw x 8
Bearing 1/8x5/16, Flanged C-02-BB-1856F x 4
M3 Locknut C-02-SC-NN03 x 2
M3.3x0.4 Kingpin Shim C-02-VBC-5069 x 2
12
M3x8 Roundhead C-02-SC-R0308 x 2
13
Install Motor And Electronics
M3x6x0.5mm Spacer B-02-VBC-5093 x 4
M3x6x0.5mm Spacer
4-40x5/16” Cap Head
4-40x5/16” Cap Head
Bearing 1/8x5/16, Flanged
Bearing 1/8x5/16, Flanged
M3 Locknut
M3.3x0.4 Kingpin Shim
M3x8 Roundhead

BAG MARKED
STEP12
16
© VBC Racing LIGHTNING10
Install Electronics And Battery
Install ESC And Receiver
[Items Are Not Included]
7.4V Lipo Battery
[Item Is Not Included]
Double Side
Tape
15

Order Number Package Descriptions Parts Number Parts Descriptions Quantity in a pkg
X-03-P50245 Lightning10 Decals X-03-P50245 Lightning10 Decals 2
A-01-P50205 Lightning10 2.5mm Graphite Main Chassis A-01-P50205 Lightning10 2.5mm Graphite Main Chassis 1
A-01-VBC-5003 Lightning Alum Shock Mount Brace A-01-VBC-5003 Lightning Alum Shock Mount Brace 1
A-01-G50227 Lightning10 Front Suspension Plate A-01-G50227 Lightning10 Front Suspension Plate 1
A-01-P50207 Lightning10 Graphite Front Bumper 1
A-01-P50240 Lightning10 Graphite Front Bumper Top Plate 2
A-01-P50208 Lightning10 Graphite Front Shock Mount Plate A-01-P50208 Lightning10 Graphite Front Shock Mount Plate 1
B-02-VBC-5005 Lightning 17mm Aluminum Standoff B-02-VBC-5005 17mm Aluminum Standoff 4
B-02-G50228 Lightning Rear Tweak Plate Standoff B-02-G50228 Lightning Rear Tweak Plate Standoff 2
A-01-VBC-5004 Lightning Shock Mount Plate A-01-VBC-5004 Shock Mount Plate 1
A-03-VBC-5007 Pivot Brace (bottom) 1
A-03-VBC-5008 Pivot Brace (cover) 1
A-03-VBC-5009 Pod Link Set for Lightning/Assoc.R5 series A-03-VBC-5009 Pod Link 2
A-03-VBC-1027 Pivot Balls for Lightning/Assoc.R5 series A-03-VBC-1027 5mm Pivot Ball 5
A-03-VBC-0013 Front Body Post 2
A-03-VBC-0014 Rear Body Post 2 A-03-VBC-0015 Body Height Adjuster Support 4
B-02-VBC-0076 Body Clip 8
B-02-VBC-0020-12
M2x12 Shaft Pin 4
B-02-VBC-0076 Body Clips B-02-VBC-0076 Body Clips 20
B-02-VBC-5012 Alum Servo Mount for Lightning/Assoc.R5 series B-02-VBC-5012 Aluminum Servo Mount 2
B-02-VBC-5013 Servo Spacer for Lightning/Assoc.R5 series B-02-VBC-5013 Servo Spacer 2
B-02-P50234 50mm Turnbuckle for Lightning Series B-02-P50234 50mm Turnbuckle for Lightning Series 2
B-02-VBC-5015 Ball Connector 4.7x12mm (5pcs) B-02-VBC-5015 Ball Connector 4.7x12mm (5pcs) 5
A-03-VBC-5016 Turnbuckle Cup (Long) A-03-VBC-5016 Turnbuckle Cup (Long) 8
B-03-VBC-5017 Servo Saver Set for Lightning/Assoc.R5 series B-03-VBC-5017 Servo Saver Set 1
B-02-VBC-5018 Damper Tube Shaft 1
B-02-VBC-5019 Damper Tube 1
B-02-VBC-5020 4.7mm Ball Nuts B-02-VBC-5020 4.7mm Ball Nuts 5
