Verity Audio MUSE 8PC User manual

Verity Audio reserves the right to make any changes to the product specifications without prior notice.
Final specifications to be found in the user manual.
MUSE 8PC Active loudspeaker
User’s manual
www.verityaudio.fr

Verity Audio reserves the right to make any changes to the product specifications without prior notice.
Final specifications to be found in the user manual.
MUSE 8PC Active loudspeaker
User’s manual
www.verityaudio.fr

SPECIFICATIONS
Thank you for purchasing MUSE 8PC active speaker .
Designed with European customize speaker,MUSE 8PC
active loudspeaker has a very flat frequency response in it
working frequency range, high frequency and low
frequency have a smooth connection by the optimum X-
over point, it's very good for near field amplification.MUSE
8PC can output a very deep and warm low frequency
when install close to the wall, because of special designed
of the vent in cabinet.
*Peak level at 1 m under half space
All specifications are subject to change without notice.
Technical Information
System Type: Active Full Range Speaker
The way: Built-in X-OVER
Input Sensitivity(v):1V
Max SPL(dB): 116dB
*Short term max SPL(dB):122dB
Frequency Range(-10dB):50~20kHz
Frequency Response(-6dB):55~18kHz
Diffusion Angle:H90°xV90°
Speaker Drivers:
LF :1x8"Ferrite driver (1.8"voice coil)
HF:1x1"Ferrite compression driver (1"voice coil)
Amplifieroutput power:1x400W@8Ω CLASS D
Electric power:100~240V/AC 50~60 Hz
Cooling:Passive - Aluminum radiator
Connector
A signal connector:
2xNEUTRIK®XLR(Female input,Male link )
Audio signal connector:
2xNEUTRIK® PowerCon®(blue) input,(gray) link
Construction:
CNC processing 15mm birch multilayer plywood
Surface treatment:
Environmentally friendly water-based paint
Product Dimensions（WXDXH）:
280x330x460mm
Package dimensions（WXDXH）:
407x357x533mm
Weight:14.2kg/16.9kg
CONSTRUCTION DRAWNG:
REAR TOP BOT
FRONT SIDE

SPECIFICATIONS
Thank you for purchasing MUSE 8PC active speaker .
Designed with European customize speaker,MUSE 8PC
active loudspeaker has a very flat frequency response in it
working frequency range, high frequency and low
frequency have a smooth connection by the optimum X-
over point, it's very good for near field amplification.MUSE
8PC can output a very deep and warm low frequency
when install close to the wall, because of special designed
of the vent in cabinet.
*Peak level at 1 m under half space
All specifications are subject to change without notice.
Technical Information
System Type: Active Full Range Speaker
The way: Built-in X-OVER
Input Sensitivity(v):1V
Max SPL(dB): 116dB
*Short term max SPL(dB):122dB
Frequency Range(-10dB):50~20kHz
Frequency Response(-6dB):55~18kHz
Diffusion Angle:H90°xV90°
Speaker Drivers:
LF :1x8"Ferrite driver (1.8"voice coil)
HF:1x1"Ferrite compression driver (1"voice coil)
Amplifieroutput power:1x400W@8Ω CLASS D
Electric power:100~240V/AC 50~60 Hz
Cooling:Passive - Aluminum radiator
Connector
A signal connector:
2xNEUTRIK®XLR(Female input,Male link )
Audio signal connector:
2xNEUTRIK® PowerCon®(blue) input,(gray) link
Construction:
CNC processing 15mm birch multilayer plywood
Surface treatment:
Environmentally friendly water-based paint
Product Dimensions（WXDXH）:
280x330x460mm
Package dimensions（WXDXH）:
407x357x533mm
Weight:14.2kg/16.9kg
CONSTRUCTION DRAWNG:
REAR TOP BOT
FRONT SIDE

INSTALLATION
CONNECTION PANEL
Front Panel:
Volume
Power amplifier
Status indication
Signal input thru/
(20 kΩ balanced
10 kΩ unbalanced)
The power input/output
Protective accessories:
The dummy PLUG for Neutrik XLR and powerCON
simplifies wiring, eliminates the need for signal inputs to
avoid wiring errors, and also protects against dust.
Install loudspeaker with bracket:
Choose the right flying points and install with bracket*.
There is no bracket in the package, please
purchase by yourself.
Hanging:
MUSE series loudspeaker has M8 flying points,
you need to remove the screws of the flying points
when need to hang the loudspeaker.
And must check if all the screws are screw in to
the flying points after installation, if not it may
cause air leakage and make sound worse.
Angle adjustment:
MUSE P series loudspeaker have a rotatable horn,
so you can adjust it by yourself when you need to
change the angle.
Default angle:
Horizon 90°
Vertical 90°
Logo Angle adjustment:
MUSE series loudspeaker have a
rotatable Logo. Pull out the logo
3 to 6 mm gently and then rotate it
Line signal and power wiring diagram:
Max P ower di ssipa tion: 430W
power input
o pututoutputoutputoutput
Line input
Rea ding in struc tions
car efull y befor e using .

