1785-190821ENSubject to misprints, errors and technical modifications. 1
MEASURING INSTRUCTION SCREEN V585 – SCREEN V595
The best preparation!
Take the following points into account before you order a screen.
1. How will the screen be installed?
You can choose:
AOutside mount / Installation on the wall – the box and guides are installed on the wall (see page 2).
BInside Mount / Installation between two walls – the box and guides are installed to the window frame
between two walls (see page 3).
CCombination of A and B – the box is installed on the wall and the guides between two walls (see page 4).
3. How do I measure the correct height of the placeable screen?
2. How do I measure the correct width of the screen?
Measure the width (X) between the walls in mm.
To be sure, do this at least at three positions; the wall can be skewed.
AOrder width (W) = the largest measured width (X) + 60 mm
BOrder width (W) = the smallest measured width (X) - 10 mm
COrder width (W) = the smallest measured width (X) - 5 mm
Measure the height (Y) from top to the bottom of the windowsill in mm.
To be sure, do this at least at three places.
Aen C
Standard screen:
Order height (H) = the largest measured height (Y) + 85 mm
Standard XL screen:
Order height (H) = the largest measured height (Y) + 95 mm
BOrder height (H) = the smallest measured height (Y) – 5 mm
Important!
Also attentively read the attention points on page 6 and 7 to see if they apply to you.
4. Choosethecontrolside:leorright?
Stand in front of the window frame on the outside. Determine if you want the control the screen on the le or right side.
