Vemus miniK 10m User manual

OPERATING MANUAL
cabinets boxes drawers
Please read this manual
before using the miniK10m
and miniK10p
The easy lock in every aspect

Page 2
INDEX
Description.......................................................................................................................... 3
Introduction......................................................................................................................... 3
Usage ................................................................................................................................. 4
Initial Setup......................................................................................................................... 4
Assign Master Card........................................................................................................ 4
Selecting Operation Option of the miniK10 .................................................................... 4
Assign/Delete Service Card(s) ....................................................................................... 5
Assign User Card(s) ....................................................................................................... 5
Deleting User Card......................................................................................................... 5
Operating Instructions ........................................................................................................ 6
Personal Operation With Card To Lock/ To Unlock ........................................................ 6
Locker Mode Operation With Card To Lock/ To Unlock............................................... 6-7
Cardless Personal Operation ......................................................................................... 7
• Change Password................................................................................................ 7
• To Unlock With Password .................................................................................... 7
• To Unlock With Master or Service Card ............................................................... 7
• To Lock With Password........................................................................................ 8
• To Lock With Master Card.................................................................................... 8
Cardless Locker Mode Operation................................................................................... 8
• To Lock With Password........................................................................................ 8
• To Lock With Master Card.................................................................................... 8
• To Unlock With Password .................................................................................... 9
• To Unlock With Master or Service Card ............................................................... 9
Locker Mode Operation with Card or Password To Lock/Unlock ................................. 10
• To Lock With Password...................................................................................... 10
• To Unlock With Password .................................................................................. 10
• To Lock With Any Card........................................................................................11
• To Unlock With Any Card ....................................................................................11
Program Table .................................................................................................................. 12
Programming Instuctions.................................................................................................. 13
Technical Specications ................................................................................................... 15
Light and Audio Warnings................................................................................................. 16
General Warnings............................................................................................................. 16
Cams ................................................................................................................................ 17
Changing the Battery........................................................................................................ 17
Battery Failure Override ................................................................................................... 17
Limited Warranty............................................................................................................... 17
Liability Limits ................................................................................................................... 17
Maintenance..................................................................................................................... 18
Quick Info ......................................................................................................................... 19

Page 3
1. Red LED
2. Green LED
3. Keypad
4. Lock Body
5. Closing Position
6. Handle Indicator
7. Opening Position
8. Handle
9. Mounting Screw
10. Lock Body
11. Battery Cover
12. Battery Cover Screw
13. ID Label
14. Hand Knob Frame
15. Cam
16. Cam Screw
17. Cylinder Nut, R/L Stop Cam
18. Open/Closed Indicator
INTRODUCTION
Front Back
DESCRIPTION:
Besides the stylish and enriching design of the miniK10m / miniK10p
cabinet lock, there are various features that make the lock different from
others, such as allowing to use with wet hands, easy and quick installation
at wood and steel cabinets, easy application at existing cabinets, easy
application at right/left cabinet doors, higher battery life with very low energy
consumption, high reliability and operating with a contactless card.
Emergency
Battery
Back Up

Page 4
USAGE:
Contactless card lock can be used with three types of cards: “User Card,
Service Card and Master Card”. Also, the lock can be used with a password
by selecting the user card free operation. Service card is passive by default.
You should center the card when holding over the keypad to enable accurate
reading. Since the device enters the sleep mode to offer low energy
consumption, you need to wake the lock
up by pressing any button before each
operation.
INITIAL SETUP:
• Assign Master Card:
No card is dened as factory default in the memory of your lock. Once a
Master Card is introduced, it does not dene another Master Card in the lock.
1-Press the key twice. The lock will beep tone.
2- And then present the master card to the keypad until one tone beep is
heard and green led blinks.
• Selecting Operation option of the miniK10:
1- Press the key twice, present the master card to the keypad and
press the key , green and red leds will blink.
2- Press 1 for selecting operation modes. And then:
Press 0 for Personal Operation with card.
Press 1 for Locker Mode operation with card.
Press 2 for cardless Personal Operation.
Press 3 for cardless Locker Mode operation.
Press 4 for Locker Mode operation card or password.
This step is valid if
there is no assigned
Master Card before.

