VERDER Carbolite Gero Chessell 6100A Manual

Installation, Operation and Maintenance Instructions
Controller Manual
Chessell 6100A
Chessell 6100A
MEN-CHESSELL6100A (02-01-2018)

Contents
This manual is for guidance on the use of the Carbolite Gero product specified on the
front cover. This manual should be read thoroughly before unpacking and using the
furnace or oven. The model details and serial number are shown on the back of this
manual. Use the product for the purpose for which it is intended.
1.0 Quick Start Guide for Download 3
2.0 Quick Start Guide for Setting Time Clock 9
3.0 Software Guide 15
2

1.0 Quick Start Guide for Download
1. Press Logged out.
2. Press User ID Logged out.
3
1.0 Quick Start Guide for

1.0 Quick Start Guide for
3. Press Engineer.
4. Press Password.
4

5. Press Numeric.
6. Type in 100, press OK.
5
1.0 Quick Start Guide for

1.0 Quick Start Guide for
7. You are now in the Engineer page.
8. Press the small boxes in the right hand corner.
9. Press Operator.
6

10. Press Archive
11. Press Local
12. Enter USB into slot behind flap.
7
1.0 Quick Start Guide for

1.0 Quick Start Guide for
13. Press for required detail.
14. Green box showing downloading, do not remove.
8

16. Return to normal operation.
2.0 Quick Start Guide for Setting Time Clock
1. Press Logged out.
9
2.0 Quick Start Guide for Setting

2.0 Quick Start Guide for Setting
2. Press User ID Logged out.
3. Press Engineer.
10

4. Press Password.
5. Press Numeric.
11
2.0 Quick Start Guide for Setting

2.0 Quick Start Guide for Setting
6. Type in 100, press OK.
7. You are now in the Engineer page.
8. Press the small boxes in the right hand corner.
12

9. Press Operator.
10. Press System.
11. Press Clock
13
2.0 Quick Start Guide for Setting

2.0 Quick Start Guide for Setting
12. Press Current Date / Current Time.
13. Entre Date / Time, press OK.
14. Press Apply.
14

15. Press Home.
3.0 Software Guide
1. Open the Review software via Start Menu/All Programs/Eurotherm/Review.
The program window will open.
15
3.0 Software Guide

3.0 Software Guide
2. To import data from a USB drive, go to File/Transfer/From Removable Media… from
the Menu bar.
3. When the transfer window opens, select the drive letter that corresponds to the USB
drive containing the required data.
If the data is to be left on the USB drive ensure that the ‘Delete source files…’ check
box in not ticked.
4. The Comms Log shows what data has been imported. Once the transfer is complete
the window can be closed.
16

5. Click on the New Chart button.
6. On the Chart Setup window click on the Add Point button located towards the botton
left.
7. On the Select Point window ensure that Instrument is set as OPSTAT and Log Group
is set as LGROUP. Then click on the Add All button to return to the Chart Setup window.
17
3.0 Software Guide

3.0 Software Guide
8. The Chart Setup window will now show data in the Point ID window. Click on the OK
button to return to the Review main window.
9. The Review window will now show a chart of all the data that has been imported.
18

10. To jump to a certain part of the chart, select Chart/Go To… from the Menu bar.
11. From this window you can select either a Batch or a time range to view.
12. To export data in CSV format go to File/Export… from the Menu bar.
19
3.0 Software Guide

3.0 Software Guide
13. From the Export window you can select the data to be exported and whether to
Copy to Clipboard or File.
Click on the Copy To File button to export the data to a CSV file.
14. On the browse window that comes up select where you want to save the file and
name the file with a ‘.CSV’ extension e.g. example.csv
20