Verilux VM03 User manual

VM03

3
CAUTION:
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
DISMANTLE. THERE ARE NO SERVICEABLE PARTS INSIDE.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
PERSONAL INJURY:
• Do not place near sink or where water can splash on the mirror.
• Turn off or unplug and allow to cool before replacing bulb or cleaning.
• Do not operate the mirror in close proximity to flammable or
combustible vapors such as aerosol (spray) products or where oxygen
is being administered.
• Use only the type of bulb and maximum wattage indicated by Verilux®.
• Never cover the product when it is in operation.
• Read these instructions – before using this product.
• For indoor use only.
• Clean only with dry cloth.
• Do not defeat the safety purpose of the polarized plug. A polarized
plug has two blades with one wider than the other. If the provided plug
does not fit in your outlet, consult an electrician for replacement of the
obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at
the plugs and the point where it exits from the mirror.
• Unplug this product during lightning storms.
• If the product has been damaged in any way, such as the power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen
onto the product, the product has been exposed to rain or moisture,
does not operate normally, or has been dropped, it should not be
operated.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS

4
BULB REPLACEMENT
Replacing the Natural Spectrum®bulb:
1. Unplug the power cord from the electrical receptacle.
2. Remove three Philips screws from the sides and
bottom of the 10X magnification side of the mirror.
3. While mirror is lying on its side, carefully remove the
mirror panel and lay it over to expose the bulb and
wire.
4. Carefully detach the plug from the 4-prong bulb
connector.
5. Undo the plastic tie holding the bulb connector plug
in place.
6. Pull up on the bulb to release it from the 3 clips
holding it in place and dispose of the old bulb in
accordance with local and federal requirements.
7. Place new bulb in clips, re-connect power cord,
re-tie plastic tie holding the bulb connector plug in
place, replace 10X mirror panel, and replace the
3 screws.
Important:
Open Magnified (10x)
Side for bulb replacement

5
BULB REPLACEMENT
Bulb connector plug
Bulb
Clips
1x Side
10x Side of Mirror
Use Philips
screwdriver to
remove three
screws from mirror
Plastic
Tie

6
GENERAL PRECAUTIONS
• Use only with 120V AC 60Hz power supply.
• Avoid placing the product in areas that are dusty, lack
ventilation, or are subject to constant vibration.
• Not for use with light dimmers, timers, motion
detectors, voltage transformers, or extension cords.
• Do NOT use lubricating agent in bulb assembly.
• Close supervision is recommended when this product
is used by or near children, or others who may not
understand the need for these precautions.
BASE OUTLET PRECAUTIONS
• For your convenience, there is an electric outlet at the
base of your mirror. Do not plug any appliance that
draws over 6 Amps into this outlet.
• Only use appliances with polarized plugs in the
base outlet.
WARNING:
KEEP AWAY FROM WATER

7
TROUBLESHOOTING
If the mirror does not light, or before requesting service on
your Verilux®product please read the following:
• Make sure all power connectors, cords and plugs are
inserted fully and securely.
• Make sure there is power to the wall outlet or try
another outlet — not connected to a dimmer.
• If you are using a CFGI receptacle, check the reset
switch on the face of the socket.
CARE & CLEANING
Your Verilux®mirror is made from high quality materials
that will last for many years with a minimum of care.
Clean only with a soft dry cloth – DO NOT USE
SOLVENTS OR CLEANERS CONTAINING ABRASIVES
OR AMMONIA
WARNING: To prevent risk of shock or personal
injury when cleaning mirror, make sure you have
turned off and unplugged the mirror and allow
sufficient time for the bulb to cool.
PRODUCT SPECIFICATIONS
• Bulb Type: Verilux 16W T4 Circular Fluorescent Bulb (FC16T4VLX)
• Mirror Electrical Parameters: 120VAC, 60Hz, 1A
• Base Outlet Electrical Parameters: 120VAC, 60Hz, 6A MAX
Environmental
• Operating Temperature: 15°C to 35°C; 59°F to 95°F
• Relative Humidity: 75% max