Vermeiren Eclips X4 kids User manual

VERMEIREN
Eclips X4 KIDS
I N S T R U C T I O N M A N U A L

Instructions to the specialist dealer
This instruction manual is part and parcel of the product and must accompany every product sold.
Version: B, 2016-01
All rights reserved, including translation.
No part of this manual may be reproduced in any form what so ever (print, photocopy, microfilm or any other process) without
written permission of the publisher, or processed, duplicated or distributed by using electronic systems.
© N.V. Vermeiren N.V. 2016

Eclips X4 kids
2016-01
Page1
Contents
Preface ......................................................................................................................................2
1Product description.....................................................................................................3
1.1Intended Use................................................................................................................3
1.2Technical specifications ..............................................................................................4
1.3Drawing.......................................................................................................................5 
1.4Accessories..................................................................................................................5
1.5Location identification plate........................................................................................5
1.7Explanation of symbols...............................................................................................6
1.8Safety rules..................................................................................................................6 
2Use................................................................................................................................7
2.1Carrying the wheelchair..............................................................................................7
2.2Mounting the rear wheels (if quick release axle is available).....................................7
2.3Unfolding the wheelchair............................................................................................7
2.4Mounting or removing of the foot rests ......................................................................7
2.5Operating the brakes....................................................................................................8
2.6Transfer in and out the wheelchair..............................................................................8
2.7Correct position in the wheelchair ..............................................................................8
2.8Riding the wheelchair..................................................................................................9
2.9Moving on slopes........................................................................................................9
2.10Negotiating steps or curbs...........................................................................................9
2.11Fold up the wheelchair..............................................................................................11
2.12Taking off the wheels................................................................................................11
2.13Push bar.....................................................................................................................11
2.14Transport in the car....................................................................................................12
2.15Use of the wheelchair as seat in a motor vehicle (Eclips X4 kids)..........................12
3Installation and adjustment.....................................................................................14
3.1Tools..........................................................................................................................14
3.2Manner of delivery....................................................................................................14
3.3Adjusting the seat height and seat angle ...................................................................15
3.4Flexible seat...............................................................................................................17
3.5Anatomical seat.........................................................................................................17
3.6Adjusting seat depth..................................................................................................18
3.7Flexible backrest .......................................................................................................18
3.8Anatomical backrest..................................................................................................19
3.9Adjust the brakes.......................................................................................................19
3.10Adjusting of the foot rests.........................................................................................19
3.11Adjusting of the armpads ..........................................................................................20
3.12Adjusting of the tip cap.............................................................................................21
3.13Adjusting the stability and the maneuverability........................................................21
4Maintenance..............................................................................................................22

Eclips X4 kids
2016-01
Page2
Preface
First of all we want to thank you for putting your trust in us by selecting one of our
wheelchairs.
The Vermeiren wheelchairs are the result of many years of research and experience. During
the development, special attention was given to the ease of use and the serviceability of the
wheelchair.
The expected lifetime of your wheelchair is strongly influenced by the care and maintenance
of the wheelchair.
This manual will help you get acquainted with the operation of your wheelchair.
Following the user instructions and the maintenance instructions are an essential part of the
warranty.
This manual reflects the latest product developments. Vermeiren has the right to introduce
changes without the obligation to adapt or replace previously delivered models.
For any further questions, please consult your specialist dealer.

