VENCE TUDO SA 7300 User manual
1
SA - HIDRÁULICA Super Série
2SA - HIDRÁULICA Super Série
3
SA - HIDRÁULICA Super Série
The Industry of Agricultural Implements VENCE TUDO was founded in 1964 in
Alfredo Brenner, District of Ibirubá in Rio Grande do Sul. It has been following a mission
determined by the founder Nelson Lauxen, which is to look for the agricultural development
indefatigably, through resistant agricultural implements, of easy handling, with great quality
and productivity earnings for the farmer.
VENCE TUDO, as years go by, from generation to generation has led faithfully
this mission; seeking to develop its products from the users’ needs by partnerships with
universities, research centers and with its engineering group; constantly improving its
products in the most technologically advanced concepts.
After being developed by the company, the products are exhaustively tested for
months, by the farmers themselves in the most different regions, being placed under several
use conditions, to evaluate their resistance and functioning level. After the product has
been approved in its eld tests, it will start to be produced on a large scale to the market
within the most modern industrial and quality control methods.
The customer’s satisfaction with VENCE TUDO products is our main concern.
The purpose of this manual is to familiarize you with the equipment functioning
and with a little care so it lasts a long time, without problems. In addition, as important as
learning to take care and handle it correctly is to know some aspects that may compromise
with the warranty, due to negligence, bad use, not authorized adaptations that you may
have. This way, we advise the careful reading of the Warranty Certicate.
The parts catalogue contains all the necessary information for parts replacement.
The correct interpretation of this manual, will give you conditions to do the necessary
replacement according to the equipment models identied and described.
If any doubts come over during any work operation, get in touch with VENCE TUDO
LTDA; therefore, we can solve your doubts through the CUSTOMER TECHNICAL ASSISTANCE
so that we can improve our customer service, being sure of a strong relationship between
VENCE TUDO and YOU.
We take the opportunity to congratulate you on having chosen a VENCE TUDO
product, and we can assure that we have great interest in satisfying you.
VENCE TUDO
Industry, Trade, Import
and Export Ltd.
PRESENTATION
4SA - HIDRÁULICA Super Série
TO THE VENCE TUDO CUSTOMER
Farming friend, you are from congratulations when acquiring a product VENCE
TUDO; the development of our products is based mainly on the user’s satisfaction.
Your satisfaction in the hour of picking the prots generated through our implements
is ours also. Our thought is to assist with the largest seriousness and our trust partner,
you farmer, because it is through your protability that we are in no doubt of building
a strong and lucrative agriculture.
For a production inside of the considered concepts of the high agricultural
technology this product was developed. The most modern equipment is used for the
industrial manufacture, aiming at the development of a strong and resistant product,
which it comes to take care of your needs, with high durability and long useful life.
5
SA - HIDRÁULICA Super Série
GUARANTEE #______
CONDITIONS
1- The product has warranty on any registered fabrication defect, as long as all the parts and
components have been supllied by VENCE TUDO Limited, and delivered by duly authorized companies or people;
2- The parts and/or components covered by the warranty will only be replaced or compensated
if defects are veried by the Technical Assistance or by a person duly authorized by VENCE TUDO Limited.
Parts which suffer slow wear and tear, because of operational conditions and factors relate to formation and
characteristics of each soil are excluded. The presentation of the technical delivery certicate correctly lled
up and the purchase bill are essential.
3- If the conditions of the Warranties Terms are satised, VENCE TUDO Limited assures the repair
of the defect or component’s replacement, for free. In case of canceling or expiration of the warranty terms,
the technical assistance will be charged by the price of the service rendered and reposition of parts and
components, if necessary.
WARRANTY CANCELLATION
The warranty loses its effectiveness in the following cases:
- Damages caused to the equipment by bad use, abuse, negligence or lack of apropriate maintainance, in
disagreement with the manufacturer’s instructions published in the corresponding operation manual;
- Damages caused by accidents or natural agents;
- Repairs, modications or violation of parts and components performed by a non-authorized person.
