Vestax PMC-06ProD User manual

PROFESSIONAL MIXING CONTROLLER
FUNCTIONS
The replacement crossfader unit for PMC-06ProD
is "CF-X".
"CF-05PRO","CF-PCV" cannot be substituted in
this mixer.
OWNER'S MANUAL
Vestax Corporation
1-18-6 Wakabayashi, Setagaya-ku, Tokyo 154-0023 Japan
Phone [phone] Fax [phone]
Web : www.vestax.jp
Vestax (Europe) Ltd.
Unit 5 Riverwey Industrial Park Alton Hampshire GU34 2QL England, U.K.
Phone [phone] Fax [phone]
Web : www.vestax.co.uk
Vestax Technical Center of America
8489 W. Third Street Ste. 1044 Los Angleles, CA 90048
Phone [phone] Fax [phone]
TOP PANEL
CURVE PATTERN SWITCH(a) selects the cross-
fader curve pattern.
Setting the C.F.FINE CONTROL to minimum, the
crossfader curve is most sharp,moving the control
clockwise,towards max,gradually reduces the
sharpness of the curve (b).
Thank you for purchasing the VESTAX PMC-06ProD. Please read this owner's manual carefully before you start to
use in order to understand fully how it to operate your new mixer.
CONGRATULATIONS!
FEATURES
The new Vestax Digital Fader System consists of coils and a permanent magnet.There is no contact between
these parts.Therefore,neither the element or magnet gets degraded or damaged even after hard usage.
Unlike an optical type fader, the digital fader system does not get effected even by liquid spills or dusts.
Control of the fader curve by a complete digital signal system, enabling creation of sharp edges in the curve
pattern.
(a) CURVE PATTERN SWITCH
(b) C.F. FINE CONTROL
TRIM
MIN MAX MIN MAX
BAL
POWER
POWER
PHONO 1
LINE 1
-12 +12 -12 +12
-12
-20 -10 -6 -3 0 +3 +6 (dB) -20 -10 -6 -3 0 +3 +6
+12 -12 +12
LEFT RIGHT LEFT RIGHT
PGM 1 PGM 2
PGM 1 PGM 2
PHONO 2
LINE 2
21
LEVEL LEVEL
HI
LO
EQ
TRIM
BAL
HI
LO
EQ
CURVE
PATTERN
MAXMIN
C.F. FINE
DIGITAL FADER CONTROL
1
234
0
1
2
3
4
5
6
7
8
9
10
0
1
2
3
4
5
6
7
8
9
10

1
2
34
1
2
34
1
2
34
1
2
34
PRE-SET CURVE
SHAPE 1:
SHAPE 2:
SHAPE 3:
SHAPE 4:
C.F.POSITION
C.F.POSITION
C.F.POSITION
Using curve pattern switch,select the crossfader curve pattern from SHAPE1-4, to set the cross-
fader pattern.
As this curve shape is very sharp,it is
used for hard scratch play.
Setting C.F.FINE CONTROL to
minimum,the curve sharp is most
sharp.As the switch moves closer to
max,the curve sharpness reduces.
This curve shape is "A" type curve.
In this position,switching C.F.FINE
CONTROL from MIN to MAX, the
crossfader curve shape changes
from slow slope curve to sharp slope
by 8 steps.
This curve shape is rectangle wave type.Moving the crossfader from right to left or from
left to right,it performs like a "transformer scratch".Switching C.F. FINE CONTROL,the 8
patterns crossfader curve shape can be selected.It enables selection of the 8 patterns of
curve shape as fig 1- fig 8 below.
C.F. FINE CONTROL : MIN
C.F. FINE CONTROL : MIN
C.F. FINE CONTROL : MIN
C.F. FINE CONTROL : MAX
C.F. FINE CONTROL : MAX
C.F. FINE CONTROL : MAX
C.F.POSITION fig-3 fig-4fig-1
C.F. FINE CONTROL : MIN
fig-8
C.F. FINE CONTROL : MAX
fig-7fig-6fig-5
fig-2