Eclips X4 kids
2016-01
Page3
1 Product description
1.1 Intended Use
The wheelchair is intended for people with walking difficulties or no walking abilities.
The wheelchair is designed to transport 1 person.
The wheelchair is suited for indoor and outdoor use.
The user can propel the wheelchair by himself or have the wheelchair pushed by an
attendant.
The different types of fittings and accessories, and the modular construction allow full use by
persons disabled by:
paralysis
loss of limbs (leg amputation)
limb defects or deformations
stiff or damaged joints
heart insuffiencies and poor blood circulation
balance disturbances
cachexia (decrease in muscle)
and also for aged persons.
When providing for individual requirements:
body size and weight (max. 80 kg)
physical and psychological condition
residential circumstances
environment
should be taken into consideration.
Your wheelchair should only be used on surfaces where all four wheels are touching the
ground and where there is sufficient contact to propel the wheels equally.
You should practice for use on uneven surfaces (cobblestones, etc.), slopes, curves and to
get past obstacles (curbs, etc.).
The wheelchair should not be used as a ladder, nor is it a transport for heavy or hot objects.
When used on mats, carpeted floors or loose floor coverings, the floor covering can get
damaged.
Use only Vermeiren approved accessories.
The manufacturer is not liable for damage caused by the lack of or improper service or as a
result of not following instructions from this manual.
Compliance with the user and maintenance instructions are an essential part of the
guarantee conditions.

Eclips X4 kids
2016-01
Page4
1.2 Technical specifications
Technical terms below are valid for the wheelchair in standard settings.
If other foot rests / arm rests or other accessories are used, the tabulated values will change.
Make
V
ermeiren
Address
V
ermeirenplein 1/15, B-2920 Kalmthout
Type Manual wheelchai
r
Model Eclips X4 kids
Maximum occupant mass 80 kg
Description Dimensions
Effective seat width 320 mm 370 mm
Overall width (depends on the seat width) 500 mm 550 mm
Effective seat depth 310 mm – 370 mm 330 mm - 390 mm
Description Dimensions Min. Dimensions Max.
Overall length with foot rest 830 mm 1000 mm
Folded length without foot rest 630 mm 800 mm
Folded width 310 mm
Folded height 820 mm 980 mm
Total mass ± 15,00 kg
Mass of heaviest part 9,40 kg
Masses of parts that can be dismantled or
removed
Foot rests: 1,80 kg; Rear wheels: 3,80 kg
Static stability downhill 10° (in standard configuration)
Static stability uphill 10° (in standard configuration)
Static stability sideways >16° (in standard configuration)
Obstacle climbing 60 mm
Seat plane angle 5°
Seat surface height at front edge 420 mm 470 mm
Backrest angle 5°
Backrest height 350 mm 400 mm
Distance between foot rest and seat 310 mm
Angle between seat and foot rest 11°
Distance between armpad and seat 150 mm 180 mm
Front location of arm rest structure 150 mm
Handrim diameter 480 mm
Horizontal location of axle (deflection) 70 mm 120 mm
Minimum turning radius 1530 mm
Diameter PU Rear wheels 22"
Tyre pressure, rear (driving) wheels (only
for air tyres)
Max. 3.8 bar
Diameter PU steering wheels 150 mm
Tyre pressure, steering wheels (only for air
tyres)
Max. 2.5 bar
Storage and use temperature + 5 °C + 41 °C
Storage and use humidity 30% 70%
We reserve the right to introduce technical changes. Measurement tolerance ± 15 mm / 1,5 kg
/
°
Table 1: Technical specifications Eclips X4 kids

Eclips X4 kids
2016-01
Page5
The wheelchair complies to the requirements set up in:
ISO 7176-8: Requirements and test methods for static, impact and fatigue strengths.
ISO 7176-16: Resistance to ignition of upholstered parts
ISO 7176-19: Wheeled mobility devices for use as seats in motor vehicles.
1.3 Drawing
1.4 Accessories
The following accessories are available for the Eclips X4 kids:
Anterior pelvic belt (B58) for mounting on the tubes of the back
Anti-tipping device (B78) for mounting on the bottom frame
Arm rests (B05, B82)
Foot rests (B06, BA6, BZ8, BZ7, BK6)
Table (B12)
Transit wheelchair (T30)
Contact your specialist dealer about other accessories. He will gladly advise you.
1.5 Location identification plate
1 = Cross
2 = Handgrips
3 = Backrest
4 = Armpads
5 = Arm rests (cloth protectors)
6 = Driving wheels (rear wheels)
7 = Hand rims
8 = Brakes
9 = Tip cap
10 = Steering wheels (Front wheels)
11 = Foot rests
12 = Seat
1= Vermeiren name
2 = Crash tested
3 = Identification plate

