VEVOR SSX80 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
COMMERCIAL ICE MAKER SERIES
PRODUCT MANUAL
MODEL: SSX80 SSX90 SSX100 SSX110 SSX120
SSX130 SSX140 SSX300 SSX440
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
ODEL: SSX80 SSX90 SSX100 SSX110 SSX120
SSX130 SSX140 SSX300 SSX440
Have product questions? Need technical support? Please feel free to
contact us:
Technical Support and E-Warranty Certificate
www.vevor.com/support
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
COMMERCIAL ICE MAKER
SERIES PRODUCT MANUAL

- 2 -
Content
Part 1: The warning diagram and operation safety instructions........1-5
Part 2: Installation instructions.......................................................6-7
Part 3: Operating Instructions.........................................................8-10
Part 4: Precautions.........................................................................10-11
Part 5: Troubleshooting of this series of machines..........................12-13
Part 6: Circuit diagram........................................................................13
1. The warning diagram and operation safety
instructions
Prohibition mark
Warning mark
Beware of fire
Dangerous
voltage
Indicates a
prohibited act
that could cause
fatal injury or
serious injury
Indicates
matters that
may cause
personal injury
or damage to
items
Indicates that
the material
used is a
combustible
material,
beware of fire
Indicates a
high-voltage
electric danger
zone, beware of
high-voltage
electricity
Note: Be sure to keep this manual in a location that users can access
at any time.

- 3 -
Safe operation precautions.
Caution
After receiving the goods, you have to let the compressor's
lubricating oil settle for 24 hours to start the use, otherwise
it will easily damage the compressor.
Do not use the ice machine in the open air. When the ice
machine is wet by rain, it may cause electric leakage or
electric shock.
Never place this ice machine in a wet location or where it is
subject to splashing water. Damage to the insulation of the
ice machine may cause electric leakage or electric shock.
Never spray water directly onto the ice machine. A wet ice
machine may cause electric shock or short circuit.
Be sure not to put volatile or flammable substances into
the ice machine. Storage of such materials may cause an
explosion or fire.
The ice machine should only be installed by qualified
engineers or maintenance personnel. Installing the ice
machine by yourself may cause gas or liquid leakage,
electric shock or fire.
Never disassemble, repair, or modify the ice machine. If
such work is performed by unqualified personnel, it may
cause fire or personal injury due to work failure.
Never ground the ice machine through a gas pipe, water
mains, telephone line or lightning rod. This is considered
unsafe to ground.

- 4 -
Never insert metal materials such as iron pins or wires into
the vents, passage holes or exhaust ports for air circulation
in the tank. This may result in electric shock or personal
injury due to accidental operation of moving parts.
Be sure to place the ice machine firmly on a solid floor. If
the floor is not strong enough or not placed properly, it will
cause damage due to the ice machine being turned upside
down or overturned.
Be sure to use the dedicated power supply specified on
the nameplate of this ice machine. Using a branch socket
may cause a fire.
Be sure to insert the power plug firmly into the outlet after
removing the dust.
A dusty socket or improperly inserted may cause a fire.
Use a grounded outlet to prevent electric shock. In the
unlikely event that there is no grounded outlet, the
grounding device must be assembled by a qualified
engineering technician. The socket should be in an easily
accessible position after installation.
If there is any abnormal temperature or alarm in the box for
any reason, you must immediately transfer the contents of
the box to a safe place to avoid your loss.
This appliance contains flammable materials and must be
disposed of and recycled by qualified personnel and
agencies.
Do not use mechanical equipment or other means to
speed up the defrosting
process except as recommended by the manufacturer.

