Vestil CART-600-S-HR User manual

- 1 -
INSTRUCTION MANUAL
FOR PREMIUM SCISSOR LIFT CARTS
MODELS COVERED: CART-300-S-HR,
CART-600-S-HR, , CART-1000-S-HR, CART-400-D-HR

- 2 -
Content
1. Warning………………………………………………….3
2. Caution…………………………………………………..4
3. Name of parts…………………………………………...5
4. Daily inspection…………………………………………6
5. Operating lifttable……………………………………… 6~7
6. Specifications……………………………………………8
7. Service instruction………………………………………8~9
8. Hydraulic Circuit…………………………………………9
9. Exploded view & part
list……………………………….10~19

- 3 -
BEFORE OPERATING THE LIFT TABLE, READ THIS MANUAL
CAREFULLY AND UNDERSTAND COMPLETELY. KEEP THIS MANUAL
ON FILE FOR FUTURE REFERENCE. IF THIS IS LOST, PLEASE
CONTACT YOUR LOCAL SUPPLIER FOR A NEW COPY. ALSO, IF THE
WARNING/CAUTION DECAL ON THE UNIT IS LOST, PLEASE
CONTACT YOUR LOCAL SUPPLIER FOR A NEW DECAL.
NOTE: On this manual, WARNING means the danger which can lead to
death or serious injury. CAUTION means the danger which can lead to
slight injury or property damage.
1. WARNING
1.DO NOT put foot or hand in scissors mechanism.
2.DO NOT allow other person to stand in front of or behind lift table when it is
moving.
3.DO NOT move lift table when table is in raised position. Load could fall down.
4.DO NOT enter under table.
5.DO NOT overload lift table.
6.DO NOT put foot in front of rolling wheels. Injury could result.
7.WATCH difference and hardness of floor level when moving lift table. Load could
fall down.
8.DO NOT use lift table on slope or inclined surface, lift table may become uncontrollable
and create danger.
9.DO NOT lift people. People could fall down and suffer severe injury.

- 4 -
2. CAUTION
1.Read this operation manual carefully and understand completely operating lift
table. Improper operation could create danger.
2.This lift table is a movable lifter designed to lift or lower rated load on table. NO
NOT use lift table for other purpose than its intended use.
3.DO NOT allow person to operate lift table who does not understand its operation.
4.DO NOT lower table too fast. Load could fall down and create danger.
5.KEEP watching the condition of load. Stop operating lift table if load becomes
unstable.
6.Byake lift table when sliding load on or off table.
7.DO NOT side or end load. Load must be distributed on at least 80%of table area.
8.DO NOT use lift table with unstable, unbalanced loosely stacked load.
9.Practice maintenance work according to service instructions.
10. DO NOT modify lift table without manufacturers written consent.
11. REMOVE load from table and use safety stopper to prevent table from lowering
when servicing lift table.
12. This lift table is not designed to be water resistant. Use lift table under dry
condition.

- 5 -
3. NAME OF PARTS
CART-300/600/1000-S-HR

- 6 -
4. DAILY INSPECTION
Daily inspection is effective to find the malfunction or fault on lift table. Check lift table
on the following points before operation.
CAUTION
DO NOT use lift table if any malfunction or fault is found.
(1) Check for scratch, bending or cracking on the lift table.
(2) Check if there is any oil leakage from the cylinder.
(3) Check the vertical creep of the table.
(4) Check the smooth movement of the wheel.
(5) Check the function of brake.
(6) Check if all the bolt and nuts are tightened firmly.
5. OPERATING LIFTTABLE
5-1. How to use the brake.
CAUTION
Brake lift table when not moving it in order to prevent sudden movement.
The brake is equipped with the swivel caster on the right side.
(1) Braking the wheel, press the brake pedal.
(2) Releasing the brake, lift up the brake pedal.

- 7 -
5-2 Lifting the table
WARNING
1. DO NOT overload lift table, stay within its rated capacity.
2. DO NOT side end load must be distributed on at least 80% of table area.
Press the lifting pedal several times until the table reaches the desired position.
The table does not elevate after reaching the highest position even if the lifting pedal
is pressed.
The table lowers slightly after reaching the highest position.
NOTE:
The hydraulic cylinder is designed to hold table. As is the nature of the hydraulic
system, table lowers very slowly over and extended period of time, Please note the
table does not stay at the same position on indefinitely.
5-3. Lowering table
WARNING
DO NOT put foot or hand in scissors mechanism.
Pull the lowering down and table lowers.

6. Specifications
Model Capacity
(lbs) Table (WxL) Table Height L×W×H
FrontRigid
Wheel(HR)
RearSwivel
Wheel(PP) Weight (kg)
CART-300-S-HR 300 23⅝” x 35 7/16” 13⅛”—36¼” 45¼”×25⅝”×38 3/16” Ø8” x 2” Ø5” x 1½” 145
CART-600-S-HR 600 23⅝” x 35 7/16” 13⅛”—36¼”45¼”×25⅝”×38 3/16” Ø8” x 2” Ø5” x 1½” 145
CART-1000-S-HR 1,000 23⅝” x 35 7/16” 13⅛”—36¼”45¼”×25⅝”×38 3/16” Ø8” x 2” Ø5” x 1½” 145
CART-400-D-HR 400 23⅝” x 35 7/16” 18⅛”—64½” 45¼”×25⅝”×38 3/16” Ø8” x 2” Ø5” x 1½” 188

- 8 -
6. Service instruction
7-1. Lubricate each point described below every month:
7-2.Change hydraulic oil every 12 months.
Lubricating Points
(1) Fitting of slipper…… Oil
(2) Fitting of cylinder……Oil
(3) Guideway surface……Grease
(4) Pedal fitting point……Oil
(5) Roller fitting point……Oil
(6) Wheel fitting……Grease
(7) Grease nipple……Grease

- 9 -
7. Hydraulic Circuit