- Amendments, erasures or exclusion of data in the Technical Delivery certicate, in the Warranty certicate,
in the purchase bill or in the identication plaque.
IMPORTANT
If your product shows any problem during the warranty period, contact exclusively your
retailer or the manufacturer. The same only should be repaired or dismounted in the presence of a
person duly accredited by the manufacturer, as well as the use of original replacement parts, under
penalty of warranty loss.
KEEP THE PURCHASE BILL IN A SAFE PLACE, IT IS THE PROOF OF THE WARRANTY TERMS.
CUSTOMER:___________________________________________________________
ADDRESS:_____________________________CITY: _______________ STATE: ____
MODEL: _____________________________SERIES:_______________ YEAR:_____
DELIVERY DATE: ____/____/_____
RETAILER: ____________________ CITY: ___________________STATE: _______
I declare faithfully and with incontestable effect that I received, on this date the PRODUCT
model:_______________________________________ as it is above specied in perfect conservation conditions
and the warranty model used was accepted by me.
CUSTOMER: _____________________________________________________________
RETAILER: ______________________________________________________________
TECHNICAL DELIVERY CERTIFICATE NUMBER:_______
CUSTOMER: __________________________________________ CITY: _________________________
ADDRESS: _______________________________________________________ STATE: ___________
MODEL: ____________________________________________ SERIES: ________________________
RETAILER: __________________________________________ CITY: __________________________
Purchase bill number: _________________________________ Sale’s date: _____/_____/_____
REMIT THIS CERTIFICATE TO THE FACTORY SOON AFTER DELIVERY.
The warranty of VENCE TUDO products is assured to the acquirer for the period of one year
since the acquisition date, against manufacture or material defect that may cause the operational
danger of the product, except for components acquired from mediators, which have their own
manufacturer’s warranties.
6SA - HIDRÁULICA Super Série
I declare having received on this date, the model described previously, according
to the specications above in perfect condition and that the warranty modality is accepted
by me.
DATE: ____/____/____
CUSTOMER: ____________________________________
DELIVERY DATE: ______/______/______
7
SA - HIDRÁULICA Super Série
ÍNDICE
8SA - HIDRÁULICA Super Série
9
SA - HIDRÁULICA Super Série
When need to replace any parts, always use original VENCE TUDO parts. To make the iden-
tication of each part easier, see the PARTS CATALOGUE.
The Agricultural Implements Industry VENCE TUDO LTDA. in constant improve-
ment, reserves the right to at any time to introduce changes in their products to best to
meet the needs and expectations of their customers; without the obligation of doing the
same on the previously sold products.
When getting in contact with the VENCE TUDO Technical Assistance Service, please inform
the following data: MODEL, manufacture YEAR and SERIAL NUMBER of the product. These data are
located in the product’s Identication Plate, xed on the chassis, always on the left side.
All the information in this Operation Manual is liable to alteration. Weight, dimensions
and specications are only approximate, and the illustrations do not reect, necessarely, the
equipment in its standart condition. To obtain exact information about any specic model,
please contact your VENCE TUDO retailer.
IDENTIFICATION
10 SA - HIDRÁULICA Super Série
CARE WITH THE ENVIRONMENT
IMPORTANT
Mr. User !
Let us value nature.
The uncontrollable spilling of residues on the soil
and in the water harms the life of all living beings of the
planet.
To spill on the soil and in the water lubricating
and combustible oils, agrichemical and plastic packings,
etc, interferes directly with ecosystem balance from the
supercial layer of the soil the underground sheets of water.
Do the appropriate handling of these residues,
nding out how to recycle them or to reuse them.
Acting that way you will be contributing to the
conservation and the balance of the ecosystem.
The straw cuting is a fundamental factor for the efciency in the planting
and establishment of the crop. In no may use handling methods that are not
recommended by the technical assistance.
Avoid burning: burning the straw is a crime against the ecosystem,
because life on earth depends on it.
Use the straws chopper well regulated and if necessary change the
razors.
Use the straws spreader to maintain the uniformity of distribution of
the straw layer.
If necessary use straw crushers.
Avoid the use of disk grid in the straw rolling.
