Vents-us TT SILENT M 100 User manual

www.ventsus.com MIU_07-01
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: [phone]
e-mail: [email protected]
INLINE MIXED-FLOW FANS IN SOUND-INSULATED CASING
TT SILENT M 100/125/150/160/200/250/315
INSTALLATION GUIDE
Tools required
Pencil Drill Screwdriver Dowel (4 pcs.) Screws (4 pcs.)
MOUNTING
While mounting the fan provide extra protection against water ingress.
Сonnect an air duct on both sides of the fan .
We recommend minimum 40’of insulated exible duct between any exhaust grill and fan for low noise level. .
3
2
minv40vinch minv40vinch

www.ventsus.com MIU_07-01
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: [phone]
e-mail: [email protected]
1) Disconnect the fan from power supply.
2) Mark holes on the wall.
3) Drill the holes and insert the expansion anschors.
4) Fix the fan.
5) Connect air ducts
5
5
2
3 4
QF
1
Connection of the fan and standard wall socket
120VAC, 60Hz
GREEN
GROUND
SCREW
WALL SOCKET
EARTH
BREAKER
BREAKER BOX

www.ventsus.com MIU_07-01
Bodor Vents, LLC DBA: VENTS-US
11013 Kenwood Road Cincinnati, Ohio 45242
Phone: [phone]
e-mail: [email protected]
The fan must be connected using durable, insulated and heat-resistant cables and wires.
1) Disconnect the fan from power supply.
2) Remove the cover from the terminal block.
3) Remove the cable clamp.
4) Connect the cables according, install the cable clamp.
5) Install the terminal block cover
6) Сonnect the fan from power supply.
ТТ Silent-М 100/125/150
123
456
N
L
N
L
QF X
~120V 60Hz
PE
ТТ Silent-М 200/250/315
12 3
456
N
L
N
L
QF X
~120V 60Hz
PE