Vents-us VK PS 100 User manual

MIU_14_(VK_PS)EN-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [email protected]
INSTALLATION GUIDE
Tools required
Pencil Drill Ø6 mm Screwdriver Dowel 4 pcs NTW 6/35 Screws 4 pcs 4/35
MOUNTING
INLINE CENTRIFUGAL FAN
VK PS 100
VK PS 125
VK PS 150
Installation of the fan with direct air discharge to outside requires a device that prevents air backdraft: backdraft damper, a grille with shutters or a ventilation hood.
Otherwise the fan may be spontaneously turned on by the pressure created by blown in wind from outside.
Typical Fan installation
Lint Trap
VK PS
Install a lint trap between the clothes dryer and the
fan to increase the service life and maintenance
periodicity of VK PS. Clean the lint trap as required.

MIU_14_(VK_PS)EN-01
www.vents-us.com
Vents-US
400 Murray Road, Cincinnati, OH 45217, USA
Tel: [phone], Fax: [phone]
E-mail: [email protected]
1. Mark fastening holes 2. Drill fastening holes
3. Install the sensor 4. Fix the fan to themounting surface with screws
5. Connect air ducts and silicone tube 6. Connection of the fan
120
VAC, 60 Hz
BREAKER
GREEN
GROUND
SCREW
BREAKER BOX
EARTH
FAN
WALL SOCKET