Verity Audio VOICE12v User manual

User's manual
www.verityaudio.fr

SPECIFICATIONS
VOICE12v is a 2-way full range speaker.
VOICE12v designed with 3" voice coil and 400W
AES power bass driver, The HF driver is 1.73".
On the cabinet it has 20 M8 flying points and a
rotatable horn, can meet multipurpose
applications.
VOICE12v has a very flat frequency response in
all frequency bands, high frequency and low
frequency have a smooth connection by the right
X-over point, it's very good for near field
amplification.
VOICE12v can output a very deep and warm low
frequency when install close to the wall, cause
by its vent which is in the front of the cabinet.
Acoustics
Continuous power (50Hz~20kHz ): 450W (AES)
Program power (100Hz~20kHz ): 900W
Nominal impedance：8 Ω
Frequency response：50Hz~18kHz (-10dB)
Sensitivity：98dB/1W/1m
Maximum SPL (pink noise, 1W, 1m): ＞127dB
Horizontal diffusion: 80°
Vertical diffusion: 50°
Speaker components
LF section: 1x 12” driver (3” voice coil)
HF section: 1x 1.73” compression driver
(1.73” voice coil / 1” throat)
Connectors
2x NEUTRIK® Speakon NL4
(±1 INPUT / ±2 ILINK)
Cabinet
CNC made 15mm birch multi-layer plywood
sand texture and weather-resisting
protection paint
Hanging
20xM8 flying points
Size/Package Size：
W356xH590xD400mm / W500xH700xD465mm
N.W/G.W
17.5kg/21.1kg
590
356
400
Testing condition: 1m, no EQ, free space
Frequency response and impedance curve:

INSTALLATION
Wiring：
±2, Sub/LINK
±1，Full range/INPUT
When sub-woofer is in the same place with VOICE12v,
we suggest to use 4 wires, can save time and cable.
Like the picture on the right.
NL4 Speakon plug
Switch function
according to the different environments . FLAT is the default positions.
Frequency respons contrast
①: "BOOST" setting; ②: "FLAT" setting;
：
switch has "FLAT" and "BOOST" positions,it can switch to different positions
" "
:
①
②
AMP
+
_

INSTALLATION
Hanging:
VOICE12v has 20 M8 flying points,
when you need to hang the speaker just
need to remove the screws of the flying points.
And must check if all the screws are moved back to
the flying points after installation, if not it may
cause air leakage and make sound worse.
Angle adjustment:
①VOICE12v has a rotatable horn,
when you need to change the angle,
you canadjust it by yourself.
Default angle:
Horizon 80°
Vertical 50°
LOGO Angle adjustment
LOGO can rotate, adjustments can
be set aside 3-6 mm then gently turn
the LOGO.
② ：
!
M8X30

Install speaker with flying ring:
Choose the right flying points and
install with flying rings.
When installation try your best to
close to the wall 20cm to 30cm ,
that can improve the bass performance.
*
There is no flying ring(M8x30mm) in the
package, please purchase by yourself.
To achieve the best low frequency purpose,
should assemble the box close to the corner.
The back hole of the box should be kept
20-30cm from the wall.
M8X30 eye bolt
Eye bolt
M8X30
20~30cm
!
INSTALLATION

Install speaker with bracket:
install with bracket*.
*
There is no bracket in the package,
please purchase by yourself.
To achieve the best low frequency purpose,
should assemble the box close to the corner.
The back hole of the box should be kept
20-30cm from the wall.
Choose the right flying points and
20~30cm
Fuse&
Adjust the angle
Fuse&
Adjust the angle
!
INSTALLATION
Fuse&
Adjust the angle

Verity Audio reserves the right to make any changes to the product specifications without prior notice.
Final specifications to be found in the user manual.