
Introduction
What’s in the box
What you’ll need
●Compatible Verkada Camera or Sensor
●A #2 Phillips screwdriver or
power drill with a #2 Phillips driver bit
●1/2 inch (12.7mm) drill bit, or larger, for
routing cable through wall
●1/8 inch (3mm) drill bit for pilot holes
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
ACC-MNT-11 Junction Box
Compatible Products
●CB51, CB61
●CB52, CB62
●SV21, SV23, SV25
●Products with a 4” square junction
box mounting pattern
4 4x30, Phillips truss head,
self-tapping wood screws
Length: 30mm, Width: 9.4mm
4 M4x8, Phillips pan
head machine screw
Length: 8mm, Width: 7mm
Hole Patterns
A
B
C
D
4" square junction box (to mount surface)
4" square junction box (to device)
4" square junction box, alternative (to mount surface)
Double-gang junction box (to CB51, CB61 Junction Box Adapter)
3