INSTALLATION
CONNECTION PANEL
Front Panel:
Volume
Power amplifier
Status indication
Signal input thru/
(20 kΩ balanced
10 kΩ unbalanced)
The power input/output
Protective accessories:
The dummy PLUG for Neutrik XLR and powerCON
simplifies wiring, eliminates the need for signal inputs to
avoid wiring errors, and also protects against dust.
Install loudspeaker with bracket:
Choose the right flying points and install with bracket*.
There is no bracket in the package, please
purchase by yourself.
Hanging:
MUSE series loudspeaker has M8 flying points,
you need to remove the screws of the flying points
when need to hang the loudspeaker.
And must check if all the screws are screw in to
the flying points after installation, if not it may
cause air leakage and make sound worse.
Angle adjustment:
MUSE P series loudspeaker have a rotatable horn,
so you can adjust it by yourself when you need to
change the angle.
Default angle:
Horizon 90°
Vertical 90°
Logo Angle adjustment:
MUSE series loudspeaker have a
rotatable Logo. Pull out the logo
3 to 6 mm gently and then rotate it
Line signal and power wiring diagram:
Max P ower di ssipa tion: 430W
power input
o pututoutputoutputoutput
Line input
Rea ding in struc tions
car efull y befor e using .

INSTALLATION
Important safety instructions
1. Please read and keep the instructions.
2. Follow the instructions in the user guide and watch the warning carefully.
3. Only use a dry cloth to clean the device.
. 4 Do not block any vents on the speaker, install the device according
to the manufacturer's instructions.
5. Place the speaker in a stable position to prevent damage or personal
injury from falling.
6. Please do not use the speaker near water, do not immerse the speaker in any liquid
7. Do not damage the and grounding plug of the power supply. If the polarized plug
plug is not suitable for your socket, please consult the electrician and replace the
plug.
8. Please protect the power cord from any trampling and pulling, especially the plug
and the socket near the device.
9. Please use reliabl base, and hanging parts (Best from the factory); when e board,
using the board to move the equipment, please avoid turning over to injured.
10.Disconnect the device from power when thunderstorms or when you are not using
the device for a long time.
11.For repairs, please choose a professional service person. The equipment must be
repaired if it is damaged. If the power plug and socket are damaged, the equipment
has been exposed to heavy rain or high humidity, and the equipment is not working
properly, etc
12. Warning – To avoid the risk of fire and electric shock, do not expose the device to“
moisture or rain.”
13.Do not expose the device to water or splashing water, ensuring that no liquid loads
(such as vases) are placed on the device.
14.This product can be used at altitudes up to 2000m
Please take care to prevent electric shock
Caveat
To reduce the risk of fire or electric shock
Do not expose the device to rain or moisture
The lightning flash with arrowhead symbol within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage “ within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.

INSTALLATION
Important safety instructions
1. Please read and keep the instructions.
2. Follow the instructions in the user guide and watch the warning carefully.
3. Only use a dry cloth to clean the device.
. 4 Do not block any vents on the speaker, install the device according
to the manufacturer's instructions.
5. Place the speaker in a stable position to prevent damage or personal
injury from falling.
6. Please do not use the speaker near water, do not immerse the speaker in any liquid
7. Do not damage the and grounding plug of the power supply. If the polarized plug
plug is not suitable for your socket, please consult the electrician and replace the
plug.
8. Please protect the power cord from any trampling and pulling, especially the plug
and the socket near the device.
9. Please use reliabl base, and hanging parts (Best from the factory); when e board,
using the board to move the equipment, please avoid turning over to injured.
10.Disconnect the device from power when thunderstorms or when you are not using
the device for a long time.
11.For repairs, please choose a professional service person. The equipment must be
repaired if it is damaged. If the power plug and socket are damaged, the equipment
has been exposed to heavy rain or high humidity, and the equipment is not working
properly, etc
12. Warning – To avoid the risk of fire and electric shock, do not expose the device to“
moisture or rain.”
13.Do not expose the device to water or splashing water, ensuring that no liquid loads
(such as vases) are placed on the device.
14.This product can be used at altitudes up to 2000m
Please take care to prevent electric shock
Caveat
To reduce the risk of fire or electric shock
Do not expose the device to rain or moisture
The lightning flash with arrowhead symbol within an equilateral triangle,
is intended to alert the user to the presence of uninsulated “dangerous
voltage “ within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.