Page 5
• Assign/Delete Service card(s): (If you don’t need to use any service
card, skip this step)
1- Press the key twice, present the master card to the keypad and
press the key , green and red leds will blink.
2- Press 5 for selecting service card assign / delete option. And then:
Press 0 for all service cards are deleted.
Press 1 for assignment of 1. service card.
Press 2 for assignment of 2. service card.
Press 3 for assignment of 3. service card.
3- Present that service card to lock.
• Assign User card(s): (If you don’t need to use any user card, skip this
step.) If Personal Operation with card option is selected:
1- Press the key and then present Master Card to the keypad, press
the key again.
2- Then enter the sequence number of User Card
3- Present that card to lock.
• Deleting User card: (If you don’t need to use any user card, skip this
step) If Personal Operation with card option is selected:
1- Press and then present master card to the keypad, press .
2- Then enter the sequence number of user card.
Sequence
Number
Sequence
Number

Page 6
OPERATING INSTRUCTIONS
Personal Operation with card (if selected)
• To Unlock:
1- Press any key for wake the lock up.
2- Present an assigned User Card to the keypad in 3 seconds.
3- Turn the handle to the unlocked position.
• To Lock:
1- Press any key for wake the lock up.
2- Present an assigned User Card to the keypad in 3 seconds.
3- Turn the handle to the locked position.
Locker Mode Operation with card (if selected)
• To Lock:
1- Press any number button for wake the lock up.
2- Present any card / master card to the keypad in 3 seconds.
3- Turn the handle to the locked position.

Page 7
• To Unlock:
1- Press any number button for wake the lock up.
2- Present the card which closed the lock to the keypad in 3 seconds.
3- Turn the handle to the unlocked position.
Cardless personal operation (if selected)
• Change Password: (default “1010”)
1- Press the key and then enter the current password by using
keypad, press the key again.
2- And then enter the new password by using keypad.
• To Unlock with Password: (default “1010”)
1- Enter the user password. 2- Turn the handle to the unlocked position.
• To Unlock with Master or Service Card:
1- Press the key for wake the lock up.
2- Present Master or Service Card to the keypad in 3 seconds.
3- Turn the handle to the unlocked position.
USER PASSWORD
OLD PASSWORD NEW PASSWORD

Page 8
• To Lock with Password: (default “1010”)
1- Enter the User Password. 2- Turn the handle to the locked position.
• To Lock with Master Card:
1- Press the key for wake the lock up.
2- Present Master Card to the keypad in 3 seconds
3- Turn the handle to the locked position.
Cardless locker mode operation (if selected)
• To Lock with Password:
1- Enter the new password. 2- Turn the keypad to the locked position.
• To Lock with Master Card:
1- Press the key for wake the lock up.
2- Present Master Card to the keypad in 3 seconds.
3- Turn the handle to the locked position.
USER PASSWORD
LOCKER MODE PASSWORD

Page 9
• To Unlock with Password:
1- Enter the same password with locking operation.
2- Turn the handle to the unlocked position.
• To Unlock with Master or Service Card:
1- Press the key for wake the lock up.
2- Present Master or Service Card to the keypad in 3 seconds.
3- Turn the handle to the unlocked position.
LOCKER MODE PASSWORD
The unlocking direction depends on the type of door where
miniK10 is used. All locking and unlocking illustrations depict right
handed door installation.

Page 10
Locker Mode Operation with Card or Password to Lock/Unlock
(if selected)
• To Lock with Password:
1- Enter the new password.
2- Turn the keypad to the locked position
• To Unlock with Password:
1- Enter the same password with locking operation.
2- Turn the handle to the unlocked position.
If you lock the cam lock with password you have to open it with
password not with card.
LOCKER MODE PASSWORD
LOCKER MODE PASSWORD

Page 11
• To Lock with any card:
1- Press the key for wake the lock up.
2- Present the card that closes the lock to the keypad in 3 seconds.
3- Turn the handle to the locked position.
• To Unlock with any card:
1- Press button for wake the lock up.
2- Present any card to the keypad in 3 seconds.
3- Turn the handle to the unlocked position.
If you lock with any card, you have to open it with the card you
locked, not with password.