11
SA - HIDRÁULICA Super Série
SAFETY RULES
- Avoid falls. Keep the access to platforms
clean. Use the supports to go up. - Stay away when the equipment is in
operation.
- Don’t open the protections until all the
mechanisms have stopped.
- The contact with dented wheels and
chains in operation can cause serious
accidents. Stop the motor to avoid
wounds.
- Removed people close to the operational
area;
- Has knowledge and practice in the safe
use of machines, its controls and its
work place.
- Read and understood the operation
manual of the product;
- The improper operation of this equip-
ment can cause serious wounds or
death. Before using it, be sure that
the operator.
- Was instructed for safe and appropriate
use;
12 SA - HIDRÁULICA Super Série
THIS INDICATIVE SYMBOL SHOWS SITUATIONS OF SE-
CURITY IN THIS OPERATION MANUAL. OBSERVE AND READ
WITH ATTENTION THE MESSAGES TO PREVENT PERSONAL
ACCIDENTS.
Only people with the complete knowledge of the tractor-seeder group should ope-
rate it and to do repairs in the components and kits; with the maximum security;
The farmers should follow the recommendation on the use of chemical products in
doses recommended by the manufacturer and the responsible agronomist always.
People, animals and the environment can be affected by excess and the bad use
of chemical substances;
Keep arms and legs away from cutting discs and furrowers, because these can
cause serious wounds;
Keep in your mind always: that a careful and responsible operator is the best sa-
fety against accidents;
Safety demands attention, caution, concentration and prudence during the trans-
port, planting, maintenance and storage operations. In addition, this should be
kept in your mind all the time;
Only the presence the tractor’s operator is allowed to keep on; during the trans-
port operations and operation of the tractor-seeder group;
Do not allow any children to play close to or on the equipment; during the main-
tenances, transport, operation and storage;
Wear appropriate clothes and shoes before and during any type of operation.
Avoid wearing wide clothes that can be twisted by moveable parts of the seeder;
Have complete knowledge of the land, where you will work with the seeder. In
case, it is necessary, demarcates the place in possible dangerous points that can
put in risk the life of the operator and your work safety;
Appropriate speeds during the plantation, transport and maneuvers with the see-
der should be used all the time. High speeds can cause damages to the kits, and
still can put in risk people and animals lives;
Never work without the protection devices and safety;
13
SA - HIDRÁULICA Super Série
Have the maximum of care when making the coupling of the tractor to the seeder.
Do not allow anybody to stay between the seeder and the tractor;
Be sure that there is not anybody or animals close to the seeder neither whenever
you lift nor lower it to the ground;
Never try to alter the adjustments, to clean, to lubricate or to remove any material
from inside the seeder; when it is in movement;
Keep the access platform to the seeder clean always and free from oils and greases;
Always turn the engine off before leaving the tractor’s seat and be sure that the
parking brake was applied;
Work with the seeder always in the speed and potency suitable;
Be moved with caution and attention in narrow places;
Do not travel on roads or highways, mainly during the night. You should use signs
of alert and forerunners, when make long travels with the machine;
When decoupling the seeder, make this in plane and rm place. Be sure that the
seeder is very leaning and rm on the ground before accomplishing the decoupling;
Be sure that there is not anybody close to the seeder or tools left inside theirs
hoppers, before operating it;
Keep the shield plates in their places;
Read the OPERATION’S MANUAL, before any operation and follow the warnings
xed on the machines;
After repairs, be sure that all the parts are running correctly;
Do not transport the seeder loaded. Fill it, when it is in the eld.