- 5 -
Do not damage the refrigeration circuit.
Except for the type recommended by the manufacturer, the
appliance must not be used in the food storage room of the
appliance.
Use the new hose assembly that comes with the appliance
and the old hose assembly cannot be reused.
When handling toxic, hazardous or radioactive materials,
use this ice machine in a safe place. Improper use may
adversely affect your health and the environment.
The disposal of the ice machine should be done by a
special person. Never throw the ice machine away and let
it be natural. This may cause the child to be shut down in
the ice machine.
There are no obstructions around the appliance or in the
embedded structure, keeping the ventilation open.
Unplug the power cord before cleaning, maintaining, or
inspecting the ice machine to prevent electric shock or
personal injury.
Some models use flammable refrigerants and flammable
foaming agents, beware of fire, (the product has a "beware
of fire " mark). When an abnormality occurs in the
product, it must be repaired by qualified personnel and
institutions.

- 6 -
This appliance contains a flammable blowing agent,
cyclopentane, which must be disposed of and recycled by
qualified personnel and institutions.
Children should be supervised to ensure that children do
not play with the machine.
When the ice machine malfunctions, unplug the power
cord. Continued abnormal operation may result in electric
shock or fire.
Electrical safety matters
1.The working voltage of the ice maker should be consistent with the
famous brand. If the voltage is not in this range, please purchase a voltage
regulator above 1000W.
2.Be sure to connect the ground wire and ground it safely. The ground wire
should not be connected to the water pipe or gas pipe.
3.In order to protect the compressor, do not start the ice machine again
within 10 minutes after power off or shutdown.
4.Please do not connect other electrical appliances to the same socket.
5.If the power cord is damaged, in order to avoid danger, it must be
replaced by a person arranged by the manufacturer or a qualified
professional.
6.The electrical control system has a voltage of more than 36V, do not
open and touch when used, if you need to repair, please contact the
manufacturer or have relevant qualified technical personnel to deal with.
WARNING: Do not operate the ice machine when a gas leak occurs in the
environment in which the ice machine is located. Because the spark
caused by the opening and closing of the plug or the temperature controller
may cause a fire, the air source should be cut off and the window should be
opened to allow air to circulate.

- 7 -
Installation Precautions
Requirements for handling and moving conditions:
When transporting, the cabinet should be kept as straight as possible, and
the inclination should not exceed 45°at most. Do not invert and lie
horizontally.
To operate the ice machine properly and get the best performance,
place the ice machine in the following conditions:
1.Solid and flat ground
Place the ice machine on a solid, level surface to avoid excessive vibration
and noise.
2.Keep away from the heat source
Avoid placing the ice machine near hot equipment such as gas stoves or
stoves. Heating the ice machine can cause a decrease in cooling
efficiency.
3.Avoid direct sunlight
If the ice machine is installed in direct sunlight, it may cause abnormal work
and may shorten the working life of the ice machine.
4.Dry area
Avoid placing the ice machine in a wet area, for example, near a faucet or
near a sink.
Be careful
After receiving the goods, you have to let the
compressor's lubricating oil settle for 24 hours to start the
use, otherwise it will easily damage the compressor.
If the ice machine is placed in a wet area, a disconnect
switch must be installed and the ice machine must be
grounded. Install the disconnect switch on the power line.
For further information, consult the ice machine retailer or
electrical technician.

- 8 -
Caution
Always use a plug with a grounding structure and ground
the ice machine to prevent electric shock during a leak.
Replacing a grounding terminal with a water pipe will not
provide proper grounding protection in many situations,
as plastic pipes are often used in plumbing.
Never ground the ice machine through a gas pipe as this
is very dangerous.
Never ground the ice machine by telephone line or
lightning protection, because if lightning lightning strikes,
a large current will be generated, which makes this
grounding very dangerous.
5.Nothing will fall to the ice machine.
6.Installation and operating instructions shall be provided with
cautionary statements concerning the handling, moving, and use of
the ice maker to avoid either damaging the refrigerant tubing, or
increasing the risk of a leak.
7.The installation and operating instructions shall indicate that
component parts shall be replaced with like components and that
servicing shall be done by factory authorized service personnel, so
as to minimize the risk of possible ignition due to incorrect parts or
improper service.
8.The installation instructions shall indicate the ice maker is to be
installed in accordance with the Safety Standard for Refrigeration
Systems, ASHRAE 15. In addition, the instructions shall indicate the
ice maker shall not be installed in corridors or hallways of public
buildings.
Environmental conditions:
This equipment is designed in accordance with the following
conditions:
1.Indoor use.

