Veltia 01461.W User manual

Related products
VE-01451.B VE-01451.W
VE-01451.S
PRESCRIPTION
VELTIA
C/ Pare Rodés, 26, 3ª planta, Torre A, 1º7ª
08208 · Sabadell (Barcelona)
Tel [phone] · Fax [phone]
[email protected] · www.veltia.com
01461.W
These specifications can be modified and/or rectified due to manufacture requirements. v.01 09.15 - PAG.1
TECHNICAL DATA
BIGFLOW HAND DRYER
COD.
Automatic sensor hand dryer
· Hand dryer powered by electronic sensor.
· White ABS plastic cover.
· Sturdy and vandal proof.
· Not edges at all for ensure a safety use.
· Suitable for colectivities and designed for high traffic bathroom and
continuous use.
· According to the LVD and EMC Directives and current European
Standards.
· Voltage/Frequency: 220-240 V - 50/60 Hz.
· Maximum consumption 6.5 A.
· Total power 1500 W.
· Electrical resistance power: 1400 W.
·Ni-Cr heating element wire. Ceramic support .
· Motor power: 100 W.
· Electrical isolation: Class II.
· Protection index: IP21.
· Universal motor without brushes (maintenance not needed).
· Motor speed 2800 r.p.m.
· Overheating resistance thermostat (automatic rearmament).
· Thermal fuse double security adjusted to 100ºC.
· The appliance is delivered without plug and plug cord.
· White ABS plastic cover manufactured in one piece (thickness=3 mm).
· Protection grid made in polycarbonate. Fire-resistant ABS V0 plastic
evolute.
· Wall fixation by 3 drills (Ø 8 mm). Fixing material included.
· Electronic Infrared sensor that stops the function when the hands leave
the active range.
· Sensor distance: from 8 to 50 cm
· Air temperature (room temperature de 21ºC): 51ºC.
· Air flow 2300 l/min (138 m3/h) speed 65 Km/h.
· Noise level (from 2 meters): 60 dB.
· Total dimensions: 325high x 255width x 152 depth (mm).
· Individual packaging dimensions: 360x300x190 mm.
· Net weigh: 2,5 kg.
· Function: place your hands under the appliance. The dryer will start
automatically and it continues working while the hands are within the
active range. The device switches off after a few seconds of removal.
· Cleaning: we recommend cleaning with a cotton cloth slightly
moistened with a soap solution. Then dry it.
Hand dryer with ABS plastic cover (thickness=3 mm). Total power
1500 W. Motor speed 2800 r.p.m
Dimensions: 325high x 255width x 152 depth (mm).

Dimensions in mm
ESQUEMA DIMENSIONAL
INSTALLATION
These specifications can be modified and/or rectified due to manufacture requirements. v.01 09.15 - PAG.2
Automatic sensor hand dryer
VELTIA
C/ Pare Rodés, 26, 3ª planta, Torre A, 1º7ª
08208 · Sabadell (Barcelona)
Tel [phone] · Fax [phone]
[email protected] · www.veltia.com
BIGFLOW HAND DRYER
COD.
01461.W
In toilet areas with a high frequency use, the recommendation is to install one hand dryer for each toilet. In toilet areas with a lower frequency of
use, the recommendation is to install one hand dryer for every two sinks or two dryers for every three washbasins.
Installation should be as shown in fig-0. In case of installation on marble or shiny surfaces, it should be located 40 cm above the surface.