14 SA - HIDRÁULICA Super Série
BASIC FEATURES
Crop Soy Corn Wheat/Rice Native Field Soy Wheat/Rice Native Field
Number of Rows 3 2 7 5 4 3 2 9 7
40 55 17 22.5 40 55 80 17 22.5
42.5 60 19 25 42.5 60 85 19 25
45 65 - - 45 65 90 - -
47.5 70 - - 47.5 70 - - -
50 75 - - 50 75 - - -
-80 - - - - - - -
-85 - - - - - - -
-90 - - - - - - -
Seed Capacity Lts
Seed Capacity Kg
Fertilizer Capacity Lts
Fertilizer Capacity Kg
Pastures Lts - - -
Pastures Kg - - -
Recommended Speed Km/h 6 to 8 4 to 6 6 to 8
Weight kg 720 589 555 615 808 677 546 573 636
Minimum Power Motor 45 60 45 55 85
Tire Gauge
Work Pressure
Wheel Perimeter
7 to 9
2822
15 19
7 to 9
35
-
-
35
4 to 6
Row Spacing in cm
SA 7300
Corn
SA 9400
222
113
84
31/Row
25/Row
198
302
31/Row
25/Row
147
109
270
TECHNICAL SPECIFICATIONS SA-H
20 Pounds/Inch
1,81m (Perimeter with base in the nominal high of the pneumatic)
500/12
TECHNICAL SPECIFICATIONS
NOTE:
- The dimensions, weights and capacities; as well as of any other information shown in this manual, are subject to changes at any
time without prior notice.
15
SA - HIDRÁULICA Super Série
BASIC FEATURES
Crop Soy Wheat/Rice Soy Wheat/Rice Wheat/Rice
Number of Rows 543 11 643 14 7654 17
40 50 60 17 42.5 60 85 17 40 50 60 75 17
42.5 55 65 19 45 65 90 19 42.5 55 70 80 -
45 60 70 -47.5 70 - - 45 - - 85 -
47.5 -75 - - 75 - - 47.5 - - 90 -
- - 80 - - 80 - - - - - - -
- - 85 - - - - - - - - - -
- - 90 - - - - - - - - - -
--- - --- - ---- -
Seed Capacity Lts 182 226 297
Seed Capacity Kg 136 117 212
Fertilizer Capacity Lts
Fertilizer Capacity Kg
Pastures Lts - - - - - - - - -
Pastures Kg - - - - - - -
Recommended Speed Km/h 6 to 8 7 to 9 6 to 8 7 to 9 7 to 9
Weight kg 1110 979 848 810 1303 1040 909 927 1618 1444 1270 1096 1194
Minimum Power Motor 55 45 35 65 65 45 35 75 80 75 70 65 85
Tire Gauge
Work Pressure
Wheel Perimeter
25/Row
-
-
-
-
Corn
Corn
Corn
Row Spacing in cm
31/Row
31/Row
31/Row
Soy
TECHNICAL SPECIFICATIONS SA-H
SA 11500
SA 14600
SA 17700
500/12
20 Pounds/Inch
1,81m (Perimeter with base in the nominal high of the pneumatic)
-
4 to 6
4 to 6
4 to 6
6 to 8
25/Row
333
396
468
373
444
525
25/Row
NOTE:
- The dimensions, weights and capacities; as well as of any other information shown in this manual, are subject to changes at any
time without prior notice.
16 SA - HIDRÁULICA Super Série
MODELOS A B C D E F G H I J
SA 7300 1840 1400 400/900 800/1000 1840 1340 1460 1420 - -
SA 9400 2310 1840 400/900 1200/1500 1840 1340 1460 1420 - -
SA 11500 2680 2200 400/900 1600/1860 1840 1340 1460 1420 - -
SA 14600 3220 2740 400/900 1850/2375 1840 1340 1460 1420 - -
SA 17700 3800 3220 400/900 2250/2820 1840 1340 1460 1420 3930 1630
MODELOS A B C D E F G H I J
SA 7300 1840 1400 170/190 1020/1140 1840 1430 1460 1420 - -
SA 9400 2320 1840 170/190 1360/1520 1840 1430 1460 1420 - -
SA 11500 2680 2200 170/190 1700/1900 1840 1430 1460 1420 - -
SA 14600 3220 2740 170/190 2210/2470 1840 1430 1460 1420 - -
SA 17700 3800 3220 170 2720 1840 1430 1460 1420 - -
WINTER:
SUMMER:
Basic Dimensions
17
SA - HIDRÁULICA Super Série
General Characteristics
COUPLING: Through the three-point hitch of the tractor.