- 9 -
2.The altitude is not higher than 2000 meters.
3.The ambient temperature is in the range of 10 ° C to 32 ° C.
4.When the temperature is not higher than 31 °C, the maximum relative
humidity is 80%, and the maximum relative humidity decreases linearly
with increasing temperature.
5.The main power supply voltage fluctuation does not exceed ±10% of the
rated voltage.
6.In accordance with the equipment installation level (overvoltage level)
transient overvoltage.
This appliance is used for similar purposes such as:
a kitchen area in a store, office or other workplace;
Farmers as well as hotels, motels and residential environments; Family
hotel environment;
Catering industry and similar non-retail applications. This appliance is not
intended for general household use.
Correct operation
When using for the first time and continuous operation, please follow the
rules below.
1.Connect the ice maker to a special socket (the power supply is consistent
with the famous brand).
2.The ice machine needs to run for a long time to stabilize the temperature
in the ice storage room, and minimize the number of door opening during
this period.
3.The ice machine is surrounded by a cooling system for cooling the
system. It is forbidden to block the items.
4.After completing the inspection of the operation of the ice machine, turn
on the power of the ice machine and let the machine start making ice.
• Use an independent water source for the ice machine and check it
regularly to prevent low water pressure, fluctuations or filter clogging.
• Do not store any debris in the ice storage room, or freeze or freeze any
food in the ice storage room and keep the ice shovel clean.

- 10 -
• When the ice storage bucket is plasticized, it should be lightly opened and
closed. Do not drop the door. After the ice is finished, please close the
sliding door of the ice storage bin.
• The ice machine should be kept away from heat sources. It is strictly
forbidden to use in high temperature or low temperature environment. Try
to avoid direct sunlight, so as not to affect the heat dissipation of the
machine.
• Do not directly wash the surface of the ice machine by splashing water.
Otherwise, it may cause short circuit or electric leakage.
• After using the ice machine for a period of time, if it is left for a long time, it
should be energized every 4 months for 4 to 6 hours.
2. Installation instructions
Due to the product is updated and classified continuously, the

- 11 -
machine you get may not be as the same as the picture completely in
the manual.Please give your understanding. We will improve it
continously.
1. It should use the filtered drinking water with normal temperature to make
ice.
2. The pressure of water supply should be controlled between 130-550
kpa.If the water pressure is over high,please install a relief valve .Do not let
the hose be under high pressure.
3. Please connect the outside branch hose of the machine to the tap of the
drinking water filter. The filter has a sign to show the outlet and inlet.
4. Connect the inlet of the filter to the tap of the drinking water.
5. To ensure the smooth drainage of the machine, it is important to ensure
that the drainage pipeline is below the bottom surface of the machine. The
drainage pipe of the machine with a drainage pump has to be lower than
the bottom surface of the storage bin.
Warning
It’s merely permitted to connect to the drinking water
All-in-one installation

- 12 -
The instructions of the filter installation.
3. Operating Instructions
Function description of four-button digital tube operation panel.
The instructions of the filter installation
The instruction of the filter installation

- 13 -
①Power switch and deicing key after power on, click to enter the ice
making state; Click to enter the deicing state during the ice making
process; In the ice-making and de-icing state, press and hold for 3
seconds to enter the shutdown state.
②LED light：Represents the state of the machine
③Digital display tube
The left digital tube displays the ambient temperature and return air
temperature; The digital tube on the right shows the timing switch time
and ice making time.
④+- button;
Adjust the thickness of the ice cube in the off state; In the state of
timing off or timing on and off, Adjust timing switch time; Long press the
"-" button for 3 seconds to turn on or off the light.
⑤Cleaning and timing button
In standby mode, press the key continuously for 3 seconds, the system