Page 12
0 1
Factory Settings
Prog. No 1-1: Locker mode operation with card
Prog. No 2-1: Audible beeps and conrmations
Prog. No 3-0: Penalty operation PASSIVE
Prog. No 4-0: Delete all user card
Prog. No 5-0: Service card PASSIVE
Prog. No 6-0: Locking with password
Prog. No 7-0: Warning of open lock PASSIVE
Prog. No 8-0: Resetting User Password with Service card usage PASSIVE
Prog. No 9-0: Lock block PASSIVE (if service card is active)
1
0Personal Operation with card (individual operation)
1Locker Mode Operation with card (multiple user)
2Cardless Personal Operation (individual operation)
3Cardless Locker Mode Operation (multiple user)
4Locker Mode Operation with Card or Password
20Mute Operation
1Audible Operation
30Penalty PASSIVE
1Penalty ACTIVE
40Delete all user cards
1User password is restored to default, which is “1010”.
5
0Service Card PASSIVE / DELETE
1Assignment of 1.Service Card
2Assignment of 2.Service Card
3Assignment of 3.Service Card
60Locking with Password
1Automatic Locking
70Warning of lock open PASSIVE
1Warning of lock open ACTIVE
80Resetting User Password with Service card usage PASSIVE
1Resetting User Password with Service card usage ACTIVE
90Block the Lock PASSIVE (if service card is active)
1Block the Lock ACTIVE (if service card is active)
Program Table
PROG.
SELECT.

Page 13
PROGRAMMING INSTRUCTIONS
1- Press the key twice, present the Master Card and then press the
key , green and red leds will blink.
2- Enter the program number to be customized and then enter the selected
settings number. (Press Program Number and then Selection Number)
Restore Default Settings: Press 0 - 1
Default Settings are:
Locker mode operation with card, audible operation, penalty operation is
not active, service card is not active, locking with password, door open
warning is not active, resetting user password with service card usage is
not active, blocking the lock is not active.
Mute Operation: Press 2 - 0
All audio warnings can be turned off if mute operation is selected (except
warning beeps).
Audible Operation: Press 2 - 1
Button feedback, warnings and conrmation are audible.
Penalty Operation: Press 3 - 1
Prevents tampering of lock by unauthorized people. Lock is blocked for
5 minutes if wrong password / card is entered three times consecutively.
Factory default is that this feature is not active. Press 3 - 0
Delete All User Cards: Press 4 - 0
It deletes all user cards assigned in the Personal operation with card
option.
Reset User Password: Press 4 - 1
User password is restored to default “1010” in the Cardless personal
operation option.

Page 14
Service Card(s): When activated, they are only authorized to unlock.
(See Assign/Delete Service card(s), page 5) When the lock is opened with
these cards, according to Prog.8, the user password/card can be reset
and the lock can be blocked according to Prog.9 as well.
Factory default is that service card(s) feature is not active. Press 5 - 0
Locking with password / card: (1) Press 6 - 0
Locking operation require a password / card to lock.
Automatic Locking (without password/card): (1) Press 6 - 1
Locking operation does not require a password / card to lock.
Warning of open lock : (1) Press 7 - 1
After lock is open for one minute, lock gives an audible warning to user
with 8 beeps every seconds to notify user that the lock has been left open.
Factory default is that this feature is not active. Press 7 - 0
Resetting User Password with Service Card usage: (1), (2) Press 8 - 1
When the lock is unlocked with the service Card, the User Password is
reset. The User Password is restored to default, which is “1010”.
Factory default is that this feature is not active. Press 8 - 0
Blocking the lock : (2) Press 9 - 1
If lock opened with Service Card, it can be blocked from further User Card
access. This would insure Service Card is only used to access locks in
emergency. Master Card access would then be required to set up User
Card again.
Factory default is that this feature is not active. Press 9 - 0
(1) : Valid for Personal operation with card or cardless Personal Operation
options.
(2) : Valid if any Service Card is active.

Page 15
TECHNICAL SPECIFICATIONS:
ATTENTION: (*) Battery life may vary in accordance with battery brand,
programming parameters and environmental conditions of the product
is used.
ATTENTION: Remember to write down your passwords after
programming and prior to installing lock.It is not possible to open lock if it
is in installed and you forget your passwords.
ATTENTION: miniK10m / miniK10p is made for only interior usage.
Dimension (WxHxD) 34 x 85 x 27 mm
Weight 70,4 g (2.48 oz) (excluding cam and mounting)
Key Pad Silicone Keypad with metal dome
Operating Temperature +10 / +50 °C (50 - 122 °F)
Storage Temperature +0 / +60 °C (32 - 140 °F)
Operating Moisture 20% - 80% Rh (without condensation)
Replaceable Battery 3V Lithium CR2450
Battery Life (*) At least 5 years (for 10 uses a day)
K10p CARD SPECIFICATIONS:
K10m APPROPRIATE CARD:
ISO 1443A / B compliant cards (Mifare DESre®, Mifare Classic®, etc.)
Transponder Chip EM4100 Compatible
Frequency 125Khz
ID Size 64 bit Read Only
Encoding Manchester Encoding

