VEVOR EEV0 User manual

Technical Support and E-Warranty Certificate
www.vevor.com/support
STEEL WIRE SHELF
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL: EEV0 / PAV0 / 4AV0
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
STEEL WIRE SHELF

- 2 -
IMPORTANT SAFETY INSTRUCTIONS
Warning - To reduce the risk of injury, user must read
instructions manual carefully.
This symbol, placed before a safety comment, indicates a
kind of precaution, warning, or danger. Ignoring this warning
may lead to an accident. To reduce the risk of injury, fire, or
electrocution, please always follow the recommendation
shown below.
Warning- Be sure to wear gloves when using this product.
1) Keep this manual for the safety warnings and precautions. The
manual offers important information on how to assemble, use and
maintain this product.
2) Please handle metal edges carefully.
3) DO NOT stand on this product or use it as a ladder.
4) DO NOT alter this product in any manner that is not intended, as this
may cause product damage or personal injury.
5) Always assemble on an even surface.
6) The maximum loaded weight for each shelf is no more than 180 kg,
evenly distributed.
7) Store the heaviest items on lower shelves.
8) Attach the unit to the wall if filling to capacity (fittings not included).
ASSEMBLY PRECAUTIONS
1. Please assemble the product in strict accordance with the instructions.
Incorrect assembly could be hazardous.
2. Please wear safety goggles and work gloves properly during assembly.
3.Do not try to assemble the product when feeling tired or when under the
influence of alcohol, drugs or medication.

- 3 -
4.Load bearing capacity and other product parameters are applied to the
properly and completely assembled product only.
5.A hammer and a pair of gloves may also be used, provided a cloth or
wood block is placed between the hammer head and the parts.
USE PRECAUTIONS
1.This product is not a toy. Do not allow children to play with or get access
to this item.
2.Check carefully before use. Do not use if parts get loosened or
damaged.
4.Use on flat, level, and hard surfaces only.
5.Do not exceed the listed load bearing capacity. Tighten all the knobs
securely before placing weights on. Be aware of the dynamic load bearing
capacity! Sudden load changes may temporarily cause excessive load,
resulting in product failure.
SAVE THESE INSTRUCTIONS
PRODUCT PARAMETERS
SKU
1
2
3
Model
EEV0
PAV0
4AV0
Product size
16×36×72inch
24×48×72inch
24×60×78inch
990×410×85mm
1300×620×82mm
1605×620×85mm
G.W.:
16.6kg
30.4kg
34.9kg
Total load limit
2000lbs
2000lbs
2000lbs
load limit for
each layer
400lbs
400lbs
400lbs

- 4 -
PART LIST
Part
Description
Picture
Part Qty
EEV0
PAV0
4AV0
16×36×72inch
24×48×72inch
24×60×78inch
A
Steel mesh
5
5
5
B
Upright post
8
8
8
C
Top shelf
short beam
10
10
10
D
Top shelf
long beam
10
10
10
E
Fixings
4
4
4
F
Post cap
16
16
16
G
Reinforcer
0
5
10
Height of separated
shelfs
36inch
36inch
39inch

- 5 -
Attention:
For additional information regarding the parts listed below, please
refer to the Assembly Diagram of this manual. Unwrap and separate all
parts in a clear work area.
ASSEMBLY STEP
Step 1: Post Cap Assembly
1. Slide each post (B) into post cap (F) as shown.
2. Repeat for all 4 upright posts.
Attention: post caps for upright feet only.
Top shelf beam rivets has
a design that allowing
Steel mesh to sit.
Top shelf beam rivets
have
a modified design,
allowing Steel mesh to

- 6 -
Step 2: Short and Long Beam Assembly
1. Align short beams (C) & top shelf long beam (D) to aligned notches between
four upright posts (B).
2. Once in position, tap firmly using a rubber mallet.
3. Repeat process for opposite side, ensuring both ends
are set at the same height.
Step 3: Fixings Assembly
1· Fix fixings(E) at the top of the upright post(B), and tap down to the end.

- 7 -
Step 4: Install The Upright Post
1.The bottom of the upright post(B) is secured to each fixing(E), and tap
down to the end.
Step 5: Install the third, fourth and fifth top shelf long beam(D) and
short beam(C); the installation method is the same as Step 2.

- 8 -
Step 6: Install the Reinforcer.
1. install part G on each part D.
SKU1 is without part G
Step 7:Steel Mesh Top Shelf Assembly
1.Insert steel mesh top shelf (A) on to the top shelf supports.
2. Ensure it sits flush with the top of the unit frame.

- 9 -
Step 8:Install The Top Glue Foot
1. Slide each post (B) into post cap (F) as shown.
2. Repeat for all 4 upright posts.
3. Assembly is now complete, and your unit is ready for use.
Attention: this product can be separated with two shelf. You can find the
height of each shelf in the table of part list.

- 10 -
Address：Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi
Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA STREETEASTWOOD
NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250, 9166 Anaheim
Place, Rancho Cucamonga, CA 91730
REP
UK
Pooledas Group Ltd
Unit 5 Albert Edward House, The Pavilions
Preston, United Kingdom
REP
EC
SHUNSHUN GmbH
Römeräcker 9 Z2021, 76351
Linkenheim-Hochstetten, Germany
Made In China

Technical Support and E-Warranty Certificate
www.vevor.com/support