- 14 -
enters the cleaning mode; Press this button when starting up to enter
the countdown of the scheduled shutdown, and then click to cancel the
scheduled shutdown; Press this button in the standby state to enter the
countdown of the scheduled power-on, and then click to cancel the
scheduled power-on; The displayed time unit is hour.
Button Operation Instructions
•Operation process
1. Plug in the power, click the ice machine switch button, the ice machine
starts to run.
2. Open the water inlet solenoid valve to enter the water. After the water
level rises, the floating ball floats up. When the water level reaches the
requirement, the water inlet valve is closed, and the cleaning program is
run. After the cleaning is completed, it will automatically enter the ice
making cycle.
3. When the thickness of the ice cube reaches the set thickness, the
deicing program starts, the solenoid valve starts to work, the water pump
stops working, the heat enters the evaporator, and the ice cube falls for
about 1.5 minutes. When the ice cube falls, the ice falling baffle Flip and
open the reed switch, when the reed switch closes again, the machine
goes back into the ice making process.
4. The compressor does not stop during the entire ice making and deicing
process.5. When the ice bucket is full of ice and the magnetic reed switch
cannot be closed automatically, the machine will automatically stop
working. When enough ice cubes are removed and the magnetic reed
switch is closed again, the machine will start up with a delay of 3 minutes
and re-enter the ice making process.
•Ice thickness adjustment
1. Press and hold the + key for 3 seconds and wait for the displayed
number to start flashing, then click the +- key to adjust the thickness of the
ice cubes. After clicking the + key, the displayed number will be minutes.

- 15 -
Each addition of 1 means that the ice making time will increase by 1 based
on the current ice making time. Minutes, the maximum is 25 minutes; each
minus 1 means that the ice making time is reduced by 1 minute based on
the current ice making time, and the minimum is -9 minutes. After
increasing the ice making time, the ice cubes will become thinner.
2. With the adjusted ice making time, after the current ice cube is deiced,
the next ice cube will be made according to the newly set ice making time.
Click the blue light switch to turn it on, otherwise turn it off.
•Scheduled power-on function
1. In the standby state, press the preset timing key to execute the timing
power-on function, the timing LED light is on, and the displayed number is
the remaining power-on time, and the unit is hour.
2. In the timing power-on state, click + or - to adjust the remaining
power-on time.
3. After executing the scheduled power-on, click the scheduled reservation
button to cancel the scheduled power-on.
•Ice full function
1. When the ice bucket is full of ice and the ice baffle cannot be closed
automatically, the machine will stop working automatically.
2. When the ice cubes are used up, the ice baffle will reset, and the
machine will automatically start up after a delay of 3 minutes. If the ice
maker stops due to fluctuations in voltage and water pressure, and does
not make ice or de-ice, please first After unplugging the power for 5
minutes, turn on the power to test the machine. Due to the change of water
temperature and ambient temperature, ice may sometimes appear in the
sink. If the ice is severe, please unplug the power for 10 minutes and then
turn on the power again.
3. When not in any setting interface, force the drainage pump to work for
60 seconds and then end (including standby and startup) by continuously
pressing the "-" button twice (effective within 2 seconds).
4. When the machine is powered on, the drainage pump automatically