Page 16
LIGHT AND AUDIO WARNINGS:
GENERAL WARNINGS:
- Read manual before using lock.
- Periodically check nuts and screws to be tightened.
- Do not over-tighten nuts or screws. Do not use an electric screw
gun during installation unless equipped with a torque adjuster.
The maximum torque on the cylinder screw is 2Nm.
- Set and test user and master password prior to installing the lock
- Change all default passwords with your own passwords.
- Common sense, but we must say it... Do not keep the passwords in
the cabinet where the lock is being installed!
- It is not possible to open lock if installed and you forget the user and
master password.
- Lock gives a warning beep when incorrect passwords have been
entered in repeatedly.
- Not possible for front side of lock to be opened by breaking or trying
to force open lock.
- Use CR2450 3.0V Lithium batteries.
- Remember that battery consumption is high when programs 2, 3,
and 7 are active.
Password / card
is accepted
Green LED blinks with 2 repeated audio warnings.
Wrong password
/ card
Red LED blinks with 4 repeated audio warnings.
Low batterty Red LED blinks 5 times after each operation.
Lock is open 8 audio warnings heard at every second (K10m) / every
5 seconds (K10p) after one minute of opening the lock.

Page 17
CHANGING THE BATTERY:
Remove the battery cover on the back of the lock with a screwdriver.
Remove the battery from compartment and replace it with 1 new 3V Lithium
CR 2450 button battery.
If the battery is about to run out, the red light starts to ash immediately after
the on/off operation. After this warning, the lock can be opened and closed
100-150 times.
BATTERY FAILURE OVERRIDE: (If the lock installed to locker)
Remove the caps from the holes of Red and Green leds, insert the pins
of the miniK10 Power Adapter into these holes and press. When the lock
wakes up, enter your password and unlock it.
ATTENTION!
In case of any failure, inform the vendor in writing of the detailed description
of the failure. In case of any intervention in the device, such as attempting to
repair the device, the device gets OUT OF WARRANTY.
LIMITED WARRANTY:
VEMUS Ltd. offers a one year limited warranty all products to be free from
manufacturing defects in materials and workmanship. This warranty does
not cover the battery, lost combinations or damages caused by improper
mounting, improper or unreasonable use.
LIABILITY LIMITS:
This is a limited warranty and is in lieu of all other warranties (including
the implied warranties of merchantability and tness for use) and under no
circumstances shall VEMUS be liable for any incidental or consequential
damages or losses.
CAMS:
- Two cams are included
- Cams can be placed at
increments of 90 degrees
- The Stop Cam (#3) in installation
instructions can be positioned for
turning the cam clockwise or counter-
clockwise
Cam
Placement
7/8” Straight Cam
22mm
1-1/2” Straight Cam
38mm

Page 18
Thank you
Congratulations for making this eco-friendly choice!
By purchasing a miniK10m / miniK10p, you will prevent addi-
tional batteries going to the landlls over the up to 5 years. With
its smart technology, the miniK10m / miniK10p only requires
one battery over a 5 years period. This period may be reduced
according to battery performance, environmental conditions and
frequency of use.
MAINTENANCE:
- Clean front of lock with a mild damp cloth with detergent if needed.
- Use only Ethanol (Ethyl Alcohol) for disinfecting.
- Do not use any hard or scratching cleanser.
- Do not clean with chemical materials that melt plastic (thinner,
acetone, etc.)
- Be careful not to spill water on lock.

QUICK INFO
LOCKING / UNLOCKING WITH USER CARD
LOCKING / UNLOCKING WITH MASTER CARD
If cardless personal operation option or cardless locker mode operation option is selected,
you should press button at rst to lock and unlock by using the master card.
VEMUS Ltd. Şti. can make changes about the qualications of the product without informing in advance.

Vemus Endüstriyel Elektronik San. Ve Tic. Ltd. Şti.
NOSAB Zeytin Cad. No:14 16220 Nilüfer/BURSA - TURKEY
+ 90 224 411 10 30
+ 90 224 411 10 31
, and are trademarks of VEMUS Endüstriyel Elektronik Ltd. Şti.
www.kilitronik.com
Hospitals
Spa
and
Baths
Schools
In
Mailboxes
Sports Halls
Staff Lockers
Rev.05 10/2021 011 580 0761