Eclips X4 kids
2016-01
Page6
1.7 Explanation of symbols
Maximum mass
Indoor and outdoor use
Maximum Safe Slope
CE conformity
1.8 Safety rules
L To prevent injury and/or damage to your wheelchair, make sure that no objects
and/or body parts are caught in the spokes of the driving wheels.
L The parking brakes should be applied before getting into and out of the wheelchair.
L When getting into and out of the wheelchair, do not stand on the footplates. These
should be folded up beforehand, or the foot rests should be swung completely
outwards out of the way.
L Investigate the effects of shifting the centre of gravity on the behavior of the wheelchair,
for example on up or down gradients, on laterally sloping ground, or when overcoming
obstacles. Obtain support from an attendant.
L If you want to pick up something (lying in front of, on the side, or to the rear of the
wheelchair), you should not lean too far out to avoid tipping over.
L When moving through doors, arches, etc. ensure that there is enough room at the sides
so that you do not get your hands or arms caught or crushed and that there is no
damage to the wheelchair.
L Only use your wheelchair according to regulations. For example, avoid uncontrolled
rolling against obstacles (steps, curbs, doorframes, etc) or dropping down from ledges.
The manufacturer cannot assume liability for damage caused by overloading, collision
or other improper use.
L Stairs may only be negotiated when aided by another person. If furnishings like drive-on,
ramps or lifts are available, use them.
L When moving on the public highway, you are subject to the rules of the road.
L When driving your wheelchair, you should not be under the influence of alcohol or
medicine as in the case of driving other vehicles. This also applies to indoor driving.
L When travelling outdoors, adapt your driving to weather and traffic conditions.
L When transporting the wheelchair, never pick it up by grasping movable parts (arm
rests, foot rests, etc.).
L To be better visible when driving in the dark, wear the brightest possible clothing or
clothes with reflectors, and check that the reflectors mounted on the sides and rear of
the wheelchair are clearly visible.
L Never exceed the maximum load of 80 kg.
Type designation
Not intended to be used as a seat in a Motor vehicle

Eclips X4 kids
2016-01
Page7
2 Use
This chapter describes the everyday use. These instructions are for the user and the
specialist dealer.
The wheelchair is delivered fully assembled by your specialist dealer. The instructions
intended for the specialist dealer on how to set up the wheelchair are given in § 3.
2.1 Carrying the wheelchair
The best way to carry the wheelchair is to make use of the wheels and roll the wheelchair.
If this is not possible (e.g. when the rear wheels are taken off for transportation in a car),
firmly grasp the frame on the front and the handgrips. Do not use the foot rests, arm rests or
the wheels to grasp the wheelchair.
2.2 Mounting the rear wheels (if quick release axle is available)
1. Take the rear wheel and push on button .
2. Keep the button pushed in and mount the rear
wheels axle till it stops.
3. Release the button .
4. Check that the wheel is secured.
2.3 Unfolding the wheelchair
LCAUTION: Risk of clamping – Keep fingers away from moving parts of the
wheelchair.
1. Position yourself behind the wheelchair.
2. Use the handgrips to open the wheelchair as much as possible.
3. Position yourself at the front of the wheelchair.
4. Push both seating tubes down till they are fixed in their position.
5. When the push bar is available mount the push bar to the right handgrip.
2.4 Mounting or removing of the foot rests
The mounting of the foot rests is done as follows:
1. Hold the foot rest sideways at the outside of the
wheelchair frame and mount the tube hood 
into the frame.
2. Swing the foot rest inwards till it clicks in
position.
3. Swing the footplate downwards.
To take off the foot rests:
1. Pull lever
.
2. Swing the foot rest to the outside of the
wheelchair till it comes loose from the guidance.
3. Pull the foot rest tube hood out the
wheelchair frame.