A-03-VBC-5021 Turnbuckle Cup (Short) A-03-VBC-5021 Turnbuckle Cup (Short) 4
B-02-VBC-5022 TBX Shock Cap 1
B-02-VBC-5023 TBX Shock Body 1
B-02-VBC-5024 TBX Spring Adjuster 1
B-02-VBC-5025 TBX Shock Bottom Cap 1
C-02-VBC-5026 Lightning TBX Shock Shaft 1
A-02-VBC-5027 TBX Pistion (2 Holes) 1
A-02-VBC-5028 TBX Pistion (3 Holes) 1
A-02-VBC-5029 Shock O-ring Guard 1
A-02-VBC-5030 Shock Bottom O-ring Guard 1
A-02-VBC-5031 TBX Shock Thru Cap 1
A-02-VBC-5032 TBX Spring Retainer 1
B-02-VBC-5033 Shock Ball End 1
C-02-VBC-5034 Lightning TBX Spring (Medium) 1
C-02-VBC-5035 M1.5x10 O-ring 1
C-02-VBC-5036 M1.0x7.5 O-ring 1
C-02-VBC-5037 M2x6 O-ring 1
A-03-VBC-1027 5mm Pivot Ball 1
B-02-VBC-5015 Ball Connector 4.7x12mm (5pcs) 1
C-02-VBC-5038 M1.5 E-Clip 2
TBX Center Shock Set for Lightning/Assoc.R5 series
D-05-VBC-0101 Pivot Brace for Lightning/Assoc.R5 series D-05-VBC-0103 Damper Tube Set for Lightning/Assoc.R5 series
D-05-VBC-0104 D-05-VBC-0157 Lightning10 Graphite Front Bumper Set D-05-VBC-0012 Body Posts Pack
Order Number Package Descriptions Parts Number Parts Descriptions Quantity in a pkg
B-02-VBC-5022 TBX Shock Cap 1
B-02-VBC-5023 TBX Shock Body 1
B-02-VBC-5024 TBX Spring Adjuster 1
B-02-VBC-5025 TBX Shock Bottom Cap 1
C-02-VBC-5026 TBX Shock Shaft for Lightning/Assoc.R5 series C-02-VBC-5026 Lightning TBX Shock Shaft 1
A-02-VBC-5027 TBX Pistion (2 Holes) 2
A-02-VBC-5028 TBX Pistion (3 Holes) 2
A-02-VBC-5029 Shock O-ring Guard 2
A-02-VBC-5030 Shock Bottom O-ring Guard 2
A-02-VBC-5031 TBX Shock Thru Cap 1
A-02-VBC-5032 TBX Spring Retainer 1
B-02-VBC-5033 Shock Ball End 1
C-02-VBC-5034 TBX Spring (Medium) for Lightning/Assoc.R5 series C-02-VBC-5034 Lightning TBX Spring (Medium) 2
C-02-VBC-5035 M1.5x10 O-ring C-02-VBC-5035 M1.5x10 O-ring 10
C-02-VBC-5036 M1.0x7.5 O-ring C-02-VBC-5036 M1.0x7.5 O-ring 10
C-02-VBC-5037 M2x6 O-ring C-02-VBC-5037 M2x6 O-ring 10
C-02-VBC-5038 M1.5 E-Clip C-02-VBC-5038 M1.5 E-Clip 10
C-02-VBC-5042
Front Springs (Medium) for Lightning/Assoc.R5 series
C-02-VBC-5042 Front Springs (Medium) for Lightning 1/12 2
C-02-VBC-5044 Kingpin for Lightning/Assoc.R5 series C-02-VBC-5044 Lightning12 Kingpin 2
A-01-VBC-5045 Lightning12 Height Adjust Spacer, 1.5mm A-01-VBC-5045 Lightning12 Height Adjust Spacer, 1.5mm 2
A-01-VBC-5048 Lightning12 Front Upper Arm Spacer, 1.5mm A-01-VBC-5048 Lightning12 Front Upper Arm Spacer, 1.5mm 2
A-03-P-50258 V2 Front Upper Arm for Lightning Series A-03-P-50257 V2 Front Upper Arm for Lightning Series 2
A-02-VBC-5052
Front Upper Arm Eyelet for Lightning/Assoc.R5 series
A-02-VBC-5052 Lightning12 Front Upper Arm Eyelet 2