- 16 -
starts for 20 seconds every 15 minutes and then turns off. Note: The
machine which is in full ice, ice making, deicing, adding water, lacking
water, and short-term cleaning all belong to the startup mode.
4. Precautions
Please follow the requirement of this manual to maintain your machine in
order to increase the reliability and longevity of this ice machine, also good
maintenance can avoid the over energy consumption.
1. Clean the environment around the ice machine frequently to keep it
clean, and do not block the louvers used for ventilation of the ice machine.
2. The shell can be cleaned with a neutral detergent, and then wiped with
a soft cloth. If necessary, commercial stainless steel cleaners and polishes
can be used.
3. Filters should be checked regularly and replaced with new filters
immediately if damaged.
4. The water tank of the ice machine and the interior of the ice storage
room can be washed directly with water pipes. Do not use too much water
pressure, and do not directly flush the water pump and the part above the
ice tray to prevent the circuit from being soaked.
5. Maintenance of air-cooled ice machine condenser: Clean the air-cooled
condenser once every three months. Use a soft brush or a vacuum cleaner
with a brush to brush the condenser fins up and down along the direction of
the fins to avoid damaging the fins and affecting the cooling effect.
Any kinds of maintentance are not including to the
warranty.
The filter elements should be changed regularly.
Please cut off the waterhead and electricity before you
clean or check the the machine.

- 17 -
If there is much dirt and scale in the machine,or the circuit
of pipes are blocked,please dial the telephone of after-sale
service. But, it will cost fees for the door to-door service.
The air-cooled condensor warping blade is very
sharpen.Be careful of getting hurt when you clean it.
Before you dial the telephone of the after-sale service
If the ice machine runs abnormally,please dial the telephone of after-sale
service . But,you need to confirm the following cases.
1. If the waterhead is normal or not.
The correct way to check it is to loosen the inlet joint(6 branch connector)
behind the machine.if it leaks normally when you loosen the joint to a
required value,it means normal. Otherwise,there is no water.
2. Confirm the machine if it is electrified or not.
Our ice machines are all fully automatic.So,some of models don’t have
electric switch. You can ask for a electric technician to help you
check.Mainly,you should pay attention to the socket.
3. The model number and serial number.
There is a nameplate on the front board,and there are model number and
serial number on the side board.
It will cost fees for the door-todoor service if the hitch
caused by the users(for example,no water,no
electricity,environment, etc)
To prevent from high-pressure water spraying ,do not
loosen the joint of the inlet completely when you check the
waterhead.
Plastic parts are not in including to the warranty.

- 18 -
Warranty
1. Our company agrees the warranty of the product within 1 year.The
labor cost and the replacement of components are free within the
warranty.
2. All the plastic parts are not including to the warranty.
3. Our warranty is limitted liability.Except the machine itself,any kinds of
joint liability is not in the warranty.
4. The routine maintenance ,cleaning,and all the hitchs from the
incorrect operation are not in the warranty.
5.All the warranty services should be finished by the machine dealers
or related institutes.
5.Troubleshooting of this series of machines
Fault
Possible cause
Solution
Ice machine
does not work
Not connected to the
power supply or water
supply.
1. Fuses 2. Power switch 3.
Cable 4. Water switch 5.
Power plug 6. Sockets
Ice tray baffle remains
open
If the ice tray baffle could
open and close automatically
The machine
stops 3 minutes
after it’s turned
on
High Voltage
Protection
1. High temperature
environment
2. Dirty condenser filter
3. Damaged fan motor

- 19 -
The machine can
only make
one tray of ice
every time it
is turned on
Ice full or ice tray baffle
remains open
1. If the ice tray baffle could
open and close automatically
2. The ice full switch whether
be falls
Ice could not fall
off the
ice tray
Dirty Ice Tray
Cleaning and disinfection
needs to be done
Machine not placed on
a level ground
Adjust the machine to a level
ground
Environment
temperature is too low
Environment temperature
should be higher 5 ℃
Faulty Solenoid valve
Replace the solenoid valve
Ice too thin or not
complete
Tank water level is too
low
Check the water level check
if there is any leakage
Inlet valve does not
work
Check the inlet valve
Not enough water
pressure
Water pressure must be at
0.13 - 0.55Mpa
Water pipes are
blocked
Check the pipes and joints
for dirt