Eclips X4 kids
2016-01
Page8
2.5 Operating the brakes
LWARNING: The brakes are not used to slow down the wheelchair during
movements – Use the brakes only to prevent the wheelchair from unintended
movements.
LWARNING: Good operation of the brakes is influenced by wear and
contamination of the tires (water, oil, mud, …) – Check the condition of the tires
before each use.
LWARNING: The brakes are adjustable and can wear – Check the operation of the
brakes before each use.
To apply the brakes:
1. Push the brake levers forward till you feel a
distinctive click.
LCAUTION: Risk of unintended movement –
Make sure the wheelchair is on a flat
horizontal surface before releasing the
brakes. Never release both brakes
simultaneously.
To release the brakes:
1. Release one brake by pulling the lever 
backwards.
2. Hold the hand-rim of the released wheel with
your hand.
3. Release the second brake by pulling the lever
backwards.
2.6 Transfer in and out the wheelchair
LCAUTION: In case you cannot perform the transfer in a safe manner, ask
someone to assist you.
LCAUTION: Risk of tipping over of the wheelchair – Do not stand on the
footplates.
1. Position the wheelchair as close as possible to
the chair, couch or bed to/from you wish to
transfer.
2. Check both brakes from the wheelchair are in
the on position.
3. Fold the footplates upwards to prevent standing
on them.
4. Transfer to/from the wheelchair or let your
parent or attendant lift you out the wheelchair.
2.7 Correct position in the wheelchair
Some recommendations for a comfortable use of the wheelchair:
Position your backside as close as possible to the backrest.
Make sure your upper legs are horizontal – If needed adjust the length of the foot
rests. (see § 3.10.1)

Eclips X4 kids
2016-01
Page9
2.8 Riding the wheelchair
LWARNING: Risk of clamping – Prevent your fingers from being caught by the
wheels spokes.
LWARNING: Risk of clamping – Be careful passing through restricted passages
(e.g. doors).
LWARNING: Risk of burns – Be careful when driving in hot or cold environments
(sunshine, extreme cold, saunas, etc.) for a long amount of time. Touching
surfaces which can assume the environment temperatures, can cause burns.
1. Release the brakes.
2. Take both hand rims at their highest position.
3. Lean forward and push the hand rims forward until straight arms.
4. Swing your arms loosely back to the hand rims topside and repeat the movement.
2.9 Moving on slopes
LWARNING: Control your speed – Moving on slopes as slow as possible.
LWARNING: Consider the capacities of your attendant – If your attendant does not
have enough force to control the wheelchair, put on the brakes.
LWARNING: Risk of tipping over – Lean forward to move your centre of gravity
forward. To improve a better stability.
1. If available on the wheelchair, wear the safety belt.
2. Do not attempt moving on too high slopes. The maximum
slope angles (upwards and downwards) are mentioned in
table 1 for Eclips X4 kids.
3. Ask an attendant to help you moving on the slope.
4. Lean forward to move your centre of gravity forward.
2.10 Negotiating steps or curbs
2.10.1 Getting down steps or curbs
Riding down low curbs can be done moving forwards. Make sure that the footplates do not
touch the ground.
A practiced user can negotiate small steps or curbs by himself:
L WARNING: Risk of tipping over – If you do not have
enough experience with your wheelchair, ask
assistance of an attendant.
1. Bring balance on the rear wheels to reduce the pressure on
the front wheels.
2. Negotiate the curbs.
Higher curbs can be taken forward with an attendant:
1. Ask the attendant to tip the wheelchair slightly backwards.
2. Get past the curbs while moving on the rear wheels.
3. Put the wheelchair back on the four wheels.