A-02-VBC-5053 M3x15 Turnbuckle BK for Lightning/Assoc.R5 series A-02-VBC-5053 M3x15 Turnbuckle, Black 2
C-02-VBC-5054 2mm Upper Pin for Lightning/Assoc.R5 series C-02-VBC-5054 2mm Upper Hinge Pin 4
A-01-VBC-5055 Lightning12 Caster Spacer. 0.8mm 2
A-01-VBC-5056 Lightning12 Caster Spacer. 1.2mm 2
B-02-VBC-5057
Aluminum Upper Arm Mount for Lightning/Assoc.R5 series
B-02-VBC-5057 Lightning12 Aluminum Upper Arm Mount 1
B-02-P50233 Lightning10 ALU7075 Steering Knuckle 2
C-02-P50259 M2.5x0.5 Shim 2
B-02-VBC-5060 Lightning Front Axles B-02-VBC-5060 Lightning Front Axle 2
A-01-G50229 Lightning10 Front Hinge Brace A-01-G50229 Lightning10 Front Hinge Brace 1
B-02-VBC-5065
Alum Front Bulkhead L for Lightning/Assoc.R5 series
B-02-VBC-5065 Lightning12 Alum Front Bulkhead, Left 1
B-02-VBC-5066
Alum Front Bulkhead R for Lightning/Assoc.R5 series
B-02-VBC-5066 Lightning12 Alum Front Bulkhead, Right 1
A-03-P-50257 V2 Front Lower Arm for Lightning Series A-03-P-50257 V2 Front Lower Arm for Lightning Series 2
B-02-VBC-5068 Pivot Ball for Lightning/Assoc.R5 series B-02-VBC-5068 Pivot Ball 4
C-02-VBC-5069
King Pin Shim, M3.3x0.4 for Lightning/Assoc.R5 series
C-02-VBC-5069 Lightning12 King Pin Shim, M3.3x0.4 (20pcs) 20
A-01-P50210 Lightning10 Rear Tweak Plate A-01-P50210 Lightning10 Rear Tweak Plate 1
D-05-VBC-0105
TBX Shock Body Set for Lightning/Assoc.R5 series
D-05-VBC-0106
TBX Shocks Parts Set for Lightning/Assoc.R5 series
TBX Plastic Parts Set for Lightning/Assoc.R5 series
D-05-VBC-0110 Caster Spacer Set for Lightning/Assoc.R5 series D-05-VBC-0107 D-05-VBC-0156 Steering Knuckles for Lightning10
LIGHTNING10 PARTS LIST

FOR ONLINE ORDERS, PLEASE VISIT OUR WEBSITE WWW.VBCRACING.COM OR VISIT YOUR NEAREST HOBBY STORE.
LIGHTNING10 PARTS LIST
Order Number Package Descriptions Parts Number Parts Descriptions Quantity in a pkg
A-03-VBC-1047 Side Spring (Soft) 2
A-03-VBC-1047 Side Spring (Medium) 2
A-03-VBC-1047 Side Spring (Hard) 2
A-03-VBC-1047 Side Spring Set for Lightning/Assoc.R5 series
B-02-VBC-5073 14mm Aluminum Standoff B-02-VBC-5073 14mm Aluminum Standoff 4
B-02-VBC-5074
Alum Side Spring Retainer for Lightning/Assoc.R5 series
B-02-VBC-5074 Aluminum Side Spring Retainer 2
C-02-BB-3814F Bearing, 3/8 x 1/4, Flanged 2
C-02-BB-3814 Bearing, 3/8 x 1/4 1
A-02-VBC-5075 M4 Nylon Nuts 1
C-02-VBC-5076 Belleville Washer 3
A-03-P50232 64 Pitch 88T Spur Gear 1
B-02-P50231 Lightning10 Carbon Rear Axle 1
D-05-VBC-0158
Ball Differential Set for Lightning10
B-02-P50213 Lightning10 Left Rear Wheel Hub 1
B-02-P50214 Lightning10 Rear Diff Hub 1
B-02-VBC-5081 Thrust Cone 1
C-02-DB-0801S 1/8" Diff Balls 16
