Venso EcoSolutions Smart Eco Timer SET012 Installation and operating instructions

Manual & Installation Guide
Smart Eco Timer
SET012
English

Guarantee conditions
Thank you for choosing an Venso EcoSolutions product. These products are developed for us by Revogi
Innovation Co.,Ltd. They are carefully tested and inspected to ensure correct function and operation.
Guarantee conditions
Your product is covered by a 2-year guarantee. The guarantee is valid from the date of purchase as shown on
your receipt. To make a guarantee claim, please contact the reseller from whom you purchased the product.
Exception from the guarantee commitment
The guarantee will be invalid in any of the following events:
•if the product has been connected to a dimmer
•if the product has been connected to the wrong voltage or to a dimmer control device
•if the product has been used outside the recommended temperature range
•if the product has been subjected to mechanical damage, e.g. dropped on a concrete oor
•if the product has been dismantled for troubleshooting/repairs
Read the user instructions before using the product. Save the instructions for future reference.
Safety instructions
Before installing the light, you must read and follow these instructions:
•The product is NOT intended for outdoor use
•temperature range -20°C – +40°C
•make sure your hands are dry during installation
•take care when connecting to avoid electric shocks
Technical specications:
Model SET012
DimensionS WxLxH 54,7 x 54,7 x 71,5mm
Weight 92g
Input 220-240V~, 50Hz/16A
Output 220-240V~, 50Hz/16A
Power 0-4113W
Overcurrent protection 16,8A
Rated current 16A (6mA operating current)
IP Certication IP 20
Communication Bluetooth 4.0 Low Energy
Range 15m
System required Android 4.3+, iOS 8+
Downloads:
App Store
https://apps.apple.com/cn/app/meterplug/id937072333
Google Play
https://play.google.com/store/apps/details?id=com.revogi.meterplug

Smart Eco Timer
Automatic bluetooth timer
Smart Eco Timer, is a BLE (Bluetooth 4.0) based smart timer, used to control the on-o󰀨 status of any
connected electrical appliance. It is ideal for controling a grow light according to a desired lighting schedule.
In addition it can be used to monitor the power consumption of the connected appliance. To alter the setings
and monitor the status of the smart eco timer, a smartphone or tablet is used.
Status Description
LED Indicator On The appliance is turned on
O󰀨 The appliance os turned o󰀨
Power button Push Works as a physical switch to
turn the power on /o󰀨
Power buon
LED indicator
Installation
1. Download and install the SmartMeter App
The Smart Eco Timer comes with a pre-programmed schedule suitable for a general grow light setting. It
is set to turn on at 06.00 h, and turn o󰀨 at 22.00 h. In order for the Smart Eco Timer to set the local time it
must be connected with the SmartMeter bluetooth app the rst time it is used. No other setting is required.
The pre-programed schedule can of course be changed to any desired values.
2. Plug into power outlet
3. Run the Smart Meter app
Scan the QR-code with your smart device, or search
”Revogi Smart Meter” on google play/Apple store and
install the ”Smart Meter” app.
Plug the Smart Eco Timer into the power outlet, then plug
your appliance to the Smart Eco Timer.
Make sure Bluetooth is turned on, on your smart device
and start the Smart Meter app. The Smart Eco Timer will
be automatically paired with the smart phone/tablet and
ready to be used.
Enjoy!
Product description

The Smart Eco Timer Interface
When you open the SmartMeter app it starts by searching for devices
(Smart Eco Timers) nearby. After it succesfully nds one or more
devices it will show a list of connected devices. Here you can change
the settings of your device.
App Settings
Push the settings wheel to enter the app settings. In the app
settings you can change the locale settings, for example the
language and currency.
Device Settings
To enter the device settings, push and hold the device name, then push
the Settings menu item. In the device settings you can change the
settings for each of your connected devices:
Name and Icon: You can change the name and icon of the
connected device.
Firmware Version: Check the rmware version.
LED Indicator: You can choose not to have the green LED lit
when an appliance is turned on.
Anti-burglar mode - Turn on to activate the Anti-Burglar mode.
This will randomly turn on/o󰀨 your device in a desired time interwall
when you are out of home.
Factory Settings Reset: If any problems should occur you can
reset the device to the factory default settings, all entered data will
be erased and set to the factory default settings.
Add new devices
The SmartMeter app can control up to 10 Smart Eco Timer plugs at
the same time. So when other new Smart Eco Timer plugs are applied,
please tap ”Find Devices” to add a new Smart Eco Timer to the app.
Power
Push the power icon to turn the device on or o󰀨.
The SmartMeter app is sear-
ching for new devices...
Devices screen
Device
App Sengs
Power

Power
ON - Tap ”ON” to turn o󰀨 the Smart Meter Plug.
OFF - Tap “OFF”” to turn on the Smart Meter Plug.
Energy
Day - Tap to show the power consumption of your electronic device in
the past 24 hours.
Week - Tap to show the power consumption of your electronic device
in the past week.
Month - Tap to show the power consumption of your electronic device
in the past 30 days.
Timer
Tap into the timer interface, set the time and start the countdown.
Schedule
The Smart Eco Timer comes with a pre-programmed schedule suitable
for a general grow light setting. It is set to turn on at 06:00, and turn o󰀨
at 22:00.
Edit rules - Tap the rule to enter the “Edit Rules” interface. In this
interface, you can change the settings for the selected rule:
Power: Chose whether the device is to be on or o󰀨
Time: The time the rule applies
Repeat: Weekdays the rule applies
Tap ”Save” when nnished.
Add rule - Tap”+” in the top right corner, to add a new rule.
Delete rule - Slide a rule to the left, a “Delete” icon will appear, tap it to
delete the rule.
Show the real-me power consumpon of the connected appliance.
Graphs of daily, weekly, monthly and yearly power consumpon history.
Set the countdown to turn on/o the smart eco mer.
Set rules to turn on/o your applicance at certain me.
To enter a device, short-push the device name. You will then be able to
choose 4 diferent screens:
The actual power
consumpon displayed
Devices screen
Device
The Schedule. On set to
06:00 and O set to 22:00.
Device settings

Distributor and Head o󰀩ce:
VENSO EcoSolutions AB
Ögärdesvägen 21 Tel: [phone]
SE-433 30 PARTILLE E-mail: [email protected]
SWEDEN Website: venso-ecosolutions.se
Distributor German speaking countries:
VENSO EcoSolutions GmbH
Unterer Hammer 3 Tel.: [phone]
D-64270 Michelstadt E-Mail: [email protected]
GERMANY Website: venso-ecosolutions.de