CHASSIS: Monoblock type.
WHEELED: It is composed of wheels with 100 mm free travel. Flanged rims, attached by screws,
form this wheeled and special tires 500/6-12” model too.
FERTILIZER HOPPER: Modulated. Built in anti-corrosive structural polyethylene of medium density.
SEED HOPPER: Individually assembled in each planting line, in medium density polyethylene.
FERTILIZER METERING MECHANISM: Mechanical feeder type rotor carrier with adjustment
millimeter self-cleaning driven by endless worm.
SEED METERING MECHANISM: The horizontal mechanical feeder consists of metal plate and
horizontal drilled discs. The mechanical feeder runs through uted rotor with continuous ow system
for ne seeds.
TRANSMISSION RELATION: It is carried out through of an arrangement of the transmission
sprockets.
CUTTING MECHANISM OF THE STRAW: A vertical cutting disc with side oscillation composes it,
and its pressure comes through of a helical spring pre-tensioned by threaded element (S.S.).
PLACER AND CONVEYOR MECHANISM OF THE FERTILIZER: It is a furrower opener knife-type
with replaceable point and safety fuse. It has adjustments for different depths. Its work pressure is
obtained through of the action of helical springs.
SEED PLACEMENT: The seed placement system is made by means of two discs assembled in “V”
shape defased with different diameter and curved conveyor. The work pressure is obtained through
the helical springs.
SEED / FERTILIZER PLACEMENT (WHEAT): The fertilizer/seed placement (wheat) system is made
by means of two discs assembled in “V” shape, defased and curved conveyors for a better deposi-
tion the seeds and fertilizer. The work pressure is obtained through the action of the helical springs.
LIMITER / COMPACTOR MECHANISM: It has free depth control wheels in “V” shape; furthermore,
the 3rd press wheel is coating exible rubber.
COVERING MECHANISM: Two 12” concave discs in “V” shape compose it, which are responsible
by covering of the furrow where the seeds are deposited helping in the emergence of them. The
work pressure is obtained through increasing the pressure in the helical spring.
18 SA - HIDRÁULICA Super Série
GENERAL INFORMATION
1 – When receiving your seeder, check the product’s conditions and the attachments box.
This is of great importance; mainly in relation to the use of original components;
2 – The right and left-hand is considered taking into account that the observation of the
machine is made backwards ahead;
3 - To withdraw any plantation kit for the placing on the other, it must be always careful
to separate the parts withdrawn with their respective components or parts. Thus, those
parts are not used in other machines or equipments of your property;
4 – Due to the seeder design to be with internal tires, the minimum spacing among the
wheels is of 450 mm for all of the models;
5 – The crop of the soybean is used in this manual, identifying the operations for the
summer crops, as corn, sorghum and others.
6 - The disposition of the planting lines varies in accordance with the seeders models. Be
sure that is making the assembly or maintenance of the correct model.
19
SA - HIDRÁULICA Super Série
01- HANDRAIL
02- FERTILIZER RESERVATION
03- CHASSIS
04- CUTTING DISC STRAW SYSTEM
05- FURROW OPENER KNIFE AND FERTILIZER CONVEYOR
06- SEED PLACEMENT SYSTEM
07- WHEELED
08- SEED RESERVOIR
09- COUPLING
10- TRANSMISSION RELATION
11- SELF-CLEANING FEEDER (METER)
12- COMPACTION SYSTEM
13- ROW MARKER
COMPONENTS IDENTIFICATION
SUMMER VERSION
20 SA - HIDRÁULICA Super Série
01- CHASSIS
02- SEED FEEDER MECHANISM
03- SEED RESERVATION
04- FERTILIZER RESERVATION
05- HANDRAIL
06- COMPACTOR
07- SEED PLACEMENT SYSTEM
08- WHEELED
09- SUPPORT STAND
10- TRANSMISSION RELATION
COMPONENTS IDENTIFICATION
WINTER VERSION
This manual suits for next models
4
Table of contents
Other VENCE TUDO Farm Equipment manuals