B-02-VBC-1001 D-Drive Ring 2
B-02-VBC-5082 Diff Seal O-ring 2
D-05-VBC-0158
Ball Differential Set for Lightning10
A-02-VBC-5075 M4 Nylon Nuts for Lightning/Assoc.R5 series A-02-VBC-5075 M4 Nylon Nuts 2
C-02-VBC-5076 Bevelled Washer C-02-VBC-5076 Bevelled Washer 6
A-03-P50232 64 Pitch 88T Spur Gear A-03-P50232 64 Pitch 88T Spur Gear 1
B-02-P50231 Lightning10 Carbon Rear Axle B-02-P50231 Lightning10 Carbon Rear Axle 1
B-02-P50213 Lightning10 Left Rear Wheel Hub B-02-P50213 Lightning10 Left Rear Wheel Hub 1
B-02-P50214 Lightning10 Rear Diff Hub B-02-P50214 Lightning10 Rear Diff Hub 1
B-02-VBC-5081 Thrust Cone for Lightning/Assoc.R5 series B-02-VBC-5081 Thrust Cone 1
C-02-DB-0801S 1/8" Diff Balls for Lightning/Assoc.R5 series C-02-DB-0801S 1/8" Diff Balls 8
B-02-VBC-1001 Diff D Ring B-02-VBC-1001 Diff D Ring 2
B-02-VBC-5082 Diff Seal O-ring B-02-VBC-5082 Diff Seal O-ring 10
A-01-VBC-5083 Lightning Graphite Lower Pod Plate A-01-VBC-5083 Lightning Graphite Lower Pod Plate 1
A-01-P-50209 Lightning10 Graphite Rear Shock Mount Plate A-01-P50209 Lightning10 Graphite Rear Shock Mount Plate 1
C-02-BB-1856F
Bearing 1/8 x 5/16, Flanged for Lightning/Assoc.R5 series
C-02-BB-1856F Bearing 1/8 x 5/16, Flanged 2
C-02-BB-3814 Bearing, 3/8 x 1/4 for Lightning/Assoc.R5 series C-02-BB-3814 Bearing, 3/8 x 1/4 2
C-02-BB-3814F
Bearing, 3/8 x 1/4, Flanged for Lightning/Assoc.R5 series
C-02-BB-3814F Bearing, 3/8 x 1/4, Flanged 2
A-02-VBC-5085 Axle Height Adjuster, #1 2
A-02-VBC-5086 Axle Height Adjuster, #2 2
A-02-VBC-5087 Axle Height Adjuster, #3 2
A-02-VBC-5088 Axle Height Adjuster, #4 2
D-05-VBC-0114 Lightning Axle Height Adjuster
A-01-VBC-5131 Axle Height Adjuster Spacer A-01-VBC-5131 Axle Height Adjuster Spacer 2
B-02-VBC-5128 LightningF Al7075 Motor Mount B-02-VBC-5128 LightningF Al7075 Motor Mount 1
B-02-VBC-5129 LightningF Al7075 Left Bulkhead B-02-VBC-5129 LightningF Al7075 Left Bulkhead 1
A-01-P50206 Lightning10 Graphite Rear Pod Strut A-01-P50206 Lightning10 Graphite Rear Pod Strut 1
A-02-VBC-5092 Ball Connector 4.7x17mm A-02-VBC-5092 Ball Connector 4.7x17mm 5
B-02-VBC-0019-20 3x5.5x2 Alum Spacer
B-02-VBC-0019-20
3x5.5x2 Alum Spacer 10
B-02-VBC-0019-10 3x5.5x1 Alum Spacer
B-02-VBC-0019-10
3x5.5x1 Alum Spacer 10
Order Number Package Descriptions Parts Number Parts Descriptions Quantity in a pkg
C-02-SC-C0440 4-40x5/16" Cap Head Screw C-02-SC-C0440 4-40x5/16" Cap Head Screw 20
C-02-SC-R2504 M2.5x4mm Roundhead Screw C-02-SC-R2504 M2.5x4mm Roundhead Screw 20
C-02-SC-R2508 M2.5x8mm Cap Head Screw C-02-SC-R2508 M2.5x8mm Cap Head Screw 20
C-02-SC-R2.0x6 M2.0x6mm Cap Head Screw C-02-SC-R2.0x6 M2.0x6mm Cap Head Screw 30