Eclips X4 kids
2016-01
Page10
An experienced user can negotiate higher curbs by himself. This is
best done backwards.
1. Turn the wheelchair to have the rear wheels facing the
curb.
2. Lean forward to move your centre of gravity forward.
3. Move the wheelchair close to the curbs.
4. Use the hand rim to roll-off wheelchair from the curb in a
controlled manner.
2.10.2 Moving up steps or curbs
Moving up steps or curbs with attendant as follows:
1. Prevent the footplates from touching the curb.
2. Ask the attendant to tip the wheelchair backwards, just
enough to move the front wheels over the curb.
3. Lean backwards to move your centre of gravity above the rear
wheel.
4. Place the front wheels on the curb.
5. Roll rear wheels of the wheelchair over the curb.
Higher curbs are negotiated backwards:
1. Turn the wheelchair to have the rear wheels facing the curb.
2. Lean backwards and move your centre of gravity above the rear wheels.
3. Ask the attendant to pull the wheelchair on the curb.
4. Take back the normal position in the wheelchair.
An experienced user can negotiate curbs by himself:
LWARNING: Risk of tipping over – If you have not enough experience to control
the wheelchair, get help from an attendant.
1. Drive until the curbs.
2. Ensure that the foot rest do not touch the curbs.
3. Lean backwards so you are balancing on the rear wheels.
4. Role the front wheels balancing over the curbs.
5. Bend forward for more stability.
6. Role the rear wheels over the curbs.
2.10.3 Taking of stairs
Taking of stairs while you staying in the wheelchair shall be according following rules:
LWARNING: Risk of tipping over – Taking of stairs shall always with 2 attendants.
1. Remove the foot rests.
2. One attendant tip the wheelchair slightly backwards.
3. The second attendant take the front of the frame.
4. Stay calm, avoid sudden movements and keep your arms inside the wheelchair.
5. Take the steps on the rear wheels of the wheelchair.
6. Mounting the foot rests back after taking the stair.

Eclips X4 kids
2016-01
Page11
2.11 Fold up the wheelchair
L CAUTION: Chance of pinching – Do not place fingers between the components
of the wheelchair.
1. When the push bar is available remove the push bar.
2. Fold or remove the footplates (see § 2.4).
3. Take the seat on the front side and backside and pull it up.
4. Push on the handgrips to fold up the wheelchair further.
2.12 Taking off the wheels
To facilitate the transport off the wheelchair the rear wheels can be taken off:
1. Make sure the brakes standing in the off
position.
2. Take the wheelchair to the side frame where
you want to remove the wheel.
3. Press the button in the center of the wheel
hub.
4. Pull the wheel away from the frame.
2.13 Push bar
LWARNING: Risk of injury - Make sure that all screws are properly tightened with
the appropriate tool.
LWARNING: Risk of injury - When equipped with the push bar, the push bar shall
always be mounted (→to increase the stability of the backrest).
Your wheelchair can have a push bar. The push bar increase the stability of the backrest and
offer you the possibility of pushing the wheelchair by an attendant. To do this, use the pre-
mounted handgrips.
As there are different push bars for different seat widths, take care that no tension between
the handgrips of the back tubes is created.
The mounting of the push bar is done as follows:
1. Secure the push bar by fastening the left side
to the end of back tube handgrip with the
Philips screw in the applicable sunk threads.
2. Screw gently the Philips screw on the right
hand side into the thread of the back tube.
3. Swing the push bar to the right.
4. Hook the suspension of the push bar over the
screw thread.
Use the two holes on the left handgrip to adjust
the tension of the backrest.
To take off the push bar:
1. Loosen the Philips screw on the right handgrip.
2. Remove the hook from the right handgrip.

Eclips X4 kids
2016-01
Page12
2.14 Transport in the car
LWARNING: Risk of injury – See that the wheelchair is attached properly. So you
can avoid injury from the passengers during collision or sudden braking.
LWARNING: Risk of injury – Use for attaching the wheelchair and passenger
NEVER the same seatbelt.
To transport the wheelchair in the car use following steps:
1. Remove foot rests and accessories.
2. Store foot rests and accessories safely.
3. If possible, fold the wheelchair and remove the wheels.
4. Place the wheelchair in the luggage place.
5. If the wheelchair and the passenger compartment is NOT separated, attach the
frame of the wheelchair securely to the vehicle. You can use the available safety
belts in the vehicle.
2.15 Use of the wheelchair as seat in a motor vehicle (Eclips X4
kids)
LWARNING: The wheelchair has passed the crash test of ISO 7176-19: 2008
and, as such, has been designed and tested for use only as forward-facing seat
in a motor vehicle.
LWARNING: The wheelchair's pelvic belt alone is not suited as an occupant
restraint belt.
The wheelchair is tested using the four-point strap-tie system and a 3-point occupant-
restraint system.
Whenever feasable, use the seat of the vehicle and store the wheelchair in the cargo area.
Steps to secure the wheelchair in a motor vehicle:
1. Check that the vehicle is equipped with a suitable wheelchair tie down and occupant-
restraint system, conform ISO 10542.
2. Check that the components of the wheelchair tie down and occupant restraint system
are not frayed, contaminated, damaged or broken.
3. If equipped with an adjustable seat and/or back tilt, make sure that the wheelchair
user is sitting as upright as possible. If the user's condition prevents this, a risk
assessment should be done to evaluate the user's safety during transit.
4. Remove all mounted accessories such as trays and respiratory equipment, and
secure them in a safe place.
5. Position the wheelchair facing forward in the travelling direction, centrally between
the tie-down rails mounted in the floor of the vehicle.
6. Make sure that the indicated zones around the wheelchair user are clear from rigid
vehicle parts.

Eclips X4 kids
2016-01
Page13
7. Mount the front securement straps according to the instructions of the strap-system
manufacturer at the indicated place. (figure 3)
This place is marked on the wheelchair with a symbol. (figure 4)
8. Roll back the wheelchair until the front straps are tight.
9. Apply the wheelchair brake.
10. Mount the back securement straps according to the instructions of the strap-system
manufacturer at the indicated place. (figure 3)
11. This place is marked on the wheelchair with a symbol. (figure 4)
figure 3
Steps to secure the wheelchair user:
1. Remove both arm rests.
2. If present, attach the wheelchair's pelvic belt.
3. Attach the occupant restraint belts according to the instructions of the strap-system
manufacturer.
4. Wear the pelvic belt low across the front of the pelvis, so that the angle of the pelvic
belt is within the preferred zone of 30° to 75° to the horizontal, similar to that shown
below.
5. A steeper (greater) angle within the preferred zone is desirable.
6. Adjust the belt tightly according to the instructions of the strap-system manufacturer,
consistent with the user's comfort.
7. Ensure that the restraint belt connects in a straight line to the anchor point in the
vehicle and that no bends in the belt are visible, for instance at the axle of the rear
wheel.
8. Install the arm rests, if desired. make sure that belts are not twisted or held away
from the body by wheelchair components such as arm rests or wheels.

Eclips X4 kids
2016-01
Page14
3 Installation and adjustment
The instructions in this chapter are for the specialist dealer.
The Vermeiren Lightweight wheelchairs Eclips X4 kids has been designed entirely for your
comfort. This wheelchair can be adjusted to individual requirements as explained below.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
LWARNING: Risk of unsafe settings - Use only the settings described in this
manual.
LWARNING: Variation of allowed adjustments can still change the stability of your
wheelchair (tilt back or sideways).
3.1 Tools
To set up the wheelchair the following tools are needed.
Wrench set n° 10 to n° 19
Allen key set n° 4 to n° 5
Screwdriver Phillips head
3.2 Manner of delivery
The Vermeiren Eclips X4 kids shall be delivered with:
1 frame with arm rests (cloth protectors), rear and front wheels
1 pair foot rests
Tools
Manual
Accessories

Eclips X4 kids
2016-01
Page15
3.3 Adjusting the seat height and seat angle
LWARNING: Risk of injury - Make sure that all screws are properly tightened with
the appropriate tool.
LWARNING: Risk of tipping over - When the driving wheels are adjusted, the
position of the wheels are altered.
The Vermeiren Eclips X4 kids is adjustable in different seat heights and different seat angles
by changing the wheels position. At each height there is a different setting of the front and
rear wheels.
Change the seat height and seat angle according following steps:
* Front wheel:
1. Loosen the screws Ⓐfrom the steering wheel
adapter Ⓑ.
2. Choose correct size for the adapter Ⓑand fork.
3. Place the steering wheel adapter in the desired
position (2 different positions: steps from 34
mm).
4. Tighten the screws Ⓐproperly.
or
5. Loosen the screw Ⓓfrom the front fork Ⓔ.
6. Choose the correct position. Do not use the
holes and . (3 different positions: steps
from 12 mm).
7. Tighten the screws Ⓓproperly.
Adjustment of the slope nuts Ⓒfrom the steering wheels.
LWARNING: Risk of injury - Make sure that the eccentric screw settings are
identical on both front-wheel adapters and, before using the wheelchair.
This figure illustrates the principle. The position of the screw thread is indicated by a number.
AShows the frame when the seat is horizontal and the
adapter is perpendicular to the ground.
BShows the frame when the seat is tilted slightly and the
adapter is not perpendicular.

Eclips X4 kids
2016-01
Page16
* Rear wheel:
1.Remove the rear wheels (see § 2.12).
2. Loosen the fixing screws Ⓐfrom the
rear axle block Ⓑ.
3. Push the axle block Ⓑupwards or
downwards to the desired height (steps
from 15 mm).
4. Tighten the screws Ⓐproperly.
5. Mount the rear wheels.
6. Adjust the brakes according § 3.9.
It is also possible to rotate the rear axle
block Ⓑ(2 positions: steps from 15 mm).
Some of the wheelchairs Eclips X4 kids Aktief are made with an adjustable axle adjuster.
With these adjuster you can also change the seat height.
1. Remove the screws and .
2. Push/Pull the adjustable axle adjuster 
upwards or downwards to the required
height.
3. Retighten the screws and .
1 2
3

Eclips X4 kids
2016-01
Page17
3.4 Flexible seat
LWARNING: Risk of injury - Make sure that all screws are properly tightened with
the appropriate tool.
The seat frame is available in different seat depths.
To close the gap between the back frame and the seat, fold the flap of the backrest under
the seat (Velcro fastening).
Changing the seat cover as follows:
1. Remove the screw at the front end of the seat frame.
2. Pull the locking pin Ⓒout.
3. Now the seat Ⓐcan be removed by pulling it gently forwards out the sleeve of tube
Ⓑ.
Do the reverse when you want to replace the seat.
3.5 Anatomical seat
If you have opted for an anatomical padded seat, place it on
the tubular cross-hinge so that the seat's supports engage
equally with the cross-hinge. In the wooden base you will find
slots that are placed in the hinge's cross-pieces. To fold up the
wheelchair, remove the seat by pulling it upwards.

Eclips X4 kids
2016-01
Page18
3.6 Adjusting seat depth
L
WARNING: Risk of injury - Make sure that all screws are properly tightened
before using the wheelchair.
The seat depth can be adjusted from 310 mm to 370 mm in steps from 20 mm for seat width
320 mm and from 330 mm to 390 mm in steps from 20 mm for seat width 370 mm.
Adjust the seat depth according
following procedure:
1. Remove the arm rests (cloth
protectors), foot rests and
rear wheels.
2. Loosen the screws .
3. Loosen the screws .
4. Remove the crosses from the
seat located on the main
frame by folding the
wheelchair.
5. Remove the screws 
located in the blocks for the
cross on the main
frame .
6. Remove the adjustable axle adapter, if available on your wheelchair.
7. Adjust the seat depth to the desired position by moving the back frame and/or seat
frame steps from 20 mm.
8. Tighten all the screws properly by hand.
9. Fold the flap of the backrest under the seat (Velcro fastening), to close the gap between
the back frame and the seat.
10. Adjusting the seat is not necessary.
11. Replace the arm rests (cloth protectors), foot rests and rear wheels. Mount the arm rests
in the correct hole of attachment plate .
3.7 Flexible backrest
L
WARNING: Risk of injury - Make sure that all screws are properly tightened
before using the wheelchair.
The height of the backrest can be adjusted by setting the
entire back tube.
For adjusting the height of the back cover, loosen the
fixing screws behind the back tube. Then you can
move the cover upwards or downwards. There are fixing
holes every 20 mm in the back tube where the screws
can be retightened.
1