C-02-SC-R2.0x8 M2.0x8mm Cap Head Screw C-02-SC-R2.0x8 M2.0x8mm Cap Head Screw 20
C-02-SC-R0204 M2x4mm Roundhead Screw C-02-SC-R0204 M2x4mm Roundhead Screw 20
C-02-SC-NN03 M3 Locknut C-02-SC-NN03 M3 Locknut 20
B-02-VBC-5093 M3x6x0.5 Spacer B-02-VBC-5093 M3x6x0.5 Spacer 20
C-02-SC-F0310 M3x10mm Flathead Screw C-02-SC-F0310 M3x10mm Flathead Screw 20
C-02-SC-R0310 M3x10mm Roundhead Screw C-02-SC-R0310 M3x10mm Roundhead Screw 20
C-02-SC-F0312 M3x12mm Flathead Screw C-02-SC-F0312 M3x12mm Flathead Screw 20
C-02-SC-F0306 M3x6mm Flathead Screw C-02-SC-F0306 M3x6mm Flathead Screw 20
C-02-SC-R0306 M3x6mm Roundhead Screw C-02-SC-R0306 M3x6mm Roundhead Screw 20
C-02-SC-F0308 M3x8mm Flathead Screw C-02-SC-F0308 M3x8mm Flathead Screw 20
C-02-SC-R0308 M3x8mm Roundhead Screw C-02-SC-R0308 M3x8mm Roundhead Screw 20
C-02-SC-SS-0308 M3x8mm Set Screw C-02-SC-SS-0308 M3x8mm Set Screw 20
C-02-VBC-5039 TBX Spring(Med-Soft) for Lightning/Assoc.R5 series C-02-VBC-5039 Lightning TBX Spring (Med. Soft) 2
C-02-VBC-5040
TBX Spring (Med-Hard) for Lightning/Assoc.R5 series
C-02-VBC-5040 Lightning TBX Spring (Med. Hard) 2
C-02-VBC-5041 Front Springs (Soft) for Lightning/Assoc.R5 series C-02-VBC-5041 Front Springs (Soft) for Lightning 1/12 2
C-02-VBC-5043 Front Springs (Hard) for Lightning/Assoc.R5 series C-02-VBC-5043 Front Springs (Hard) for Lightning 1/12 2
A-01-VBC-5046 Lightning12 Height Adjust Spacer, 0.5mm 2
A-01-VBC-5047 Lightning12 Height Adjust Spacer, 1.0mm 2
A-01-VBC-5049 Lightning12 Front Upper Arm Spacer, 0.5mm 2
A-01-VBC-5050 Lightning12 Front Upper Arm Spacer, 1.0mm 2
A-03-VBC-1047 Side Spring (Soft) 2
A-03-VBC-1047 Side Spring (Medium) 2
A-03-VBC-1047 Side Spring (Hard) 2
C-02-G-50254 TiN Coated 2mm Upper Pin for Lightning Series C-02-G-50254 TiN Coated 2mm Upper Pin for Lightning Series 2
C-02-G-50255 TiN Coated Kingpin for Lightning Series C-02-G-50255 TiN Coated Kingpin for Lightning Series 2
C-02-G-50256 TiN Coated TBX Shock Shaft C-02-G-50256 TiN Coated TBX Shock Shaft 2
C-02-G50222 Low CG Brass Weight 23.5gm C-02-G50222 Low CG Brass Weight 23.5gm 2
C-02-P50211 Lightning Inline Front Axle C-02-P50211 Lightning Inline Front Axle 2
D-05-VBC-0109
Lightning12 Front Upper
Arm Spacer Set (0.5, 1.0mm)
Side Spring Set for Lightning/Assoc.R5 series
A-03-VBC-1047
Option items for Lightning10
D-05-VBC-0108
Lightning12 Height
Adjust Spacer Set (0.5,1.0mm)

Instruction Book P-01-P50265 VBC Racing Lightning10 1/10 Pan Car Kit D-05-VBC-CK03
www.vbcracing.com
1/10 SCALE ELECTRIC COMPETITION PAN CAR KIT
COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT